Instrukcja obsługi Sun Joe 24V-MPSWVG-LTE-SJG

Sun Joe Maszyna do piłowania 24V-MPSWVG-LTE-SJG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 24V-MPSWVG-LTE-SJG (56 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/56

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-MPSWVG-LTE-SJG Form No. SJ-24V-MPSWVG-LTE-SJG-880E-M

RCORDLESS HANDHELD

RECIPROCATING SAW

24V MAX* | 2.0 Ah | 4 CUTTING BLADES

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings, instructions, illustrations and

specications provided with this power tool. Failure to

follow all instructions listed below may result in electric shock,

re and/or serious injury.

General Safety WARNINGS!

Notice the personal safety alert symbol used in this manual m

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION CAUTION AWARENESS, , and .

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The cutting blade can cut you. Keep hands

and feet away from the blade and the cutting area.

Retain this manual for future reference.

• Avoid accidental starting.

• When the tool is not in use, keep it away from other metal

objects.

• Before operating the tool, read the entire manual carefully

and make sure you know how to switch the tool OFF in an

emergency.

Work Area Safety

• Cluttered and dark Keep work area clean and well lit.

areas invite accidents.

• Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

or fumes.

• Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

Personal Safety

• Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal

injury.

• Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

• Prevent unintentional starting. Ensure the switch is in

the o-position before connecting to power source

and/or BATTERY pack, picking up or carrying the

tool. Carrying power tools with your nger on the switch

or energising power tools that have the switch on invites

accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

• Keep proper footing and balance at Do not overreach.

all times. This enables better control of the power tool in

unexpected situations.

• Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust-related hazards.

• Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool

safety principles. A careless action can cause severe

injury within a fraction of a second.

Power Tool Use and Care

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

• Do not use the power tool if the switch does not turn it

on and o. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

• R pack emove the battery from the power tool before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may aect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

Battery Tool Use And Care

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may create

a risk of injury and re.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behaviour resulting in re, explosion or risk

of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or temperature

above 245 °F (130 °C) may cause explosion.

• Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specied in the instructions. Charging improperly or at

temperatures outside the specied range may damage the

battery and increase the risk of re.

Service

• If your power tool requires service, contact an

authorized Snow Joe® + Sun Joe® dealer or call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563). Only identical

replacement parts should be utilized for repairs. This will

ensure that the safety of the power tool is maintained.

• If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard. Contact

the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Instructions for Reciprocating

Saws

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a ″live″ wire may make exposed

metal parts of the power tool ″live″ and could give the

operator an electric shock.

• Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding the

workpiece by hand or against your body leaves it unstable

and may lead to loss of control.

Battery & Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the power tool and cause it to

malfunction, which can lead to serious personal injury.

mWARNING! Do not use a battery pack or appliance that

is damaged or modied. Damaged or modied batteries may

exhibit unpredictable behavior resulting in re, explosion or risk

of injury.

Do not modify or attempt to repair the appliance or the battery

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualied repair person

using only identical replacement parts. This will ensure that the

safety of the battery pack is maintained.

mCAUTION! To reduce the risk of injury, charge the

Sun Joe® 24V lithium-ion battery pack only in its designated

Sun Joe® lithium-ion charger. Other types of chargers present

risk of re, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is 41°F –

105ºF (5°C – 40.5°C). Do not charge the battery outside in

freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull

the plug, not the cord, from the receptacle to reduce the

risk of damage to the electrical plug and cord. Never carry

the charger by its cord or yank it by the cord to disconnect

it from the receptacle. Keep the cord away from heat, oil

and sharp edges. Make sure the cord will not be stepped

on, tripped over or subjected to damage or stress when the

charger is in use. Do not use the charger with a damaged

cord or plug. Replace a damaged charger immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Charger (XZ2600-0450) is rated for 100 – 240 volt AC

only – The charger must be plugged into an appropriate

receptacle.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to

disconnect battery pack from unplugged charger.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery pack – Battery pack

may explode, causing personal injury or damage. Toxic

fumes and materials are created when battery packs are

burned.

• Do not crush, drop or damage battery pack – Do not use

the battery pack or charger if they have sustained a sharp

blow, been dropped, run over or have been damaged in any

way (i.e. pierced with a nail, hit with a hammer, stepped on,

etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

contact an authorized Snow Joe® + Sun Joe® dealer or

call the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Battery chemicals cause serious burns – Never let a

damaged battery pack contact the skin, eyes or mouth.

If a damaged battery pack leaks battery chemicals, use

rubber or neoprene gloves to safely dispose of it. If skin

is exposed to battery uids, wash the aected area with

soap and water and rinse with vinegar. If eyes are exposed

to battery chemicals, immediately ush with water for 20

minutes and seek medical attention. Remove and dispose

of contaminated clothing.

• Do not short circuit – When battery pack is not in use,

keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects

that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or

a re.

• Store your battery pack and charger in a cool, dry

place – Do not store the battery pack or charger where

temperatures may exceed 105ºF (40.5ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

Information about the battery

• The battery pack supplied with your cordless power tool is

only partially charged. The battery pack has to be charged

completely before you use the tool for the rst time.

• For optimum battery performance, avoid low discharge

cycles by charging the battery pack frequently.

• Store the battery pack in a cool place, ideally at 77°F

(25°C) and charged to at least 40%.

• Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when its capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your cordless

reciprocating saw, and therefore pose a safety risk.

• Do not throw the battery pack into an open re as this

poses a risk of explosion.

• Do not ignite the battery pack or expose it to re.

Specyfikacje produktu

Marka:	Sun Joe
Kategoria:	Maszyna do piłowania
Model:	24V-MPSWVG-LTE-SJG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe 24V-MPSWVG-LTE-SJG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025

Sun Joe 24V-CSSHRP-CT Instrukcja

7 Stycznia 2025

Sun Joe SWJ802E-PRP Instrukcja

30 Grudnia 2025

Sun Joe 20VIONLTE-CS10-RM Instrukcja

30 Grudnia 2025

Sun Joe iON8PS2 Instrukcja

24 Września 2024

Sun Joe 24V-HCSWP-CT Instrukcja

20 Września 2024

Sun Joe 24V-CSSHRP-LTE-RM Instrukcja

16 Września 2024

Sun Joe SWJ803E Instrukcja

15 Września 2024

Sun Joe SWJ805E-RM Instrukcja

14 Września 2024

Sun Joe SWJ699E-RED-RM Instrukcja

5 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025

Güde GSS 400 Instrukcja

12 Stycznia 2025

Makita DUC306PG2 Instrukcja

12 Stycznia 2025

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025

DEDRA DED7060 Instrukcja

11 Stycznia 2025

Einhell KGS 190 Instrukcja

11 Stycznia 2025

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025

Maruyama MCV51 Instrukcja

11 Stycznia 2025

Vonroc JS505DC Instrukcja

9 Stycznia 2025

PowerPlus POWX53300T Instrukcja

9 Stycznia 2025