Instrukcja obsługi Supermicro SuperServer 5018A-MHN4

Supermicro serwer SuperServer 5018A-MHN4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5018A-MHN4 (47 stron) w kategorii serwer. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/47

SUPER

S SUPER ERVER

5018A-MHN4

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: February 19, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018A-MHN4.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018A-MHN4 is a 1U rackmount server based on the SC813MTQ-

202CB server chassis and the Super A1SRM-2758F motherboard. Please refer to

our web site for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super A1SRM-2758F moth-

erboard and the SC813MTQ-202CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018A-MHN4

into a rack and check out the server conﬁ guration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018A-MHN4.

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 5018A-MHN4
Kolor produktu:	Srebrny
Wbudowany wyłącznik:	Tak
Wysokość produktu:	43 mm
Szerokość produktu:	437 mm
Głębokość produktu:	503 mm
Waga produktu:	3620 g
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	3
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel
Kod zharmonizowanego systemu (HS):	84714100
Liczba portów USB 2.0:	7
Przewodowa sieć LAN:	Tak
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	4
Obsługiwane rozmiary dysków pamięci:	3.5 "
Obudowa:	Rack (1U)
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Gniazdo procesora:	BGA 1283
Procesor:	Intel Atom®
Typ BIOS:	AMI
Ilość złączy SATA III:	2
Zasilanie:	200 W
Wspierane interfejsy dysków twardych:	druga generacja szeregowej magistrali komputerowej (serial ATA II)
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	5.0
Technologia okablowania Copper Ethernet:	1000BASE-T, 100BASE-TX, 10BASE-T
Model karty graficznej on-board:	Aspeed AST2400
Szeregowe porty komunikacyjne:	2
Rodzaj pamięci:	240-pin DIMM
Napięcie pamięci:	1.35, 1.5 V
Ilość slotów DIMM:	4
Liczba obsługiwanych procesorów:	1
Prędkość zegara pamięci RDIMM:	1333,1600 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Ilość złączy SATA II:	4
Obsługuje rozmiary DIMM:	16GB, 2GB, 4GB, 8GB
PCI Express x8 slots:	1
Port IPMI LAN (RJ-45):	Tak
Funkcje BIOS:	UEFI