Instrukcja obsługi Sun Joe 24V-GT10-LTE-RM

Sun Joe Podcinacz 24V-GT10-LTE-RM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 24V-GT10-LTE-RM (20 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
CORDLESS GRASS TRIMMER
24-VOLT MAX* | 2.0 Ah | 10 INCH
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model 24V-GT10-LTE-RM Form No. SJ-24V-GT10-LTE-RM-880E-MR2-V2
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
CORDLESS GRASS TRIMMER
24-VOLT MAX* | 2.0 Ah | 10 INCH
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model 24V-GT10-LTE-RM Form No. SJ-24V-GT10-LTE-RM-880E-MR2-V2
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
mCAUTION!
Before using this cordless tool, carefully read and observe the
safety rules and instructions listed below. Before starting work,
make sure that you know how to stop the machine in case of
an emergency. The incorrect use of this machine could cause
serious injury. Keep these instructions in a safe place and on
hand so that they can be consulted when required.
mCAUTION!
The cordless grass trimmer should only be used for cutting
lawns. Other uses of the trimmer that are not indicated in these
instructions could damage the trimmer or seriously injure the
operator.
GENERAL Safety Rules
mWARNING! Read all safety warnings and
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
1. Prevent unintentional starting. Ensure the switch is in the
o-position before connecting to battery pack, picking up
or carrying the appliance. Carrying the appliance with your
nger on the switch or powering an appliance that has the
switch on invites accidents.
2. Disconnect the battery pack from the appliance before
making any adjustments, changing accessories, or storing
appliance. Such preventive safety measures reduce the
risk of starting the appliance accidentally.
3. Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
4. Use appliances only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
5. When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a re.
6. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
7. Do not use a battery pack or appliance that is damaged
or modied. Damaged or modied batteries may exhibit
unpredictable behavior resulting in re, explosion or risk
of injury.
8. Do not expose a battery pack or appliance to re or
excessive temperature. Exposure to re or temperature
above 265°F (130°C) may cause explosion.
9. Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specied in the instructions. Charging improperly
or at temperatures outside of the specied range may
damage the battery and increase the risk of re.
10. Have servicing performed by a qualied repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
11. Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
12. Replacement parts – When servicing, use only identical
replacement parts.
13. Avoid dangerous environments – Do not use appliances
in damp or wet locations. Do not use in rain.
14. Keep children and bystanders away – Children and
other spectators, including pets, should be kept at least
50 feet (15 meters) away from the work area. When the
grass is cut, stones and debris contained in the grass
can be picked up by the blade and dispersed into the
air. These ying projectiles can cause blindness or other
bodily injury.
15. Dress properly – Always wear suitable clothing when
using the trimmer to prevent head, hand, or feet injuries.
Do not wear loose clothing or jewelry. They can get caught
in moving parts. Use of rubber gloves and substantial
footwear is recommended when working outdoors. Wear
protective hair covering to contain long hair.
16. Use safety glasses – Also use safety footwear, snug-
tting clothing, protective gloves, hearing and head
protection. Always use face or dust mask if operation is
dusty.
2
17. Use the right tools – Do not use tools for any job except
that for which they are intended.
18. Avoid unintentional starting – Don’t insert battery pack in
appliance with nger on switch. Be sure switch is o when
insert battery pack.
19. Disconnect applianceDisconnect the appliance from
the battery pack when not in use, before servicing, when
changing accessories.
20. Do not force the tool – It will do the job better and with
less likelihood of injury if it is used at the rate for which it
was designed.
21. Do not overreach Keep proper footing and balance at
all times.
22. Stay alert – Watch what you are doing. Use common
sense. Do not operate the trimmer when you are tired, or
under the inuence of alcohol or drugs.
23. Store idle tools indoors – When not in use, tools should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
24. Maintain tools with careFollow instructions for
lubricating and changing accessories. Inspect the trimmer
periodically and replace if damaged. Repair the trimmer
only at an authorized service facility. Keep handles dry,
clean, and free from oil and grease.
25. Checked for damaged parts – Before continuing to use
the trimmer, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
the alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may aect the trimmer's operation. A guard or other
part that is damaged should be properly repaired or
replaced by an authorized service center unless indicated
elsewhere in this manual.
ADDITIONAL SAFETY INSTRUCTIONS
FOR GRASS TRIMMER
1. Keep guards in place and in working order.
2. Keep hands and feet away from the cutting area.
mWARNING! Never use steel blades or other devices.
Use of any other accessories or attachments will increase the
risk of injury.
mCAUTION! The safety guard is critical to the safety
of the operator and the safety of people standing within a safe
distance of the trimmer. The safety guard keeps the trimmer
in good working order and must always be in place during
operation.
• Do not try to stop the trimmer blade with your hands.
Always let it come to a stop by itself.
mWARNING! After switching o the tool, the cutting
blade continues to rotate for a few seconds.
• Only use the original type of nylon grass blades. Do not
under any circumstances use metal line or nylon line instead
of the blade.
• Do not use the tool to cut grass which is not on the ground.
For example, do not cut grass growing on walls or rocks.
• Do not switch on the tool in an enclosed or poorly ventilated
space or in the presence of ammable and/or explosive
substances such as liquids, gases and powders.
• Only cut during broad daylight or with adequate
articial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths while the tool is
still running.
• When the tool is not in use, store it in a dry place and out of
reach of children.
• After use, remove the battery and check for damage. If you
have any doubt about the condition of the tool, contact an
authorized service center or call the Snow Joe® + Sun Joe®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
• Only use the tool according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts.
Contact an authorized service center or call the Snow Joe ®
+ Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Battery + Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only be
guaranteed if undamaged cells are used. Incorrect handling of
the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.


Specyfikacje produktu

Marka: Sun Joe
Kategoria: Podcinacz
Model: 24V-GT10-LTE-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe 24V-GT10-LTE-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz Sun Joe

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz

Black & Decker

Black & Decker GL570 Instrukcja

15 Października 2024
Husqvarna

Husqvarna 236R Instrukcja

14 Października 2024
RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
Husqvarna

Husqvarna 110iL Instrukcja

9 Października 2024
Toro

Toro 51434 Instrukcja

8 Października 2024
Toro

Toro 51490 Instrukcja

8 Października 2024
Toro

Toro 51494 Instrukcja

8 Października 2024
Toro

Toro 51498T Instrukcja

8 Października 2024
Toro

Toro 51653 Instrukcja

8 Października 2024
Toro

Toro i51020 Instrukcja

8 Października 2024