Instrukcja obsługi Supermicro MicroBlade MBI-6119G-T7LX

Supermicro serwer MicroBlade MBI-6119G-T7LX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro MicroBlade MBI-6119G-T7LX (80 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/80

MBI-6219G-T7LX

MBI-6119G-T7LX

MicroBlade Module

User’s Manual

Revison 1.0

MBI-6219G-T7LX /MBI-6119G-T7LX Blade Server Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY

EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0

Release Date: September 15, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of both the Supermicro MBI-6219G-T7LX and MBI-6119G-T7LX

MicroBlade modules. Installation and maintenance should be performed by experienced

professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the

MicroBlade modules and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the MicroBlade

modules.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the MicroBlade modules into the MicroBlade

chassis. Other sections cover the installation and placement of memory modules and

the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about the MicroBlade modules.

Included here are descriptions and information for mainboard components, connectors,

LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for the MicroBlade modules.

Appendix A: BIOS POST Codes

BIOS POST Codes for the MicroBlade modules are explained in this appendix.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	MicroBlade MBI-6119G-T7LX
Kolor produktu:	Grey, Silver
Wysokość produktu:	30.48 mm
Szerokość produktu:	125.48 mm
Głębokość produktu:	589.28 mm
Prędkość transferu danych przez Ethernet LAN:	10000 Mbit/s
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	2270 g
Diody LED:	Fault, Network, Power
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	1
Obsługiwane rozmiary dysków pamięci:	2.5 "
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Maksymalna pojemność pamięci:	32 GB
Gniazdo procesora:	BGA 1440
Procesor:	Intel® Xeon®
Układ płyty głównej:	Intel® C236
Typ BIOS:	UEFI AMI
Wspierane interfejsy dysków twardych:	M.2, Serial ATA III
Rodzaj interfejsu sieci Ethernet:	10 Gigabit Ethernet
Dołączona myszka:	Nie
Bezpieczeństwo:	EN60950-1, CE, TUV
Korekcja ECC:	Tak
Wersja ACPI:	5.0
Wskaźnik magistrali systemowej:	8 GT/s
W zestawie klawiatura:	Nie
Napięcie pamięci:	1.2 V
Ilość slotów DIMM:	2
Liczba obsługiwanych procesorów:	1
Magistrala pamięci:	72 bit
Wspierane taktowanie procesora (max):	3.4 GHz
Maksymalna pojemność pamięci UDIMM:	32 GB
Prędkość zegara pamięci UDIMM:	1600,1866,2133 MHz
Maksymalna pamięć podręczna:	8 MB
Funkcje BIOS:	APM 1.2, PCI 3.0, Plug & Play, UEFI