Instrukcja obsługi Supermicro AOC-CTG-i2S

Supermicro karta/adapter sieciowy AOC-CTG-i2S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro AOC-CTG-i2S (19 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/19

User's Guide

Revision 1.0

AOC-CTG-i2S

User's Guide Revision 1.0

Release Date: September 21, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this user's guide, or to

notify any person or organization of the updates. Please Note: For the most up-to-date version

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this user's guide at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this User's Guide

This user's guide is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

AOC-CTG-i2S add-on card.

About this Add-on Card

The AOC-CTG-i2S 10 Gigabit Ethernet Adapter is a exible and scalable Ether-

net adapter designed for demanding data center environments. Based on Intel's

82599ES 10GbE network controller, the AOC-CTG-i2S addresses the demanding

needs of next-generation data centers by providing virtualization features, LAN and

SAN networking exibility, and proven reliable performance. The AOC-CTG-i2S is

designed in a small microLP form factor to t within Supermicro MicroCloud and

Twin server systems.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this user's guide.

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your ven-

dor for a Returned Merchandise Authorization (RMA) number. When returning the

motherboard to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and the shipping package is mailed prepaid

or hand-carried. Shipping and handling charges will be applied for all orders that

must be mailed when service is complete. For faster service, You can also request

a RMA authorization online (http://www.supermicro.com).

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

Preface

iii

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	karta/adapter sieciowy
Model:	AOC-CTG-i2S
Szerokość produktu:	123.2 mm
Głębokość produktu:	39 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Ilość portów USB:	2
Standardy komunikacyjne:	IEEE 802.3ae
Maksymalna szybkość przesyłania danych:	10240 Mbit/s
Wewnętrzny:	Tak
Zakres temperatur (eksploatacja):	0 - 55 °C
Układ:	microLP
Wi-Fi:	Nie
Przewodowa sieć LAN:	Tak
Pobór mocy:	8 W
Standardowe rozwiązania komunikacyjne:	Ethernet
Protokoły zarządzające:	SNMP, RMON
System operacyjny:	Microsoft Windows 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012, Vista, \r\nRedHat EL, SuSe SLES, \r\nFreeBSD, \r\nVMWare
Obsługiwane protokoły sieciowe:	Tx/Rx IP, SCTP, TCP, UDP, IPv4, IPv6
Złącze(a):	2x SFP+
Interfejs hosta:	PCI Express
Połączenie z pc (personal computer):	Tak