Instrukcja obsługi Super SP-502CD

Super Multimedia SP-502CD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Super SP-502CD (17 stron) w kategorii Multimedia. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
USER MANUAL
CAR AUDIO SYSTEM
FLIP DOWN AND REMOVABLE CONTROL PANEL
REMOTE CONTROL
CONTROL PANEL USB PORT AND AUX INPUT
SD Card Slot
CD/MP3/WMA DISC PLAYER
BUILT-IN AM/FM-RDS TUNER
Remark: Any information subject to change without further notice
PWR
MUTE
VOL-
SEL
AF
VOL+
PTY
TA
MOD DISP
ID3
BAND
APS
SEARCH
SCAN
123
456
/TOP
INT
-10
RPT
RDM
+10
ENTER
SP-502CD
-1-
Content
1. Installation steps..........................................................................
2. General knowledge about remote control .....................................
2.1 Removing insulating sheet.........................................................
2.2 Replace lithium cell....................................................................
2.3 Note about using remote control................................................
2.4 Warning for lithium cells of remote control.................................
3. Locations and Names of controls..................................................
3.1 Locations and Names of controls on main unit............................
3.2 Locations and Names of controls on remote control...................
4. Conjunct operation............................................... ......................
5. Radio operation.................................................... ......................
6. Disc/USB/card operation............ ................................................
6.1 Loading or unloading a disc, USB or card..................................
6.1.1 Loading a disc, USB or card....................................................
6.1.2 Unloading a disc, USB or card.................................................
6.2 Function of controls on main unit or remote control...................
7. AUX IN operation......................................... ...............................
8. Trouble shooting.........................................................................
9. Specification...............................................................................
2
6
6
6
6
6
7
7
8
9
10
12
12
12
12
13
14
15
16
1. INSTALLATION STEPS
1. Remove 2 screws for protecting deck;
1) Remove chassis from Slide Bracket Housing as bellows:
2) Remove 2 screws for protecting deck as right;
2. Connecting all wires
1) Making chassis wear Slide Bracket Housing again;
2) Remove control panel from chassis as follows:
A. Press OPEN button to flip down control panel .
B. Slide control panel rightwards a little, and pull it towards you .
-2-
OPEN button
PLASTIC TRIM OUT
KEY PLATE
KEY PLATE
If you want to remove chassis from Slide Bracket Housing , first remove Plastic
trim out at both sides, then insert 2 Key Plates into left and right side of chassis as
above illustration.


Specyfikacje produktu

Marka: Super
Kategoria: Multimedia
Model: SP-502CD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Super SP-502CD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą