Instrukcja obsługi Sun Joe HJ604C-PRP-RM
Sun Joe
nożyce do żywopłotu
HJ604C-PRP-RM
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe HJ604C-PRP-RM (15 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/15
THANKS FOR YOUR PURCHASE
OF A REMANUFACTURED PRODUCT.
snowjoe.com
To make sure you get the most out of
your
product, be sure to register online at
to enjoy full product support.
PASTE UPC LABEL HERE
A Division of Snow Joe
® , LLC Model HJ604C-RM Form No. SJ-HJ604C-RM-880E-V1
R
OPERATOR’S MANUAL
CORDLESS GRASS
SHEAR + HEDGE TRIMMER
7.2-VOLT | LITHIUM-ION
© 2017 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
® , LLC Model HJ604C-RM Form No. SJ-HJ604C-RM-880E-V1
R
OPERATOR’S MANUAL
CORDLESS GRASS
SHEAR + HEDGE TRIMMER
7.2-VOLT | LITHIUM-ION
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
Notice the personal safety alert symbol used in this manual m
to draw your attention to a WARNING given along with the
particular operating instruction. This means that the operation
requires special ATTENTION CAUTION AWARENESS, , and .
When using this power tool, basic safety precautions, including
the following, should always be followed to reduce the risk of
re, electric shock, personal injury and material damage.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Retain this manual for future reference and reread it at the start
of each trimming season.
mWARNING! This battery-operated power tool must be
recharged only with the specic charging unit for the battery. A
charging unit that may be suitable for one type of battery may
create a risk of re when used with another battery type.
• Avoid accidental starting.
• When the tool is not in use, keep it away from other metal
objects.
• Before operating the tool, read the entire manual carefully
and make sure you know how to switch the tool OFF in an
emergency.
Work Area Safety
1. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep bystanders and children away. All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
Electrical Safety
1. If the battery charger cable is damaged, please call the
Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
2. If charging the power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected power supply. The using of an RCD reduces the
risk of electric shock.
3. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any earthed (grounded)
power tools or battery chargers. Unmodied plugs and
matching outlets will reduce risk of electric shock.
4. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
5. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
6. Do not abuse the charging cord. Never use the cord
for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
7. Battery charger is for indoor use only. Only charge this
battery-powered tool indoors.
Personal Safety
1. Stay alert. Watch what you are doing and use common
sense when operating a power tool. Do not use the
power tool while you are tired or under the inuence of
drugs, alcohol or medication. A moment of inattention
while operating power tool may result in serious personal
injury.
2. Use personal protective equipment. Always wear eye
protection. Protective equipment such as safety glasses,
a dusk mask, non-skid safety shoes, a hard hat, and
hearing protection, when used for appropriate conditions,
will reduce the possibility of personal injuries.
3. Avoid unintentional starting. Ensure the switch is in the
OFF position before connecting to the power source/
battery charger, or before picking up or carrying the tool.
Carrying power tools with your nger on the switch or
1
2
charging power tools with the switch ON can lead to
accidents.
4. Remove any adjusting key or wrench before starting
the power tool. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Dangling articles such as these can become caught in
moving parts. Using work gloves and substantial footwear
is recommended when working outdoors. Wear
a protective hair covering to contain long hair.
7. Use dust-reducing equipment (e.g. dust masks) when
available. Using these devices can greatly reduce
dust-related hazards.
Power Tool Use and Care
1. Do not force the appliance. It will do the job better with
less likelihood of injury if it is used at the rate for which it
was designed.
2. Do not use the power tool if the switch does not turn
it on and o. Any power tool that cannot be controlled by
the switch is dangerous and must be repaired.
3. Disconnect the battery pack from the power tool
before making any adjustments, changing accessories
or storing the power tool. Such preventative safety
measures reduce the risk of starting the power tool
accidentally.
4. Store idle appliances indoors. When not in use,
appliances should be stored indoors in a dry and high or
locked-up place out of the reach of children.
5. Maintain appliance with care. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may aect the power tool's operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6. Properly Keep cutting blades sharp and clean.
maintained cutting blades with sharp edges are less likely
to bind and are easier to control.
7. Use the power tool and accessories in accordance
with these instructions and in the manner intended
for the particular use of the power tool, taking into
account the working conditions and the work to be
performed. Using the power tool for operations dierent
from those intended could result in a hazardous situation.
8. Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material. A moment of inattention while
operating the product may result in serious personal injury.
9. Carry the product by the handle with the cutter blade
stopped. When transporting or storing the product always
t the cutting device cover. Proper handling of the product
will reduce possible personal injury from the cutter blades.
10. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden wiring.
Cutter blades contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
11. Check the hedge for foreign objects before operation,
e.g. wire fences. Take care that the cutting device does
not come into contact with wire or other metal objects.
12. Hold the product properly, e.g. with both hands if two
handles are provided. Loss of control can cause personal
injury.
Service
1. If your power tool requires service, contact an
authorized Snow Joe® + Sun Joe® dealer or call the
Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563). Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard. Contact
the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
Battery Safety Warnings
This manual contains important safety and operating
instructions for your battery and charger.
1. Before using the charging, thoroughly read all instructions
and cautionary markings on the charger, the telescoping
pole, and the cordless grass shear + hedge trimmer.
mWARNING! If the grass shear + hedge trimmer housing
is cracked or damaged, do not insert the charging adaptor into
the power tool or plug the power tool into the mains outlet.
There is a danger of electric shock or electrocution.
2. This charger is ONLY intended to charge this rechargeable
battery. Any other use poses a risk of re, electric shock
or electrocution.
3. Do not place any object on top of the charger or place
the charger on a soft surface that may result in excessive
internal heat. Keep the charger away from any heat
source.
4. To reduce the risk of damaging the electric plug and
cord, pull the plug, not the cord, when disconnecting the
charger from the electric outlet.
5. Make sure the battery charging cable is located in a safe
place so that it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
6. An extension cord should not be used unless absolutely
necessary. Using an improper extension cord poses a risk
of re, electric shock or electrocution.
Specyfikacje produktu
| Marka: | Sun Joe |
| Kategoria: | nożyce do żywopłotu |
| Model: | HJ604C-PRP-RM |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sun Joe HJ604C-PRP-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nożyce do żywopłotu Sun Joe
14 Września 2024
9 Września 2024
28 Sierpnia 2024
19 Sierpnia 2024
5 Lipca 2024
4 Lipca 2024
3 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
Instrukcje nożyce do żywopłotu
- nożyce do żywopłotu Worx
- nożyce do żywopłotu Honda
- nożyce do żywopłotu Stihl
- nożyce do żywopłotu Bosch
- nożyce do żywopłotu Cramer
- nożyce do żywopłotu Stiga
- nożyce do żywopłotu Kärcher
- nożyce do żywopłotu MacAllister
- nożyce do żywopłotu Stanley
- nożyce do żywopłotu Black & Decker
- nożyce do żywopłotu Scheppach
- nożyce do żywopłotu Grizzly
- nożyce do żywopłotu Gardena
- nożyce do żywopłotu DeWalt
- nożyce do żywopłotu Einhell
- nożyce do żywopłotu Remington
- nożyce do żywopłotu Hyundai
- nożyce do żywopłotu Husqvarna
- nożyce do żywopłotu Makita
- nożyce do żywopłotu Ozito
- nożyce do żywopłotu Fuxtec
- nożyce do żywopłotu RYOBI
- nożyce do żywopłotu Wolf Garten
- nożyce do żywopłotu Eurogarden
- nożyce do żywopłotu Handy
- nożyce do żywopłotu DEDRA
- nożyce do żywopłotu Garden Feelings
- nożyce do żywopłotu Baumr-AG
- nożyce do żywopłotu Sovereign
- nożyce do żywopłotu CMI
- nożyce do żywopłotu Sterwins
- nożyce do żywopłotu Meec Tools
- nożyce do żywopłotu AL-KO
- nożyce do żywopłotu Güde
- nożyce do żywopłotu Texas
- nożyce do żywopłotu ATIKA
- nożyce do żywopłotu Bavaria
- nożyce do żywopłotu Zipper
- nożyce do żywopłotu Flymo
- nożyce do żywopłotu Florabest
- nożyce do żywopłotu Hanseatic
- nożyce do żywopłotu Solo
- nożyce do żywopłotu Ferrex
- nożyce do żywopłotu Ergotools Pattfield
- nożyce do żywopłotu Ferm
- nożyce do żywopłotu Hitachi
- nożyce do żywopłotu Craftsman
- nożyce do żywopłotu Fieldmann
- nożyce do żywopłotu Homelite
- nożyce do żywopłotu Shindaiwa
- nożyce do żywopłotu Gardenline
- nożyce do żywopłotu PowerPlus
- nożyce do żywopłotu Vonroc
- nożyce do żywopłotu Spear & Jackson
- nożyce do żywopłotu HiKOKI
- nożyce do żywopłotu McCulloch
- nożyce do żywopłotu Metabo
- nożyce do żywopłotu Bestgreen
- nożyce do żywopłotu Hoberg
- nożyce do żywopłotu EGO
- nożyce do żywopłotu Skil
- nożyce do żywopłotu Cocraft
- nożyce do żywopłotu Greenworks
- nożyce do żywopłotu Yellow Garden Line
- nożyce do żywopłotu Challenge
- nożyce do żywopłotu Tel Sell
- nożyce do żywopłotu Tanaka
- nożyce do żywopłotu Troy-Bilt
- nożyce do żywopłotu Topcraft
- nożyce do żywopłotu Gamma
- nożyce do żywopłotu Kress
- nożyce do żywopłotu Dolmar
- nożyce do żywopłotu McGregor
- nożyce do żywopłotu Varo
- nożyce do żywopłotu Pattfield
- nożyce do żywopłotu Kibani
- nożyce do żywopłotu Echo
- nożyce do żywopłotu Maruyama
- nożyce do żywopłotu Grouw
- nożyce do żywopłotu Batavia
- nożyce do żywopłotu Gtech
- nożyce do żywopłotu Levita
- nożyce do żywopłotu Efco
- nożyce do żywopłotu Lux Tools
- nożyce do żywopłotu Verto
- nożyce do żywopłotu Anova
- nożyce do żywopłotu Hurricane
- nożyce do żywopłotu Budget
- nożyce do żywopłotu Deltafox
- nożyce do żywopłotu Palmera
- nożyce do żywopłotu Yardforce
- nożyce do żywopłotu Powerpeak
- nożyce do żywopłotu Toledo
- nożyce do żywopłotu Kaaz
- nożyce do żywopłotu Garden Groom
- nożyce do żywopłotu Mr Gardener
- nożyce do żywopłotu Kingcraft
- nożyce do żywopłotu Mac Allister
- nożyce do żywopłotu Jonsered
- nożyce do żywopłotu Robust
- nożyce do żywopłotu LawnMaster
- nożyce do żywopłotu G-Technology
- nożyce do żywopłotu Maxbear
Najnowsze instrukcje dla nożyce do żywopłotu
15 Października 2024
15 Października 2024
14 Października 2024
13 Października 2024
12 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024