Instrukcja obsługi Supermicro AOC-SASLP-MV8

Supermicro sterownik AOC-SASLP-MV8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro AOC-SASLP-MV8 (20 stron) w kategorii sterownik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

AOC-SASLP-MV8 Add-on Card

User’s Manual

Revison 1.0a

AOC-SASLP-MV8 Add-on Card User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0a

Release Date: March 10, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document. Information in this document is subject to change without notice.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Table of Contents

Chapter 1 Safety Guidelines ..........................................................1-1

1-1 ESD Safety Guidelines..................................................................... 1-1

1-2 General Safety Guidelines............................................................... 1-1

1-3 An Important Note to Users .............................................................1-1

Chapter 2 Connectors, Jumpers and Indicators............... 2-1

2-1 Connectors......................................................................................... 2-1

Internal SAS Connectors ........................................................................ 2-1

2-2 Jumpers .............................................................................................. 2-2

2-3 LED Indicators ...................................................................................2-2

Chapter 3 Installing Drivers and Firmware........................... 3-1

3-1 Creating a Driver Floppy Disk ......................................................... 3-1

3-2 Adding the Driver into an Existing System....................................3-2

3-3 Installing the Driver into a New System.........................................3-2

3-4 Getting Firmware Downloads .......................................................... 3-4

3-5 Flashing Firmware............................................................................. 3-4

Chapter 4 Troubleshooting.............................................................4-1

4-1 Troubleshooting Problems............................................................... 4-1

4-2 Contacting Supermicro's Technical Support ................................. 4-2

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	sterownik
Model:	AOC-SASLP-MV8
Wysokość produktu:	120.6 mm
Szerokość produktu:	63.5 mm
Diody LED:	Tak
Poziomy raid:	JBOD
Szybkość przesyłania danych:	3 Gbit/s
Wspierane interfejsy dysków twardych:	SAS, Serial ATA
Ilość obsługiwanych urządzeń:	8
Porty wewnętrzne mini-SAS:	8
Rozmiar karty PCI:	Połowa wysokości (niskoprofilowe)
Obsługa SSD:	Nie