Instrukcja obsługi Sun Joe SWJ802E-PRP

Sun Joe Maszyna do piłowania SWJ802E-PRP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe SWJ802E-PRP (20 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Let Gravity Do The Work®

A Division of Snow Joe

®, LLC Model SWJ802E Form No. SJ-SWJ802E-880E-MR9

OPERATOR’S MANUAL

ELECTRIC POLE CHAIN SAW

8-INCH | 6.5-AMP | MULTI-ANGLE HEAD

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Do not use in dangerous environments – Do not use

power tools in damp or wet locations.

5. Do not use the pole chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footware, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out miscoscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

15. Disconnect tool – Disconnect the pole chain saw from

the power supply when not in use, before servicing,

when transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running –

Turn the power OFF by removing the power cord directly

from its socket. Do not leave the saw until the cutting bar

comes to a complete stop.

20. Avoid unintentional starting – Do not carry the pole

chain saw with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22.

Stay alert – Watch what you are doing. Use common sense.

Do not operate the pole chain saw when you are tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

the pole chain saw. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

3. To reduce the risk of electric shock, this appliance has

a polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized UL-, CSA- or

ETL-rated extension cord for outdoor, all-weather use.

The appliance plug will t into a polarized extension

cord only one way.

If the appliance plug does not t fully into the extension

cord, reverse the plug. If the plug still does not t, obtain

a correct polarized extension cord. A polarized extension

cord will require the use of a polarized wall outlet.

The extension cord plug will t into the polarized wall

outlet only one way. If the plug does not t fully into the

wall outlet, reverse the plug. If the plug still does not t,

contact a qualied electrician to install the proper wall

outlet. Do not modify the appliance plug, extension cord

receptacle or extension cord plug in any way.

4. To prevent the appliance cord from disconnecting from the

extension cord during operation, make a knot with the two

cords as shown in Table 1.

5. Do not abuse the cord. Never pull the pole chain saw

by the cord or yank the cord to disconnect it from the

receptacle. Keep the cord away from heat, oil, and

sharp edges.

Specic Safety Rules For

Pole Chain Saws

mWARNING! To protect yourself SHOCK HAZARD! –

from electrocution, do not operate the pole chain saw within

50 ft (15 m) of overhead wires. Failure to follow this instruction

could result in severe personal injury.

Operating Tips For Pole Chain Saws

• Stay alert. Use common sense while operating the unit.

• Keep work area clean and well-lit. Cluttered areas invite

accidents.

• Note the extension cord's location relative to the tool.

While operating the pole chain saw, be careful not to trip

over the cord.

• Keep the cord away from the chain and the operator at

all times.

• Keep children, animals, and bystanders a safe distance

away from the pole chain saw and extension cord.

• Only the pole chain saw operator should be in the

work area.

• Do not use the pole chain saw to cut down trees.

• Always use two hands when operating the pole chain saw.

Grip the pole chain saw securely with one hand on the

trigger, the other hand on the pole.

• Before starting the pole chain saw, make sure that the saw

chain is not in contact with any object.

• Do not allow the pole chain saw to make contact with

grounded objects such as pipes, fences, and metal posts.

• Keep all parts of the body away from the saw chain while

operating the pole chain saw.

m WARNING! m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the electric pole chain saw

to make contact with water while it is in operation. If

the appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA-, or ETL-rated extension cord

for outdoor, all-weather use.

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

Cord Length:

Min. Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

(B) Connect plug and receptacle

Cord set Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

• Do not force the pole chain saw while cutting. Apply light

pressure. It will perform more eectively and safely if it is

used at the rate for which it was designed.

• Use extreme caution when cutting a limb that is under

tension. When wood tension is released, the limb could

spring back and strike the operator, causing severe injury

or death.

• Do not carry a plugged-in unit. Carry the pole chain saw

from one place to another with the unit unplugged. During

transport, hold the pole at its balance point (close to the

saw end), with the guide bar and chain facing to the rear.

• Do not cut small brush and saplings with the pole chain

saw. Small branches may catch in the chain and be

whipped towards the operator, which could pull the

operator o balance.

