Instrukcja obsługi Supermicro 5015A-EHF-D525

Supermicro serwer 5015A-EHF-D525

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro 5015A-EHF-D525 (90 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/90

SUPER

USER’S MANUAL

Revision 1.0

S SUPER ERVER 5015A-EHF-D525

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: October 18, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5015A-EHF-

D525. Installation and maintainance should be performed by experienced techni-

cians only.

The SuperServer 5015A-EHF-D525 is a single processor 1U mini rackmount server

based on the SC502L-200B server chassis and the Intel® Atom™ X7SPE-HF-D525

motherboard.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7SPE-HF-D525

motherboard and the SC502L-200B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5015A-

EHF-D525 into a rack and check out the server conﬁ guration prior to powering

up the system. If your server was ordered without the processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	5015A-EHF-D525
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	43 mm
Szerokość produktu:	437 mm
Głębokość produktu:	249 mm
Waga produktu:	4500 g
Certyfikaty:	RoHS
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	0 - 50 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel Atom®
Liczba portów USB 2.0:	8
Przewodowa sieć LAN:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	1
Obsługiwane rozmiary dysków pamięci:	3.5 "
Obudowa:	Rack (1U)
Ilość jednostek zasilania:	1
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Bez kody korekcyjnego:	Tak
Maksymalna pojemność pamięci:	4 GB
Gniazdo procesora:	BGA 559
Poziomy raid:	0, 1,5, 10
Typ BIOS:	AMI
Liczba portów PS/2:	2
Zasilanie:	200 W
Wspierane interfejsy dysków twardych:	druga generacja szeregowej magistrali komputerowej (serial ATA II)
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Kontroler LAN:	Intel® 82574L
Liczba portów VGA (D-Sub):	1
Typ zasilacza:	AC/DC
Rozmiar pamięci BIOS:	8 Mbit
Wersja ACPI:	3.0
Wskaźnik magistrali systemowej:	2.5 GT/s
Model karty graficznej on-board:	Matrox G200eW
Obsługa zasilania zapasowego (RPS):	Nie
Szeregowe porty komunikacyjne:	1
Napędy optyczne:	Nie
Rodzaj pamięci:	204-pin SO-DIMM
Napięcie pamięci:	1.5 V
Ilość slotów DIMM:	2
Liczba obsługiwanych procesorów:	1
Przemieszczanie twardej wnęki na napęd HDD:	Nie
PCI Express x4 slots:	1
Wspierane taktowanie procesora (max):	1.8 GHz
Maksymalna pojemność pamięci UDIMM:	4 GB
Prędkość zegara pamięci UDIMM:	800 MHz
Obsługuje rozmiary DIMM:	1GB, 256MB, 2GB, 512MB
Maksymalna pamięć podręczna:	1 MB
Funkcje BIOS:	PCI 2.2, Plug & Play, SMBIOS 2.3
Kontroler pamięci:	Intel ICH9R