Instrukcja obsługi Supermicro CSE-216BE1C-R609JBOD

Supermicro macierz dyskowa CSE-216BE1C-R609JBOD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro CSE-216BE1C-R609JBOD (92 stron) w kategorii macierz dyskowa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/92
USER’S MANUAL
Revision 1.0a
SC216B JBOD
Storage Enclosure Series
CSE-216BE1C-R609JBOD CSE-216BE2C-R609JBOD
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A or Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in
industrial environment for Class A device or in residential environment for Class B device. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the manufacturer’s instruction manual, may cause harmful interference with
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
Manual Revision 1.0a
Release Date: May 27, 2021 mk
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2021 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the chassis. Installation and
maintenance should be performed by experienced technicians only.
This document lists compatible parts available when this document was published.
Refer to the Supermicro web site for updates on supported parts and congurations
This manual may be periodically updated without notice. Please check the
Supermicro Web site for possible updates.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.


Specyfikacje produktu

Marka: Supermicro
Kategoria: macierz dyskowa
Model: CSE-216BE1C-R609JBOD
Kolor produktu: Czarny
Wysokość produktu: 89 mm
Szerokość produktu: 437 mm
Głębokość produktu: 630 mm
Waga produktu: 14060 g
Zakres temperatur (eksploatacja): 5 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Układ: Stojak
Kod zharmonizowanego systemu (HS): 84717020
Waga wraz z opakowaniem: 27670 g
Diody LED: LAN
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Model: Serwer
Klasa urządzenia: Large Enterprise Business
Zainstalowane urządzenie pamięci masowej: Nie
Całkowita pojemność zainstalowanej pamięci: - TB
Ilość obsługiwanych rozmiarów dysków pamięci: 24
Rodzaje zainstalowanych dysków: Nie
Obsługiwane rodzaje dysków: HDD
Obudowa: Rack (2U)
Zasilanie: 600 W
Liczba obsługiwanych HDD: 24
Przycisk reset: Tak
Zasilacz dołączony: Tak
Przycisk Włączania/wyłączania: Tak
Maksymalna obsługiwana pojemność: - TB
Ilość zatok 3.5": 34
Obsługiwane rozmiary dysków twardych: 3.5 "
Hot-swap: Tak
Zainstalowane wentylatory tylne: 3x 80mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro CSE-216BE1C-R609JBOD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje macierz dyskowa Supermicro

Instrukcje macierz dyskowa

Najnowsze instrukcje dla macierz dyskowa

Icy Box

Icy Box IR2622 Instrukcja

29 Grudnia 2024
QNAP

QNAP TR-004U Instrukcja

11 Października 2024
Vantec

Vantec EZ Swap M2500 Instrukcja

7 Października 2024
Vantec

Vantec EZ Swap M3500 Instrukcja

7 Października 2024
Enhance

Enhance E400FR-F4T Instrukcja

4 Października 2024
Enhance

Enhance E400FR Instrukcja

4 Października 2024
Enhance

Enhance E800MS-F8TR Instrukcja

4 Października 2024
IStarUSA

IStarUSA BPX-124-SA Instrukcja

4 Października 2024