Instrukcja obsługi Supermicro SuperServer 1027GR-TR2

Supermicro serwer SuperServer 1027GR-TR2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 1027GR-TR2 (124 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/124

SUPER

S SUPER ERVER

1027GR-TRF

1027GR-TRFT

USER’S MANUAL

Revision 1.0b

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0b

Release Date: February 19, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 1027GR-

TRF/1027GR-TRFT. Installation and maintenance should be performed by experi-

enced technicians only.

The 1027GR-TRF/1027GR-TRFT is based on the SC118GQ-R1800B 1U rackmount

server chassis and the Super X9DRG-HF/X9DRG-HTF serverboard. Please refer

to our web site for an up-to-date list of supported operating systems, processors

and memory. See Chapter 1 for a list of differences between the server models.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X9DRG-HF/X9DRG-

HTF serverboard and the SC118GQ-R1800B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the system into a rack and

check out the server conﬁ guration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

system.

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 1027GR-TR2
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	178 mm
Szerokość produktu:	437 mm
Głębokość produktu:	889 mm
Waga produktu:	30400 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Procesor wbudowany:	Nie
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	4
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Kod zharmonizowanego systemu (HS):	84714100
Liczba portów USB 2.0:	9
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	47200 g
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	72
Obsługiwane rozmiary dysków pamięci:	3.5 "
Obudowa:	Rack (1U)
Liczba wentylatorów:	7 went.
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Maksymalna pojemność pamięci:	1000 GB
Gniazdo procesora:	LGA 2011 (Socket R)
Procesor:	Intel® Xeon®
Układ płyty głównej:	Intel® C602
Poziomy raid:	0, 1,5, 10
Typ BIOS:	AMI
Ilość złączy SATA III:	2
Zasilanie:	2000 W
Wspierane interfejsy dysków twardych:	Serial Attached SCSI (SAS)-2, Serial ATA III
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Liczba portów VGA (D-Sub):	1
Obsługa funkcji Plug & Play:	Tak
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	16 Mbit
Wersja systemu BIOS (SMBIOS):	2.3
Technologia okablowania Copper Ethernet:	10GBASE-T, 100BASE-TX, 1000BASE-T
Wskaźnik magistrali systemowej:	8 GT/s
Wersja gniazd typu Slot (PCI Express):	3.0
Wsparcie wentylatorów nadmiarowych:	Tak
Rodzaj pamięci:	240-pin DIMM
Napięcie pamięci:	1.35, 1.5 V
Ilość slotów DIMM:	16
Liczba obsługiwanych procesorów:	2
Prędkość zegara pamięci RDIMM:	800,1066,1333,1600,1866 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Ilość zainstalowanych, nadmiarowych źródeł zasilania:	1
Średnica czaszy wentylatora:	90 mm
Ilość złączy SATA II:	4
Maksymalna pojemność pamięci RDIMM:	512 GB
Maksymalna pojemność pamięci UDIMM:	128 GB
Prędkość zegara pamięci UDIMM:	800,1066,1333,1600,1866 MHz
Obsługuje rozmiary DIMM:	1GB, 2GB, 4GB, 8GB, 16GB, 32GB
PCI Express x8 slots:	4
Prąd stały (+5 V):	4 A
Port IPMI LAN (RJ-45):	Tak
Maksymalna pamięć podręczna:	30 MB
Typ magistrali systemowej:	QuickPath Interconnect (QPI)
Liczba portów SAS:	8
Funkcje BIOS:	APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI