Instrukcja obsługi Sun Joe 20VIONLTE-HT20-RM

Sun Joe nożyce do żywopłotu 20VIONLTE-HT20-RM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 20VIONLTE-HT20-RM (13 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/13

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 20ViONLTE-HT20-RM Form No. SJ-20ViONLTE-HT20-RM-880E-M-V1

RCORDLESS HEDGE TRIMMER

20" | 20-VOLT MAX

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 20ViONLTE-HT20-RM Form No. SJ-20ViONLTE-HT20-RM-880E-M-V1

RCORDLESS HEDGE TRIMMER

20" | 20-VOLT MAX

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this hedge trimmer must read,

understand, and follow these instructions in their entirety.

Failure to follow these instructions may result in ELECTRIC

SHOCK, FIRE PERSONAL INJURY. , and/or serious

Notice the personal safety alert symbol used in this m

manual to draw your attention to a given along WARNING

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The moving blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Before using the hedge trimmer, familiarize yourself with

the controls, especially how to stop the hedge trimmer in

an emergency. The only individuals who should use the

hedge trimmer are those who thoroughly understand these

instructions and know how to properly operate the unit.

Children should never be allowed access to the hedge trimmer.

Retain this manual for future reference and reread it at the start

of each trimming season.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

cords immediately.

3. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

5. Use the right tool – Do not use this machine for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

7. Avoid accidental starting – Do not carry the hedge

trimmer with your nger on the switch. Make sure the

switch is o before inserting the battery.

mCAUTION! Moving parts will continue to run for several

seconds after turning o the machine.

8. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

9. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

10. Do not overreach – Keep proper footing and balance at

all times.

11. Use safety glasses – Also use safety footwear, snug-

tting clothing, protective gloves, hearing, and head

protection.

12. Remove the battery – Remove the battery when it is not

in use, before servicing it, when changing accessories,

and when performing any other maintenance task.

13. Store idle tool indoors – When not in use, the hedge

trimmer should be stored indoors in a dry and high or

locked-up place out of the reach of children.

14. Maintain the hedge trimmer with care – Keep the

cutting edges sharp and clean for optimal performance

and to reduce the risk of injury. Keep the handles

dry, clean, and free from oil and grease. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may aect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools. Follow the additional

recommendations described in the maintenance section

of this manual.

15. Avoid dangerous environments – Do not use the hedge

trimmer in rain or in damp or wet locations. Do not operate

the hedge trimmer in gaseous or explosive atmospheres

or use the hedge trimmer near ammable or combustible

liquids. Motors in these tools normally spark, and the

sparks might ignite fumes.

16. Stay alert – Watch what you are doing. Use common

sense. Do not operate the hedge trimmer when you are

– adjusting the working position of the cutting device;

– before clearing a blockage;

– before checking, cleaning or working on the product;

– after striking a foreign object;

– whenever the product starts vibrating abnormally.

6. While operating the hedge trimmer, always ensure that

the operating position is safe and secure, especially when

using steps or a ladder.

7. Do not operate the hedge trimmer with a damaged or

excessively worn cutting device.

8. Always ensure that all handles and guards are tted

when using the hedge trimmer. Never attempt to use

an incomplete hedge trimmer or one tted with an

unauthorized modication.

9. Always use two hands to operate a hedge trimmer tted

with two handles.

10. Always be aware of your surroundings and stays alert for

possible hazards of which you may not be aware due to

the noise of the product.

11. Take care against injury to feet and hands from the cutting

device.

12. Always ensure that the air vents are kept clear of debris.

13. Wear slip-resistant foot protection and protective clothing

when using this product.

14. Always keep proper footing and operate the product

only when standing on a xed, secure and level surface.

Change working positions regularly to avoid tiredness and

ensure a comfortable working position at all times.

15. Never use replacement parts or accessories not provided

or recommended by the manufacturer.

16. The use of this product may be restricted by regional or

local regulations.

Vibration + Noise Reduction

To reduce the impact of noise and vibration emission, limit the

time of operation, use low-vibration and low-noise operating

modes as well as wear personal protective equipment.

Take the following points into account to minimise the vibration

and noise exposure risks.

1. Only use the product as intended by its design and these

instructions.

2. Ensure that the product is in good condition and well

maintained.

3. Use correct attachments for the product and ensure they

are in good condition.

4. Keep tight grip on the handles/grip surface.

5. Maintain this product in accordance with these

instructions and keep it well lubricated (where

appropriate).

6. Plan your work schedule to spread any high vibration tool

use across a longer period of time.

Emergency

Familiarize yourself with the use of this product by means of

this instruction manual. Memorize the safety directions and

follow them to the letter. This will help to prevent risks and

hazards.

1. Always be alert when using this product, so that you can

recognize and handle risks early. Fast intervention can

prevent serious injury and damage to property.

2. Switch o and remove the battery if there are

malfunctions. Have the product checked by a qualied

professional and repaired, if necessary, before you

operate it again.

Residual Risks

Even if you are operating this product in accordance with all

the safety requirements, potential risks of injury and damage

remain. The following dangers can arise in connection with the

structure and design of this product:

1. Health defects resulting from vibration emission if the

product is being used over long periods of time or not

adequately handled and properly maintained.

2. Injuries and damage to property due to broken cutting

attachments or the sudden impact of hidden objects

during use.

3. Danger of injury and property damage caused by ying

objects.

mWARNING! This product produces an electromagnetic

eld during operation. This eld may under some

circumstances interfere with active or passive medical

implants! To reduce the risk of serious or fatal injury, we

recommend persons with medical implants to consult their

doctor and the medical implant manufacturer before operating

this product.

Specyfikacje produktu

Marka:	Sun Joe
Kategoria:	nożyce do żywopłotu
Model:	20VIONLTE-HT20-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe 20VIONLTE-HT20-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Sun Joe

Sun Joe SJH904E-RM Instrukcja

14 Września 2024

Sun Joe 24V-HT22-LTE Instrukcja

9 Września 2024

Sun Joe 20VIONLTE-HT20-RM Instrukcja

28 Sierpnia 2024

Sun Joe HJ604C Instrukcja

19 Sierpnia 2024

Sun Joe 24V-PHT17-LTE Instrukcja

5 Lipca 2024

Sun Joe 24V-X2-24HT-CT Instrukcja

4 Lipca 2024

Sun Joe HJ604C-PRP-RM Instrukcja

3 Lipca 2024

Sun Joe 24V-HT22-CT-RM Instrukcja

2 Lipca 2024

Sun Joe HJ604C-RED Instrukcja

2 Lipca 2024

Sun Joe 24V-PHT17-CT Instrukcja

2 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani WPET1206 - XXL Instrukcja

15 Października 2024

Tanaka THT-2000SB Instrukcja

15 Października 2024

Black & Decker BHT518 Instrukcja

14 Października 2024

MacAllister MHTP24EB Instrukcja

13 Października 2024

Husqvarna 226HS99S Instrukcja

12 Października 2024

Husqvarna 122HD60 Instrukcja

11 Października 2024

Florabest FHT 600 B2 Instrukcja

11 Października 2024

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Dolmar HT-2460 Instrukcja

9 Października 2024