Instrukcja obsługi Supermicro SuperServer 1027R-WC1RT

Supermicro serwer SuperServer 1027R-WC1RT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 1027R-WC1RT (120 stron) w kategorii serwer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/120

S SUPER ERVER

1027R-WC1R

1027R-WC1RT

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: October 14, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 1027R-

WC1R/1027R-WC1RT. Installation and maintainance should be performed by

experienced technicians only.

The SuperServer 1027R-WC1R/1027R-WC1RT is a high-end server based on

the SC116AC-R700WB 1U rackmount chassis and the X9DRW-CF31/CTF31 dual

processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DRW-CF31/CTF31

serverboard and the SC116AC-R700WB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 1027R-

WC1R/1027R-WC1RT into a rack and check out the server conﬁ guration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1027R-WC1R/1027R-WC1RT.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 1027R-WC1RT
Kolor produktu:	Srebrny
Wbudowany wyłącznik:	Tak
Wysokość produktu:	43 mm
Szerokość produktu:	437 mm
Głębokość produktu:	597 mm
Waga produktu:	20900 g
Prędkość transferu danych przez Ethernet LAN:	10,100,1000,10000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	3
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel
Kod zharmonizowanego systemu (HS):	84714100
Liczba portów USB 2.0:	6
Przewodowa sieć LAN:	Tak
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 60 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	1
Obsługiwane rozmiary dysków pamięci:	2.5 "
Obudowa:	Rack (1U)
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Gniazdo procesora:	LGA 2011 (Socket R)
Procesor:	Intel® Xeon®
Układ płyty głównej:	Intel® C602J
Poziomy raid:	0, 1
Typ BIOS:	AMI
PCI Express x16 gniazda:	2
Ilość złączy SATA III:	2
Zasilanie:	700 W
Wspierane interfejsy dysków twardych:	Serial Attached SCSI (SAS), Serial ATA
Rodzaj interfejsu sieci Ethernet:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel® X540
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	4.0
Technologia okablowania Copper Ethernet:	1000BASE-T, 100BASE-TX, 10GBASE-T
Wskaźnik magistrali systemowej:	8 GT/s
Rodzaj pamięci:	240-pin DIMM
Napięcie pamięci:	1.35, 1.5 V
Intel® Xeon series:	E5-2600
Ilość slotów DIMM:	16
Liczba obsługiwanych procesorów:	2
Prędkość zegara pamięci RDIMM:	800,1066,1333,1600,1866 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Obsługuje rozmiary DIMM:	16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Port IPMI LAN (RJ-45):	Tak
Maksymalna pamięć podręczna:	30 MB
Liczba portów SAS:	8
Funkcje BIOS:	UEFI