Instrukcja obsługi Sungrow SH6.0RS

Sungrow panel słoneczny SH6.0RS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sungrow SH6.0RS (43 stron) w kategorii panel słoneczny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/43
SH3.0_3.6_4.0_5.0_6.0RS-QIMUL-Ver19-202312WWW.SUNGROWPOWER.COM
SH3.0RS / SH3.6RS / SH4.0RS
SH5.0RS / SH6.0RS
Quick Installation Guide
1-Phase Hybrid Inverter
1
The inverter has been designed and tested strictly according to international safety regulations. Read all
safety instructions carefully prior to any work and observe them at all times when working on or with the
inverter. Incorrect operation or work may cause:
Please follow the safety instructions related to the PV strings and the utility grid.
The warning label on the inverter body are as follows.
injury or death to the operator or a third party;
damage to the inverter or other properties.
.
.
1. Contents may be periodically updated or revised due to product development. The information in this guide
is subject to change without notice. In no case shall this guide substitute for the user manual or related
notes on the device.
6. Any violation could result in personal death or injury or device damage, and will void the warranty.
2. Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and
other related regulations before installing the equipment. The user manual can be downloaded by visiting
the website at http://support.sungrowpower.com/; or it can be obtained by scanning the QR code on the
side of the equipment or the back cover of this guide.
5. The cable used must be intact and well insulated. Operation personnel must wear proper personal
protective equipment (PPE) all the time.
4. Before installation, check that the package contents are intact and complete compared to the packing list.
Contact SUNGROW or the distributor in case of any damaged or missing components.
3. All operations can be performed only by qualified personnel, that must be trained for installation and
commissioning of electrical system, as well as dealing with hazards, have knowledge of the manual and of
the local regulations and directives.
PV strings will produce electrical power when exposed to sunlight and can cause a lethal voltage and an
electric shock.
Only qualified personnel can perform the wiring of the PV panels.
Lethal voltage!
DANGER
All electrical connections must be in accordance with local and national standards.
Only with the permission of the local utility grid company, the inverter can be connected to the utility grid.
Danger to life from electric shock due to lethal voltage!
NOTICE
Disconnect the inverter from all the external power sources before maintenance!
Do not touch live parts for 10 minutes after disconnection from the power sources.
Burn danger due to hot surface that may exceed 60 .
°C
Safety
Inverter
EN
2
Danger to life due to high voltages!
Only qualified personnel can open and maintain the inverter.
Risk of inverter damage or personal injury
Do not pull out the PV connectors and AC connector when the inverter is running. Disconnect the AC
circuit breaker and set the DC load-break switch of the inverter to OFF. Wait 10 minutes for the internal
capacitors to discharge. Verify that there is no voltage or current before pulling any connector.
WARNING
All the warning labels and nameplate on the inverter body:
must be clearly visible; and
must not be removed, covered or pasted.
WARNING
Risk of burns due to hot components!
Do not touch any hot parts (such as the heat sink) during operation. Only the DC switch can safely be
touched at any time.
CAUTION
Only qualified personnel can perform the country setting. Unauthorized alteration may cause:
A breach of the type-certificate marking.
Risk of inverter damage due to electrostatic discharge (ESD)!
By touching the electronic components, you may damage the inverter. For inverter handling, be sure to:
avoid any unnecessary touching; and
wear a grounding wristband before touching any connectors.
NOTICE
Do not open the enclosure at any time. Unauthorized opening will void warranty and warranty claims and
in most cases terminate the operating license.
When the enclosure lid is removed, live components can be touched which can result in death or serious
injury due to electric shock.
Danger to life from electric shocks due to live voltage
Only operate the inverter when it is technically faultless and in a safe state.
Operating a damaged inverter can lead to hazardous situations that can result in death or serious
injuries due to electric shock.
Lethal danger from electric shock due to possibly damaged inverter
DANGER
Read the user manual before maintenance!

Specyfikacje produktu

Marka: Sungrow
Kategoria: panel słoneczny
Model: SH6.0RS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sungrow SH6.0RS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje panel słoneczny Sungrow

Sungrow

Sungrow SH6.0RS Instrukcja

5 Maja 2024

Instrukcje panel słoneczny

Najnowsze instrukcje dla panel słoneczny

Reolink

Reolink Solar Panel 2 Instrukcja

27 Marca 2025
Energenie

Energenie SK-400-01 Instrukcja

11 Marca 2025
Sharp

Sharp NB-JG440B Instrukcja

5 Stycznia 2025
Sharp

Sharp NU-JC415 Instrukcja

5 Stycznia 2025
Sharp

Sharp NB-JD585 Instrukcja

5 Stycznia 2025
Sharp

Sharp NB-JG445R Instrukcja

5 Stycznia 2025
Sharp

Sharp NB-JE610 Instrukcja

5 Stycznia 2025
Sharp

Sharp NU-JC420B Instrukcja

5 Stycznia 2025
Sharp

Sharp NB-JG435B Instrukcja

5 Stycznia 2025
Sharp

Sharp NB-JD575 Instrukcja

5 Stycznia 2025