Instrukcja obsługi Sun Joe SJH904E-RM

Sun Joe nożyce do żywopłotu SJH904E-RM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe SJH904E-RM (16 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®, LLC Model SJH904E-RM Form No. SJ-SJH904E-RM-880E-M-V1
R
OPERATOR’S MANUAL
ELECTRIC POLE + HEDGE TRIMMER
19-INCH | 4.5-AMP | MULTI-ANGLE HEAD
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
2
A Division of Snow Joe
®, LLC Model SJH904E-RM Form No. SJ-SJH904E-RM-880E-M-V1
R
OPERATOR’S MANUAL
ELECTRIC POLE + HEDGE TRIMMER
19-INCH | 4.5-AMP | MULTI-ANGLE HEAD
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this power tool must read,
understand, and follow these instructions in their entirety.
Failure to follow these instructions may result in ELECTRIC
SHOCK, FIRE PERSONAL INJURY. , and/or serious
Notice the personal safety alert symbol used in this m
manual to draw your attention to a given along WARNING
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Before using the power tool, familiarize yourself with the
controls, especially how to stop the power tool in an
emergency. The only individuals who should use the power
tool are those who thoroughly understand these instructions
and know how to properly operate the unit. Children should
never be allowed access to the power tool.
Retain this manual for future reference and reread it at the start
of each trimming season.
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cords immediately.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls. Ensure
the controls (start/stop) function properly before using.
5. Use the right tool – Do not use this power tool for any job
except that for which it was intended.
6. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
7. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
8. Avoid accidental starting – Do not carry the power tool
with your nger on the switch. Make sure the switch is o
before plugging in or unplugging the unit.
mCAUTION! Moving parts will continue to run for several
seconds after turning o the machine.
9. Do not abuse the cord – Never carry the power tool
by the cord or yank the cord to disconnect it from the
receptacle. Keep the cord away from heat, oil, and sharp
edges.
10. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at
all times.
13. Use safety glasses – Also use safety footwear, snug-
tting clothing, protective gloves, hearing, and head
protection.
14. Disconnect the tool – Disconnect the power tool from
the power supply when it is not in use, before servicing
it, when changing accessories, and when performing any
other maintenance task.
15. Store idle tool indoors – When not in use, the power tool
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
16. Maintain the power tool with care – Keep the cutting
edges sharp and clean for optimal performance and
to reduce the risk of injury. Inspect the extension cord
periodically and immediately replace it if damaged. Keep
the handles dry, clean, and free from oil and grease.
Follow the additional recommendations described in the
maintenance section of this manual.
3
17. Avoid dangerous environments – Do not use the power
tool in rain or in damp or wet locations. Do not operate
the power tool in gaseous or explosive atmospheres or
use the power tool near ammable or combustible liquids.
Motors in these tools normally spark, and the sparks
might ignite fumes.
18. Stay alert – Watch what you are doing. Use common
sense. Do not operate the power tool when you are
tired or under the inuence of drugs, alcohol, or other
medication.
19. Check for damaged parts – Before further use of the
power tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may aect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Contact the Snow Joe® + Sun Joe® customer service
center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Specic Safety Warnings for Hedge
Trimmer/Pole Hedge Trimmer
1. Remove any adjusting key or wrench before turning the
power tool on. A wrench or key left attached to the rotating
part of the power tool may result in personal injury.
2. If devices or facilities are available for the extraction and
collection of dust, ensure these are connected or properly
used. Use of these devices can reduce dust related
hazards.
3. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
4. Hold the pole hedge trimmer by insulated gripping
surfaces only, because the cutter blade may contact
hidden wiring or its own cord. Cutter blades contacting a
"live" wire may electrify exposed metal parts of the power
tool and could give the operator an electric shock.
5. Maintain a rm grip on both handles while cutting with the
blade. Keep the blade away from body.
6. Hold pole hedge trimmer properly, e.g., with both hands
if two handles are provided. Loss of control can cause
personal injury.
7. Keep extension cord away from cutting area. During
operation the extension cord may be hidden in shrubs and
can be accidentally cut by the blade.
8. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
9. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material. A moment of inattention while
operating the pole hedge trimmer may result in serious
personal injury.
10. Carry the hedge trimmer by the handle with the cutting
blade stopped. When transporting or storing the hedge
trimmer always keep the blade covered. Proper handling
of the hedge trimmer will reduce possible personal injury
from the cutter blades.
11. Do not use the hedge trimmer if the switch does not turn it
on and o. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
12. Use the pole hedge trimmer and accessories in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations dierent from intended
use could lead to a hazardous situation.
13. The product should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
Electric Safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for
this power tool. Receptacles are available having built-in
GFCI protection and may be used for this measure
of safety.
2. To reduce the risk of electric shock, this appliance has
a polarized plug (i.e. one blade is wider than the other).
Use this appliance only with a polarized UL-, CSA-, or
ETL-listed extension cord recommended for outdoor,
all-weather use.
The appliance plug will t into a polarized extension cord
only one way. If the appliance plug does not t fully into the
extension cord, reverse the plug. If the plug still does not
t, obtain a correct polarized extension cord. A polarized
extension cord will require the use of a polarized wall outlet.
The extension cord plug will t into the polarized wall outlet
only one way. If the plug does not t fully into the wall
outlet, reverse the plug. If the plug still does not t, contact
a qualied electrician to install the proper wall outlet. Do not
modify the appliance plug, extension cord receptacle, or
extension cord plug in any way.
3. To prevent electric shock, use only with an extension cord
suitable for outdoor use, such as SW-A, SOW-A, STW-A,
STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current product. An
undersized cord will cause a drop in line voltage resulting
in loss of power and overheating.

Specyfikacje produktu

Marka: Sun Joe
Kategoria: nożyce do żywopłotu
Model: SJH904E-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe SJH904E-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Sun Joe

Sun Joe

Sun Joe SJH904E-RM Instrukcja

14 Września 2024
Sun Joe

Sun Joe 20VIONLT-PHT17-RM Instrukcja

12 Września 2024
Sun Joe

Sun Joe 24V-HT22-LTE Instrukcja

9 Września 2024
Sun Joe

Sun Joe 20VIONLTE-HT20-RM Instrukcja

28 Sierpnia 2024
Sun Joe

Sun Joe HJ604C Instrukcja

19 Sierpnia 2024
Sun Joe

Sun Joe 24V-PHT17-LTE Instrukcja

5 Lipca 2024
Sun Joe

Sun Joe 24V-X2-24HT-CT Instrukcja

4 Lipca 2024
Sun Joe

Sun Joe HJ604C-PRP-RM Instrukcja

3 Lipca 2024
Sun Joe

Sun Joe 24V-HT22-CT-RM Instrukcja

2 Lipca 2024
Sun Joe

Sun Joe HJ604C-RED Instrukcja

2 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024
Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024
Dolmar

Dolmar HT-2460 Instrukcja

9 Października 2024