Kickback

mWARNING! Kickback may occur when the nose or tip of

the guide bar touches an object, or when the wood closes in

and pinches the saw chain in the cut.

AVOID CONTACTING THE GUIDE BAR TIP WITH ANY

OBJECT. In some cases, when the tip makes contact with an

object, it may cause a fast reverse reaction, kicking the guide

bar up and back towards the operator. Pinching the saw chain

along the top of the guide bar may also push the guide bar

rapidly back towards the operator. Either of these reactions

may cause you to lose control of the pole chain saw, which

could result in serious personal injury.

• Kickback safety devices on this pole chain saw include

a skip chain and a low kickback guide bar. These will

reduce, but not entirely prevent, kickbacks. Follow the

necessary precautions indicated in this operator's manual

to avoid kickbacks.

• Always use two hands when operating the pole chain saw,

one hand gripping the trigger and the other hand gripping

the pole. Use a rm grip. Thumbs and ngers must wrap

around the trigger and the pole.

• Keep all guards in place on the pole chain saw. Make sure

they are in proper working order.

• Do not overreach or extend arms above shoulder height.

• Keep solid footing and balance at all times.

• Never try cutting through two branches at the same time.

Only cut one at a time.

• Do not bury the guide bar nose or try to cut by boring the

guide bar nose into the wood.

• Watch for shifting of wood or other forces that may pinch

the chain.

• Use extreme caution when re-entering a previous cut.

• Use the low-kickback chain and guide bar supplied with

this pole chain saw. Only use genuine Snow Joe® +

Sun Joe® replacement parts designed specically for use

with this pole chain saw.

• Never use a dull or loose chain. Keep the chain sharp with

proper tension.

Pole Chain Saw Trimming Precautions

• Never stand directly under the limb you are trimming.

Always position yourself outside the path of falling debris.

• Never stand on a ladder or other type of unstable support

while using the pole chain saw.

• Keep all handles and grip surfaces clean, dry, and free

from oil and grease.

• Always use both hands to operate the pole chain saw.

Keep a rm, steady pressure on the pole chain saw while

cutting, but do not try to cut limbs larger in diameter than

the length of the guide bar.

• Keep other people and pets away from the cutting end of

the pole chain saw and at a safe distance away from the

work area.

• Do not use the pole chain saw near cable, electric power,

or telephone lines. Maintain a minimum clearance of

50 ft (15 m) from all power lines.

Specyfikacje produktu

Marka:	Sun Joe
Kategoria:	Maszyna do piłowania
Model:	SWJ802E-PRP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe SWJ802E-PRP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Sun Joe

Sun Joe SWJ802E-PRP Instrukcja

30 Grudnia 2025

Sun Joe 20VIONLTE-CS10-RM Instrukcja

30 Grudnia 2025

Sun Joe iON8PS2 Instrukcja

24 Września 2024

Sun Joe 24V-HCSWP-CT Instrukcja

20 Września 2024

Sun Joe 24V-CSSHRP-LTE-RM Instrukcja

16 Września 2024

Sun Joe SWJ803E Instrukcja

15 Września 2024

Sun Joe SWJ805E-RM Instrukcja

14 Września 2024

Sun Joe SWJ699E-RED-RM Instrukcja

5 Września 2024

Sun Joe 24V-PS10-CT Instrukcja

4 Września 2024

Sun Joe SWJ699E-RM Instrukcja

4 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Bosch GST 18V-95 B Professional Instrukcja

3 Stycznia 2025

DeWalt DCCS621 Instrukcja

3 Stycznia 2025

DeWalt DCPS671 Instrukcja

3 Stycznia 2025

DeWalt DCS590 Instrukcja

3 Stycznia 2025

MSW -TSAW2000EXT Instrukcja

31 Grudnia 2025

Trotec PJSS 10-20V Instrukcja

30 Grudnia 2025

Stihl MS 201 TC-M Instrukcja

30 Grudnia 2025

Black Decker 3157 Instrukcja

30 Grudnia 2025

Silverline 624327 Instrukcja

30 Grudnia 2025

Bavaria BEC 1835 Instrukcja

30 Grudnia 2025