Instrukcja obsługi Supermicro SuperServer 5018A-LTN4

Supermicro serwer SuperServer 5018A-LTN4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5018A-LTN4 (118 stron) w kategorii serwer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/118
SUPERSERVER
5018A-LTN4
User's Manual
Revision 1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: August 31, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 5018A-LTN4.
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 5018A-LTN4 is a compact server based on the SC504-203B
rackmountable chassis and the A1SAi-2750F single processor motherboard.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the A1SRi-2358F motherboard
and the SC504-203B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5018A-LTN4
into a rack and check out the server con guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: Standardized Warning Statements
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardzed Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 5018A-LTN4.
Chapter 5: Advanced Motherboard Setup
Chapter 5 provides detailed information on the A1SRi-2358F motherboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
recon guring the motherboard.


Specyfikacje produktu

Marka: Supermicro
Kategoria: serwer
Model: SuperServer 5018A-LTN4
Wysokość produktu: 43 mm
Szerokość produktu: 437 mm
Głębokość produktu: 249 mm
Waga produktu: 4500 g
Certyfikat środowiskowy (zrównoważonego rozwoju): EPEAT Gold
Certyfikaty: RoHS
Ilość portów Ethernet LAN (RJ-45): 4
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Taktowanie procesora: 1.7 GHz
Typ procesora: Intel Atom®
Model procesora: C2358
Karta graficzna: AST2400
Kod zharmonizowanego systemu (HS): 84714100
Liczba portów USB 2.0: 2
Przewodowa sieć LAN: Tak
Waga wraz z opakowaniem: 5440 g
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Producent procesora: Intel
Liczba rdzeni procesora: 2
Typ pamięci wewnętrznej: DDR3-SDRAM
Pamięć wewnętrzna: - GB
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 4
Obudowa: Rack (1U)
Maksymalna pojemność pamięci: 16 GB
Gniazdo procesora: BGA 1283
Typ BIOS: EEPROM
Ilość złączy SATA III: 2
Zasilanie: 200 W
Wspierane interfejsy dysków twardych: Serial ATA II, Serial ATA III
Rodzaj interfejsu sieci Ethernet: Gigabit Ethernet
Łączna liczba złączy SATA: 4
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Gniazda pamięci: 2
Rozmiar HDD: - "
Całkowita pojemność przechowywania: 0 GB
Obsługiwane rozmiary dysków twardych: 2.5, 3.5 "
Procesor ARK ID: 77978
Technologia Intel® Hyper Threading (Intel® HT Technology): Nie
Technologia Intel® Turbo Boost: 2.0
Nowe instrukcje AES (Intel® AES-NI): Tak
Intel® VT-x with Extended Page Tables (EPT): Tak
Intel® 64: Tak
Technologia virtualizacji Intel® (VT-x): Tak
Maksymalna pojemność przchowywania: - TB
Liczba procesorów: 1
Typ pamięci procesora: L3
Cache procesora: 1 MB
Wskaźnik magistrali systemowej: - GT/s
Maksymalne taktowanie procesora: 2 GHz
Litografia procesora: 22 nm
Liczba wątków: 2
Tryb pracy procesora: 32-bit, 64-bit
Nazwa kodowa procesora: Rangeley
Maksymalna pamięć wewnętrzna wspierana przez procesor: 16 GB
Typy pamięci wspierane przez procesor: DDR3-SDRAM, DDR3L-SDRAM
Taktowanie zegara pamięci wspierane przez procesor: 1333 MHz
Kanały pamięci wspierane przez procesor: Pojedyńczy
Pamięć ECC wspierana przez procesor: Tak
Maksymalna liczba linii PCI Express: 8
Konfiguracje PCI Express: x1, x2
Termiczny układ zasilania (TDP): 7 W
Bezkonfliktowy procesor: Tak
Stepping: B0
Kod procesora: SR1D2
Technologia Execute Disable Bit (EDB): Tak
Wbudowane opcje dostępne: Tak
Wielkość opakowania procesora: 34 x 28 mm
Moduł TPM (Trusted Platform Module): Tak
Wersja TPM: 1.2
Prędkość zegara pamięci: 1333 MHz
Liczba głównych źródeł zasilania: 1
Szeregowe porty komunikacyjne: 1
Wersja gniazd typu Slot (PCI Express): 2.0
Magistrala systemowa: - MHz
Seria procesora: Intel Atom C2000 for Communications
Układ graficzny i litografia IMC: 22 nm
Napędy optyczne: Nie
Physical Address Extension (PAE): Tak
Rozszerzenie PAE (Physical Address Extension): 36 bit
Wewnętrzne kieszenie na napęd: 4
Ilość złączy SATA II: 2
UART: Tak
PCI Express x8 (Gen 2.x) slots: 1
Technologia Intel® QuickAssist: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro SuperServer 5018A-LTN4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje serwer Supermicro

Instrukcje serwer

Najnowsze instrukcje dla serwer