Instrukcja obsługi Supermicro SuperServer 5018A-MLTN4

Supermicro serwer SuperServer 5018A-MLTN4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5018A-MLTN4 (17 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
SUPER
S SUPER ERVER
5018A-MLTN4
Revision 1.0b
®
®
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0a
Release Date: October 14, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 5018A-MLTN4.
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 5018A-MLTN4 is a 1U rackmount server based on the SC512L-
200B server chassis and the Super A1SAM-2550F motherboard. Please refer to
our web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the A1SAM-2550F motherboard
and the SC512L-200B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5018A-MLTN4
into a rack and check out the server conguration prior to powering up the system.
If your server was ordered without memory, this chapter will refer you to the ap-
propriate section of the manual for installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 5018A-MLTN4.
iii
Preface


Specyfikacje produktu

Marka: Supermicro
Kategoria: serwer
Model: SuperServer 5018A-MLTN4
Kolor produktu: Black,Blue,White
Pojemność zbiornika na wodę: 1.5 l
Regulowany termostat: Tak
Wbudowany wyłącznik: Tak
Bezprzewodowy: Nie
Automatyczne wyłączanie zasilania: Tak
Częstotliwość wejściowa AC: 50/60 Hz
Napięcie wejściowe AC: 230 - 240 V
Wysokość produktu: 233 mm
Szerokość produktu: 323 mm
Głębokość produktu: 194 mm
Waga produktu: 3000 g
Podręcznik użytkownika: Tak
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 5
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Typ procesora: Intel
Kod zharmonizowanego systemu (HS): 84714100
Liczba portów USB 2.0: 7
Przewodowa sieć LAN: Tak
Diody LED: Tak
Zakres temperatur (przechowywanie): -40 - 60 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Model: Żelazko suche i parowe
Ilość obsługiwanych rozmiarów dysków pamięci: 2
Obsługiwane rozmiary dysków pamięci: 3.5 "
Obudowa: Rack (1U)
Zabezpieczenie przed przegrzaniem: Tak
Obsługiwane rodzaje pamięci: DDR3-SDRAM
Bez kody korekcyjnego: Tak
Procesor: Intel Atom®
Typ BIOS: AMI
Ilość złączy SATA III: 2
Zasilanie: 200 W
Rodzaj interfejsu sieci Ethernet: Fast Ethernet, Gigabit Ethernet
Liczba portów VGA (D-Sub): 1
Silne uderzenie pary: - g/min
Tworzywo podstawki/stopki: Płyta ceramiczna
Funkcja spray'u: Tak
Pionowy strumień pary umożliwia prasowanie wiszących tkanin: Tak
Korekcja ECC: Tak
Rozmiar pamięci BIOS: 128 Mbit
Wersja ACPI: 5.0
Lampka kontrolna: Tak
Wskaźnik poziomu wody: Tak
Zmienna para wodna: Tak
Ciągły strumień pary: - g/min
Moc żelazka: 3200 W
Maksymalne ciśnienie pary: 5.5 bar
Ergonomiczny uchwyt: Tak
Szeregowe porty komunikacyjne: 1
Rodzaj pamięci: 240-pin DIMM
Napięcie pamięci: 1.35, 1.5 V
Ilość slotów DIMM: 4
Liczba obsługiwanych procesorów: 1
Prędkość zegara pamięci RDIMM: 1333,1600 MHz
Przemieszczanie twardej wnęki na napęd HDD: Tak
Ilość złączy SATA II: 4
PCI Express x8 slots: 1
Spiczasta końcówka do prasowania trudno dostępnych miejsc: Tak
Port IPMI LAN (RJ-45): Tak
Para pod ciśnieniem: 5.5 bar
Automatyczne wyłączanie: Tak
Funkcje BIOS: UEFI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 5018A-MLTN4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje serwer Supermicro

Instrukcje serwer

Najnowsze instrukcje dla serwer