Instrukcja obsługi Supermicro 2015TA-HTRF

Supermicro serwer 2015TA-HTRF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro 2015TA-HTRF (94 stron) w kategorii serwer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/94
SUPER
USER’S MANUAL
Revision 1.0
®
2U Twin3TM
SuperServer 2015TA-HTRF
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0
Release Date: April 19, 2011
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 2015TA-HTRF.
Installation and maintenance should be performed by experienced technicians
only.
The SuperServer 2015TA-HTRF is a 2U Twin3 (eight serverboards/nodes in a 2U
chassis) rackmount server based on the SC217HO-R720B server chassis and eight
Super X7SPT-DF-D525 serverboards.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7SPT-DF-D525
serverboard and the SC217HO-R720B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 2015TA-HTRF
into a rack and check out the server con guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2015TA-HTRF.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X7SPT-DF-D525 serverboard,
including the locations and functions of connectors, headers and jumpers. Refer
iii
Preface


Specyfikacje produktu

Marka: Supermicro
Kategoria: serwer
Model: 2015TA-HTRF
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 88 mm
Szerokość produktu: 438 mm
Głębokość produktu: 679 mm
Waga produktu: 38600 g
Ilość portów Ethernet LAN (RJ-45): 3
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Taktowanie procesora: 1.8 GHz
Typ procesora: Intel Atom®
Karta graficzna: G200eW
Liczba portów USB 2.0: 6
Przewodowa sieć LAN: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci: 24
Liczba rdzeni procesora: 2
Obudowa: Rack (2U)
Ilość jednostek zasilania: 2
Maksymalna pojemność pamięci: 16 GB
Procesor: Intel Atom®
Poziomy raid: 5, 10
Liczba portów PS/2: 2
Wymiary produktu (SxGxW): 438 x 679 x 88 mm
Zasilanie: 720 W
Kontroler LAN: Intel® 82576EB
Liczba portów VGA (D-Sub): 1
System operacyjny: Windows, Linux 32/64
Typ zasilacza: AC/DC
Dołączone oprogramowanie: - IPMI v1.5 / 2.0 with KVM support\r\n- Super Doctor III\r\n- Watch Dog
Rodzina adaptera graficznego: Matrox
Korekcja ECC: Nie
Pamięć karty graficznej podsystemu graficznego: 16 MB
Gniazda pamięci: 8
Liczba równoległych portów komunikacyjnych: 2
Liczba procesorów: 1
Wskaźnik magistrali systemowej: 2.5 GT/s
Obsługa zasilania zapasowego (RPS): Tak
Liczba głównych źródeł zasilania: 1
Napędy optyczne: Nie
Przemieszczanie twardej wnęki na napęd HDD: Tak
Typ pamięci adaptera grafiki: GDDR2
Mostek południowy płyty głównej: Intel ICH9
Cache l2: 1 MB
Standardowe wentylatory: 80 mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro 2015TA-HTRF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje serwer Supermicro

Instrukcje serwer

Najnowsze instrukcje dla serwer