Instrukcja obsługi Sun Joe 24V-DD-LTE-RM

Sun Joe Wiertarka 24V-DD-LTE-RM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 24V-DD-LTE-RM (20 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-DD-LTE-RM Form No. SJ-24V-DD-LTE-RM-880E-M-V1

CORDLESS DRILL/DRIVER

24-VOLT MAX* | 2.0 Ah | TOOL CASE

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

CORDLESS DRILL/DRIVER

24-VOLT MAX* | 2.0 Ah | TOOL CASE

Model 24V-DD-LTE-RM Form No. SJ-24V-DD-LTE-RM-880E-M-V1

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! When using the drill/driver basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered,

dark areas invite accidents.

2. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

3. Do not operate power tools in explosive atmospheres

– Such as in the presence of ammable liquids, gases,

or dust. Power tools create sparks which may ignite the

dust or fumes.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the drill/driver when you are tired,

or under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the drill/driver

with your nger on the trigger. Make sure the switch is o

before connecting the drill/driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless drill/driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

7. Do not use on a ladder or unstable support –

Stable footing on a solid surface enables better control of

the power tool in unexpected situations.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Donotusedrill/driverifswitchdoesnotturnonoro

– The drill/driver that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

battery pack from the drill/driver before making any

adjustments, changing accessories, or storing the

drill/driver – Such preventive safety measures reduce risk

of starting the power tool accidentally.

4. Store idle drill/driver out of reach of children or other

untrained persons – Drill/driver is dangerous in the hands

of untrained users.

5. Maintain cordless drill/driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may aect the drill/driver's operation.

If damaged, have the drill/driver serviced before using.

Many accidents are caused by poorly maintained tools.

6. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed – Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

Battery Tool Use and Care

1. Rechargeonlywiththechargerspeciedbythe

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Charge internal battery at ambient temperatures

between 50ºF – 104ºF (10ºC – 40ºF).

3. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs,ushwithwater.Ifliquidcontactseyes,

seek medical help – Liquid ejected from the battery may

cause irritation or burns.

4. Usepowertoolsonlywithspecicallydesignated

battery packs – Use of any other battery packs may

create a risk of injury and re.

5. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another – Shorting the

battery terminals together may cause burns or a re.

Service

1. If your power tool requires service, contact an

authorized Snow Joe® + Sun Joe® dealer or call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) – Only identical

replacement parts should be utilized for repairs. This will

ensure that the safety of the power tool is maintained.

2. If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard – Contact

the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Rules for Cordless

Drill/Driver

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring –

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

2. Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as well

asthespecicpotentialhazardsrelatedtothispower

tool – Following this rule will reduce the risk of electric

shock, re, or serious injury.

3. Make sure approved eye protection is being worn

and properly adjusted and secured at all times the

drill/driver is being used – There is a possibility that

small pieces of metal could shear o from over-tightened

screws while using the tool.

4. Protect your lungs. Wear a face or dust mask if the

operation is dusty – Following this rule will reduce the

risk of serious personal injury.

5. Protect your hearing. Wear hearing protection during

extended periods of operation – Following this rule will

reduce the risk of serious personal injury.

6. Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories – Following this rule will reduce the risk of

electric shock, re, or serious personal injury.

7. Donotplacebatterytoolsortheirbatteriesnearreor

heat – This will reduce the risk of explosion and possibly

injury.

8. Do not crush, drop or damage battery pack. Do not

use a battery pack or charger that has been dropped

or received a sharp blow – A damaged battery is subject

to explosion. Properly dispose of a dropped or damaged

battery immediately.

9. Batteries can explode in the presence of a source

of ignition, such as a pilot light – To reduce the risk of

serious personal injury, never use any cordless product

in the presence of open ame. An exploded battery can

propel debris and chemicals. If exposed, ush with water

immediately.

10. Do not charge battery tool in a damp or wet location –

Following this rule will reduce the risk of electric shock.

Battery + Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the cordless drill/driver and cause

it to malfunction, which can lead to serious personal injury.

mCAUTION! To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery pack only in its designated

iON+ 24V lithium-ion charger. Other types of chargers present

risk of re, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery

outside in freezing weather; charge it at room temperature.

Specyfikacje produktu

Marka:	Sun Joe
Kategoria:	Wiertarka
Model:	24V-DD-LTE-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe 24V-DD-LTE-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Wiertarka Sun Joe

Sun Joe 24V-DDK-LTX-PNK Instrukcja

14 Października 2024

Sun Joe 24V-DD-LTE Instrukcja

8 Sierpnia 2024

Sun Joe 24V-DD-LTE-RM Instrukcja

2 Lipca 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Ozito BDP-500 Instrukcja

15 Października 2024

Einhell BM-G1100 E Instrukcja

14 Października 2024

DeWalt DWD450 Instrukcja

14 Października 2024

Black & Decker GC1800 Instrukcja

13 Października 2024

Rupes BH 252R Instrukcja

13 Października 2024

Makita HP2070 Instrukcja

13 Października 2024

Makita DHR263ZJ Instrukcja

12 Października 2024

Black & Decker BDCDE120 Instrukcja

10 Października 2024

Gamma BH-1500W Instrukcja

9 Października 2024

Flex IW 1/2" 1500 18-EC Instrukcja

9 Października 2024