Instrukcja obsługi Sunix UTS1009GC


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sunix UTS1009GC (1 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Microsoft Windows
In order to ensure proper operation of your USB to serial adapter, please follow the instructions below:
(1) Please go to SUNIX website for latest driver download.
(2) Click the Setup.exe from your driver.
(3) Follow the onscreen installation step.
(4)
After finishing installation, please connect the USB Serial Adapter to your PC.
(5) Please check to see if each is installed properly in Device Manager.
Start > Controller Panel > System > Device Manager
Apple macOS
Please download the driver for macOS, which includes driver and installation guide.
• Expands one independent RS-232 serial port through USB interface.
• Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
• No IRQ, DMA, I/O address resource required.
• Supports USB2.0 and USB1.1 compatible.
• Serial port provides transmission rate up to 115.2Kbps.
• Built-in ± 15KV ESD protection for all serial signals.
• Compact Size and low power consumption.
• Supports USB bus power without additional external power.
• Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
• Support Microsoft Windows and Linux.
Features
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into
asynchronous RS-232 serial ports for communication with serial devices. The UTS
adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial port
with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to
bring the advantages of data accessibility and mobile solution for kinds of commercial
and industrial automation applications.
Introduction
Please check if the following items are present and in good condition upon opening
package. Contact your vendor if any item is damaged or missing.
- USB to RS-232 Adapter, Cable 120 cm (4 ft)
Package Checklist
Pin Assignment
COM port pin assignments for USB to Serial Adapter
PIN
RS-232
DCD RxD TxD DTR GND DSR RTS CTS
1 2 3 4 5 6 7 8 9
RI
DB9M:
6
1 5
9
(1) Right click your mouse on the COM port, and select � .Properties
(2) Select �Port Setting� page to modify COM port setting.
(3) Select �Advanced� icon, you can modify COM port number and FIFO.
(4) When serial device requires setting to a specific COM number,
comfirm the port number match the
seetings required for your serial device.
After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.
Q 1. The USB to Serial Adapter will NOT communicate with my serial device.
Ans: It may cause by following issue:
a. Please verify that the USB to Serial Adapter is installed correctly.
b. Confirm that the port settings match the settings required for your serial device.
c. If the serial device requires software, make sure it’s installed properly.
d. Make sure the number of ports is matching the number of USB to Serial Adapter COM port.
e. USB to Serial Adapter does NOT suppor t serial mouse.
f. Please download the latest driver to support your new serial product.
Q 2. Why the COM port number will be different?
Ans: The COM port number is assigned by which USB slot is used to connect to the computer.
If changing USB slot, the por t number will change. Please keep installing USB adapter in the same USB slot.
Specification
USB Communication
Interface Universal Serial Bus (USB)
Receptacle USB Type-A with cable
Controller Prolific PL2303GC
Performance
USB 1.1 full speed 12Mbps
USB 2.0/3.0/3.1 compatible.
Serial Communication
Interface RS-232
Power
Input USB Bus-power 5VDC
Regulatory Approvals
Software
Microsoft WHQL certication
Driver Communication
Windows Client
Windows Server
Windows Embedded
Linux
Mac
7 / 8.x / 10 (X86/X64)
2008R2 / 2012/2016(X64)
Windows Embedded CE, Windows CE
Linux 2.6.x or later
MAC OS X
Operating Environment
Temperature
Humidity
0 to 60 °C ( 32 to 140 °F )
5% to 95% RH
Storage Environment
Temperature -20 to 85 °C ( -4 to 185 °F )
Baud rate 75bps ~ 115.2Kbps
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
FIFO 16 byte Hardware
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control
None, Xon/Xoff, RTS/CTS
Receptacle D-Sub 9-pin Male
No. of Port
1, 2, or 4-por t (Product Dependent)
1-port: USB to 1-port RS-232 Model
2-port: USB to 2-port RS-232 Model
4-port: USB to 4-por t RS-232 Model
Protection
±15KV
ESD protection for each signal Human Body Model
±15KV IEC1000-4-2 Air Gap Discharge
±8KV ESD IEC61000-4-2 Contact Discharge
Consumption
Model
1-port: < 0.7W = 5Vx130mA
2-port: < 1.3W = 5Vx250mA
4-port: < 2.5W = 5Vx500mA
Hardware
EUR: CE, US: FCC, Japan: VCCI,
TAIWAN: BSMI
Driver Installation/Verify
Port Setting
After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.
Troubleshooting
Setup.exe
Copyright©2021 SUNIX Co., Ltd. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, photocopying, manual, or otherwise, without prior written permission from SUNIX Co., Ltd.
Disclaimer - SUNIX Co., Ltd. shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment. SUNIX Co., Ltd. makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability;
however, no guarantee is given as to the correctness of this content. In the interest of continued product improvement, this company reserves the right to revise the manual or include amendments in the specifications of the product described within it at any time without notice and without obligation to notify
any person of such revision or changes. The information contained in this manual is provided for general use by the customers. Trademarks - SUNIX is a registered trademark of SUNIX Co., Ltd. Other registered marks used herein are for identification purposes only and may be trademarks of their respective
owners. BSMI 聲明 - 用物質含有情況標示資訊網站請參考下列https://www.sunix.com.tw 操作說頁面之產品/型號/文件下載區(RoHS文件)
E-mail for technical suppor t: info@sunix.com
Product information: www.sunix.com
Tel: +886-2-8913-1987
Fax: +886-2-8913-1986
Made in China 771-UTSX009GC-S01
(The number of COM ports will depend on what products you bought)
Prolic PL2303GC USB Serial COM Port (COM14)
Prolific PL2303GC USB Serial COM Port
(2) Please select � �.Driver
(3) Please select � � in the Driver setting.Uninstall
(4) SelectDelete the driver software for this device� to finish the uninstallation.
(1) You can go to the Device Manager and right click your mouse on the COM port, and select � .Properties
After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.
Uninstalling Driver
Update driver
Disable device
Uninstall device
Scan for hardware changes
Properties
USB to RS-232 Serial Adapter
UTS-GC series
User Manual Ver.1
Linux
(1) Please go to SUNIX website for latest driver download.
(2) Please find the nearest Linux kernel version first.
(3) make all // make a new driver.
(4) sudo rmmod pl2303.ko // remove driver
(5) sudo insmod pl2303.ko // add_1 a new driver
(6) sudo cp pl2303.ko /lib/modules/$(uname r)/kernel/drivers/usb/serial // add_2 a new driver
For latest manual and driver update:
Please visit by searching "UTS, GChttps://www.sunix.com ".


Specyfikacje produktu

Marka: Sunix
Kategoria: Kable do komputerów PC i urządzeń peryferyjnych
Model: UTS1009GC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sunix UTS1009GC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kable do komputerów PC i urządzeń peryferyjnych Sunix

Sunix

Sunix UTS1009DF Instrukcja

7 Października 2024
Sunix

Sunix VGA2785 Instrukcja

18 Września 2024
Sunix

Sunix UTS1009GC Instrukcja

18 Września 2024

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych

Goobay

Goobay 68874 Instrukcja

9 Października 2024
Goobay

Goobay 61259 Instrukcja

9 Października 2024
Kogan

Kogan KAHBCSPLT4A Instrukcja

9 Października 2024
StarTech.com

StarTech.com USBAUB1MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com USBAUB3MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com USBAUB2MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com CRJ4550PK Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST8CU824 Instrukcja

9 Października 2024