Instrukcja obsługi Sun Joe 20VION-CS10-RM

Sun Joe Maszyna do piłowania 20VION-CS10-RM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 20VION-CS10-RM (28 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 20ViON-CS10-RM Form No. SJ-20ViON-CS10-RM-880E-M-V1

RCORDLESS CHAIN SAW

20 VOLT | 10-INCH

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 20ViON-CS10-RM Form No. SJ-20ViON-CS10-RM-880E-M-V1

RCORDLESS CHAIN SAW

20 VOLT | 10-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person, make

sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to recommended 7.9 inch (20 cm), not to

exceed a max cut of 9.5 in. (24 cm) in diameter depending on

type of wood. All of the wooden objects intended to be cut

with this chain saw should be no thicker than the guide bar's

maximum cutting capabilities.

Improper Use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• Trimming hedges;

• Carving;

• Sectioning pallets, crates, and various packing materials;

• Sectioning furniture or other materials with nails, screws, or

other metal components;

• Butchering meat;

• Using the machine to lift, move, or split objects;

• Using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using electric/cordless yard tools,

basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury, including the

following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Do not use in dangerous environments – Do not use

power tools in damp or wet locations.

5. Do not use the chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

15. Reduce the risk of unintentional starting – Make sure

not press the trigger switch before inserting the battery.

16. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

17. Check for damaged parts – Before each use, repair, or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

18. Never leave tool unattended while it is running – Turn

the power OFF by removing the power cord directly from

its socket. Do not leave the saw until the cutting bar

comes to a complete stop.

19. Avoid unintentional starting – Do not carry the cordless

chain saw with your nger on the switch.

20. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

21. Stay alert – Watch what you are doing. Use common

sense. Do not operate the chain saw when you are tired.

22. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

mWARNING! Some dust and debris created by the

use of the tool could contain chemicals known to the State

of California to cause cancer and birth defects or other

reproductive harm. Some examples of these chemicals are:

• Chemicals in fertilizers

• Compounds in insecticides, herbicides, and pesticides

• Arsenic and chromium from chemically treated lumber

Your risk from exposure to these chemicals varies, and

depends on how often you do this type of work. To reduce

your exposure, work in a well-ventilated area and with

approved safety equipment, such as dust masks that are

specially designed to lter out microscopic particles.

Chain Saw Safety Warnings

• Keep all parts of the body away from the saw chain when

the chain saw is operating. Before you start the chain saw,

make sure the saw chain is not contacting anything. A

moment of inattention while operating the chain saw may

cause entanglement of your clothing or body with the saw

chain.

• Always hold the chain saw with your right hand on the rear

handle and your left hand on the front handle. Holding the

chain saw with a reversed hand conguration increases

the risk of personal injury and should never be done.

• Wear safety glasses and hearing protection. If you are

using the chain saw every day under normal conditions,

you can be exposed to a noise level of 85 dB (A) or higher.

Further protective equipment for head, hands, legs and

feet is recommended. Adequate protective clothing will

reduce personal injury by ying debris or accidental

contact with the saw chain.

• Do not operate the chain saw in a tree. Operation of a

chain saw while up in a tree may result in personal injury.

• Always keep proper footing and operate the chain saw

only when standing on a xed, secure and level surface.

Slippery or unstable surfaces such as ladders may cause

a loss of balance or control of the chain saw.

• When cutting a limb that is under tension, be cautious

of spring back. When the tension in the wood bers is

released, the spring-loaded limb may strike the operator

and/or throw the chain saw out of control.

• Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you o balance.

• Carry the chain saw by the front handle with the chain saw

switched o and away from your body. When transporting

or storing the chain saw, always t the guide bar cover.

Proper handling of the chain saw will reduce the likelihood

of accidental contact with the moving saw chain.

• Follow instructions for lubricating, chain tensioning and

changing accessories. An improperly tensioned or poorly

lubricated chain may either break or increase the chance

for kickback.

• Keep handles dry, clean and free from oil and grease.

Greasy, oily handles are slippery and can cause loss of

control.

• Cut wood only. Do not use the chain saw for any other

purpose. For example, do not use the chain saw to cut

plastic, masonry or non-wood building materials. Using

the chain saw in these incorrect ways could result in

serious damage to you and your tool.

Battery & Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

Specyfikacje produktu

Marka:	Sun Joe
Kategoria:	Maszyna do piłowania
Model:	20VION-CS10-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe 20VION-CS10-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Sun Joe

Sun Joe iON8PS2 Instrukcja

24 Września 2024

Sun Joe 24V-HCSWP-CT Instrukcja

20 Września 2024

Sun Joe 24V-CSSHRP-LTE-RM Instrukcja

16 Września 2024

Sun Joe SWJ803E Instrukcja

15 Września 2024

Sun Joe SWJ699E-RED-RM Instrukcja

5 Września 2024

Sun Joe 24V-PS10-CT Instrukcja

4 Września 2024

Sun Joe 24V-PS10-CT-RM Instrukcja

3 Września 2024

Sun Joe 20VION-CS10-RM Instrukcja

3 Września 2024

Sun Joe BDL-A0201 Instrukcja

2 Września 2024

Sun Joe 24V-X2-CS16-CT Instrukcja

1 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita 5603 Instrukcja

15 Października 2024

MSW -TAS287 Instrukcja

15 Października 2024

MSW T-SAW300 Instrukcja

15 Października 2024

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Ferm FKS-165 Instrukcja

14 Października 2024

Royal Catering RCBS-1650 Instrukcja

14 Października 2024

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024

Husqvarna 365H Instrukcja

13 Października 2024

Makita DJV181Z Instrukcja

12 Października 2024