Instrukcja obsługi Sungrow SSS1600S

Sungrow Niesklasyfikowane SSS1600S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sungrow SSS1600S (26 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/26
S450_800_1600S-QIMUL-Ver12-202406
WWW.SUNGROWPOWER.COM
S450S / S800S / S1600S
Quick Installation Guide
Single-Phase Microinverter
The inverter has been designed and tested strictly according to international safety regulations. Read all
safety instructions carefully prior to any work and observe them at all times when working on or with the
inverter. Incorrect operation or work may cause:
Please follow the safety instructions related to the PV strings and the utility grid.
injury or death to the operator or a third party;
damage to the inverter or other properties.
.
.
1. Contents may be periodically updated or revised due to product development. The information in this guide
is subject to change without notice. In no case shall this guide substitute for the user manual or related
notes on the device.
6. Any violation could result in personal death or injury or device damage, and will void the warranty.
2. Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and
other related regulations before installing the equipment. The user manual can be downloaded by visiting
the website at http://support.sungrowpower.com/; or it can be obtained by scanning the QR code on the
front of the microinverter or the back cover of this guide.
5. The cable used must be intact and well insulated. Operation personnel must wear proper personal
protective equipment (PPE) all the time.
4. Before installation, check that the package contents are intact and complete compared to the packing list.
Contact SUNGROW or the distributor in case of any damaged or missing components.
3. All operations can be performed only by qualified personnel, that must be trained for installation and
commissioning of electrical system, as well as dealing with hazards, have knowledge of the manual and of
the local regulations and directives.
Safety
EN
7. Incorporates product approved by Anatel under number 23376-23-11568.
To learn more about the product network security vulnerability response process and vulnerability disclosure,
please scan the QR code below or visit the following website:
https://en.sungrowpower.com/security-vulnerability-management
Security Declaration
1
PV strings will produce electrical power when exposed to sunlight and can cause a lethal voltage and an
electric shock.
Only qualified personnel can perform the wiring of the PV panels.
Lethal voltage!
DANGER
All electrical connections must be in accordance with local and national standards.
Only with the permission of the local utility grid company, the inverter can be connected to the utility grid.
Risk of inverter damage or personal injury
Do not pull out the PV connectors and AC connector when the inverter is running. Disconnect the AC
circuit breaker . Wait 10 minutes for the internal capacitors to discharge. Verify that there is no voltage or
current before pulling any connector.
WARNING
All the warning labels and nameplate on the inverter body:
must be clearly visible;
must not be removed, covered or pasted.
WARNING
Risk of burns due to hot components!
Do not touch any hot parts (such as the heat sink) during operation.
CAUTION
Only qualified personnel can perform the country setting. Unauthorized alteration may cause:
A breach of the type-certificate marking.
Risk of inverter damage due to electrostatic discharge (ESD)!
By touching the electronic components, you may damage the inverter. For inverter handling, be sure to:
avoid any unnecessary touching.
wear a grounding wristband before touching any connectors.
NOTICE
Do not open the enclosure at any time. Unauthorized opening will void warranty and warranty claims and
in most cases terminate the operating license.
When the enclosure lid is removed, live components can be touched which can result in death or serious
injury due to electric shock.
Only operate the inverter when it is technically faultless and in a safe state.
Operating a damaged inverter can lead to hazardous situations that can result in death or serious
injuries due to electric shock.
Lethal danger from electric shock due to possibly damaged inverter
2

Specyfikacje produktu

Marka: Sungrow
Kategoria: Niesklasyfikowane
Model: SSS1600S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sungrow SSS1600S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Sungrow

Sungrow

Sungrow SSS1600S Instrukcja

7 Października 2024
Sungrow

Sungrow S2000S-SA Instrukcja

7 Października 2024
Sungrow

Sungrow S800S Instrukcja

7 Października 2024
Sungrow

Sungrow SG4400UD-20 Instrukcja

30 Września 2024
Sungrow

Sungrow SG4400UD-MV-20 Instrukcja

30 Września 2024
Sungrow

Sungrow SG4400UD-MV Instrukcja

30 Września 2024
Sungrow

Sungrow SG4400UD Instrukcja

30 Września 2024
Sungrow

Sungrow SG350HX-US Instrukcja

30 Września 2024
Sungrow

Sungrow SH10RT Instrukcja

30 Września 2024
Sungrow

Sungrow SG3300UD Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024