Instrukcja obsługi Supermicro DVM-TEAC-DVD-SBT4

Supermicro odtwarzacz DVD DVM-TEAC-DVD-SBT4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro DVM-TEAC-DVD-SBT4 (108 stron) w kategorii odtwarzacz DVD. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/108
S SUPER ERVER
2026T-URF4+
SUPER ®
USER’S MANUAL
1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0
Release Date: July 1, 2011
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 2026T-URF4+.
Installation and maintenance should be performed by experienced technicians
only.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X8DTU-LN4F+ serverboard
and the SC219TQ-R920UBP chassis, which comprise the SuperServer 2026T-
URF4+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2026T-URF4+.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X8DTU-LN4F+ serverboard, includ-
ing the locations and functions of connections, headers and jumpers. Refer to this

Specyfikacje produktu

Marka: Supermicro
Kategoria: odtwarzacz DVD
Model: DVM-TEAC-DVD-SBT4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro DVM-TEAC-DVD-SBT4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odtwarzacz DVD Supermicro

Supermicro

Supermicro DVM-TEAC-DVD-SBT4 Instrukcja

29 Lipca 2024

Instrukcje odtwarzacz DVD

Najnowsze instrukcje dla odtwarzacz DVD

AKAI

AKAI ad70h Instrukcja

14 Stycznia 2025
Qmedia

Qmedia QDVD-060 Instrukcja

14 Stycznia 2025
Medion

Medion LIFE P72022 (MD 84873) Instrukcja

13 Stycznia 2025
Samsung

Samsung DVD-P146 Instrukcja

10 Stycznia 2025
Samsung

Samsung DVD-E319 Instrukcja

10 Stycznia 2025
Samsung

Samsung DVD-S426KG Instrukcja

10 Stycznia 2025
LG

LG DR176H Instrukcja

10 Stycznia 2025
LG

LG DAT-200 Instrukcja

10 Stycznia 2025
LG

LG D76 Instrukcja

10 Stycznia 2025
LG

LG DVX141 Instrukcja

9 Stycznia 2025