Instrukcja obsługi Supermicro AOC-MG-B2M

Supermicro karta/adapter sieciowy AOC-MG-B2M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro AOC-MG-B2M (23 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/23

User's Guide

Revision 1.0

AOC-MG-b2

User's Guide Revision 1.0

Release Date: July 16, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this user's guide, or to

notify any person or organization of the updates. Please Note: For the most up-to-date version

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this user's guide at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

The products sold by Supermicro are not intended for and will not be used in life support systems,

medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency

communication devices or other critical systems whose failure to perform be reasonably expected

to result in signicant injury or loss of life or catastrophic property damage. Accordingly, Supermicro

disclaims any and all liability, and should buyer use or sell such products for use in such ultra-

hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands,

actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous

use or sale.

Preface

About this User's Guide

This user's guide is written for system integrators, PC technicians, and

knowledgeable PC users. It provides information for the installation and use of the

AOC-MG-b2 add-on card.

About this Add-on Card

The Supermicro AOC-MG-b2 features Broadcom’s eld-proven dual-port NetXtreme

BCM5720 Ethernet controller to deliver lower power consumption and Energy

E󰀩cient Ethernet (EEE). In small form factor SIOM, this adapter is supported in

Supermicro Twin and SuperStorage servers. The Supermicro AOC-MG-b2 provides

a reliable, high-performance, energy-e󰀩cient 1 GbE connectivity solution.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

revision available at the time of publishing. The card you have received may or may

not look exactly the same as the graphics shown in this user's guide.

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your ven-

dor for a Returned Merchandise Authorization (RMA) number. When returning the

add-on-card to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and the shipping package is mailed prepaid

or hand-carried. Shipping and handling charges will be applied for all orders that

must be mailed when service is complete. For faster service, You can also request

a RMA authorization online (http://www.supermicro.com).

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

Preface

iii

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	karta/adapter sieciowy
Model:	AOC-MG-B2M
Szerokość produktu:	92 mm
Głębokość produktu:	87.1 mm
Technologia łączności:	Przewodowa
Obsługiwane systemy operacyjne Windows:	Tak
Przeznaczenie:	Serwer
Maksymalna szybkość przesyłania danych:	1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Wewnętrzny:	Tak
Zakres temperatur (eksploatacja):	0 - 55 °C
Przewodowa sieć LAN:	Tak
Pobór mocy:	4.2 W
Pozostałe obsługiwane systemy operacyjne:	VMware ESX/ESXi 4.0 U4, VMware ESX/ESXi 4.1 U2, VMware ESX/ESXi 5.0, VMware ESX/ESXi 5.0 U1, VMware ESX/ESXi 5.1, VMware ESX/ESXi 6.0, VMware ESX/ESXi 6.5, VMware vSphere 5.0+, VMware vSphere ESXi
Zakres temperatur (przechowywanie):	-40 - 65 °C
Dopuszczalna wilgotność względna:	0 - 90 %
Standardowe rozwiązania komunikacyjne:	Ethernet
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Broadcom BCM5720
Funkcja Wake-On-LAN:	Tak
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	9600