Instrukcja obsługi Sunstech CRUD386i

Sunstech CD-spelers/recorder CRUD386i

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sunstech CRUD386i (56 stron) w kategorii CD-spelers/recorder. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
Mp3
Mp3
INSTRUCTION MANUAL
FM STEREO RADIO WITH PLL TUNING
CD/MP3/AUX /USB/IPOD
CRUD386i
PORTABLE RADIO CD PLAYER
For Customer Use
Enter below the Serial No. which is located
On the bottom of the cabinet. Retain this
Infor mation for futu re reference.
Mo de No.:
Serial No.:
EN-2
PREPARATION FOR USE
Unpacking and Setup
* Carefully remove the unit from the display carton and remove all packing material from the unit itself.
* Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not
remove any labels located on either the back or button cabinet of the unit.
* Press the CD door OPEN Button to open the CD compartment door. There is a white card in the CD
compartment which is intended to prevent the CD pickup from moving during shipment of the product,
Remove this card from the CD compartment before use.
Using AC power
1.Check if the power voltage, as shown on the type plate located on the bottom of the set,
corresponds to your local AC power supply. If it does not , consult your dealer or service centre.
2.Connect the power cord to the AC inlet and the wall outlet. the power supply is nowsocket
connected and ready for use.
3.To switch off completely, unplug the power cord from the wall outlet.
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
,
,
,
,
,
,
,
,
Batteries (not included)
Open the battery compartment and insert batteries, type LR14, UM-2 or C-cells,
(preferably Alkaline) with the correct polarity as indicated by the + and - symbols
inside the compartment
Batteries contains chemical substances, so they should be disposed of properly.
Incorrect use of batteries can cause electrolyt leakage and will corrode the compartment or
cause the batteries to burst. Therefore:
Do not mix battery types: e.g. alkaline with carbon Zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to mix old batteries with new ones.
Remove the batteries if the set is not be used for a long time.
six
Power Supply
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:TO REDU CE THE RISK OF ELECTRIC SHOCK,DO NOT
REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1. DO NOT place objects on top of the
device, as objects may scratch the
device.
2. DO NOT expose the device to dirty
or dusty environments.
3. DO NOT place the device on an
uneven or unstable surface.
4. DO NOT insert any foreign objects
into the device.
5. DO NOT expose the device to strong
magnetic or electrical field.
6. DO NOT expose the device to direct
sunlight as it can damage the device.
Keep it away from heat sources.
7. DO NOT store your device in
temperatures higher than 40°C(104°F).
The internal operating temperature for
this device is from 20°C(68°F) to
60°C(140°F).
8. DO NOT use the device in the rain.
9. Please check with your Local
Authority or retailer for proper
disposal of electronic products.
10. The device and adaptor may product
some heat during normal operation of
charging. To prevent discomfort or injury
from heat exposure, DO NOT leave the
device on your lap.
11. POWER INPUT RATING:
Refer to the rating label on the device and
be sure that the power adaptor complies
with the rating. Only use accessories
specified by the manufacturer.
12. Clean the device with a soft cloth. If
needed, dampen the cloth slightly before
cleaning. Never use abrasives or cleaning
solutions.
13. Always power off the device to install
or remove external devices that do not
support hot-plug.
14.Disconnect the device from an electrical
outlet and power off before cleaning the
device.
15. DO NOT disassemble the device. Only a
certified service technician should perform
repair.
16. The device has apertures to disperse heat.
DO NOT block the device ventilation, the
device may become hot and malfunction as a
result.
17. Risk of explosion if battery replaced by an
incorrect type. Dispose of used batteries
according to the instruction.
18. PLUGGABLE EQUIPMENT: the socket-outlet
shall be installed near the equipment and shall
be easily accessible.

Specyfikacje produktu

Marka: Sunstech
Kategoria: CD-spelers/recorder
Model: CRUD386i

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sunstech CRUD386i, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje CD-spelers/recorder Sunstech

Sunstech

Sunstech CXUM52 Instrukcja

30 Września 2024
Sunstech

Sunstech CRUM385 Instrukcja

30 Września 2024
Sunstech

Sunstech CDP10 Instrukcja

30 Września 2024
Sunstech

Sunstech CXUM51 Instrukcja

30 Września 2024
Sunstech

Sunstech CRUD386i Instrukcja

30 Września 2024

Instrukcje CD-spelers/recorder

Najnowsze instrukcje dla CD-spelers/recorder

Mpman

Mpman CSD-60I Instrukcja

22 Września 2024
Lexibook

Lexibook RCD102IA Instrukcja

21 Września 2024
Marquant

Marquant MDM-19 Instrukcja

21 Września 2024
Mpman

Mpman CSD-21 Instrukcja

21 Września 2024
Mpman

Mpman CSU484PLL Instrukcja

20 Września 2024
Marquant

Marquant MDM-12 Instrukcja

19 Września 2024
Marquant

Marquant MDM-22 Instrukcja

19 Września 2024
Marquant

Marquant MDM-21 Instrukcja

19 Września 2024
Marquant

Marquant MDM-10 Instrukcja

19 Września 2024
Lexibook

Lexibook RCD150FE Instrukcja

18 Września 2024