Instrukcja obsługi Strymon Riverside

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Strymon Riverside (17 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
USER MANUAL
Riverside - Multistage Drive
®
pg 2
Front Panel
• GAIN
Toggles between the low or
high gain channel.
• DRIVE
Adjusts the amount of
gain applied to the signal.
Employs continuously
variable circuit tuning
to adjust many circuit
parameters as you turn the
knob.
• BASS
Active shelving/parametric
low frequency control.
• FAVORITE
Used to recall a single stored favorite setting, which consists of all knob,
switch, and noise gate settings.
RED LED indicates that the Favorite setting is selected. Press and hold
Favorite switch for 2 seconds to save a new favorite sound.
COMPARE MODE
With FAVORITE on, LED turns from from if current position is RED to GREEN
identical to saved favorite.
• PUSH
Toggles between flat
or enhanced midrange
frequencies.
• LEVEL
Controls the output volume
level when the effect is ON.
• TREBLE
Wide-ranging high frequency
active shelf control.
• MIDDLE
Parametric mid boost/
cut control with optimized
frequency center.
• ON
Bypasses analog and digital
gain stages. Defaults to
relay based true bypass, but
can also be set to buffered
bypass mode in which the
volume pedal and boost
functionality are preserved.
Riverside - Multistage Drive
®
pg 3
Rear Panel
• POWER
Use an adapter with the following rating:
9VDC center negative. 250mA minimum.
• PRESENCE SWITCH
Tailors the top end character of the output
to match your amp. Try minus (-) or center
in front of an amp. Try plus (+) when
plugging straight into a power amp.
• BOOST
Boost Switch Mode - Use an external Favorite
switch to toggle up to +6dB of post boost on/off
( ).See page 8 for setup
Favorite Output Mode – Connect to the EXP input
of another Strymon pedal set to work in Favorite
EXP mode to toggle the Favorite setting of that
pedal with the on-board FAVORITE switch (See
page 8 for setup).
• EXP
Can be used in one of two ways with a standard
TRS expression pedal:
Expression Pedal Mode – Allows continuous
control over any of the knobs (See page 11 for
more info).
Volume Mode – Allows control of the output
volume of the effect ( ).See page 11 for more info
• IN
Mono instrument input.
• OUT
Mono signal output.

Specyfikacje produktu

Marka: Strymon
Kategoria: Niet gecategoriseerd
Model: Riverside

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Strymon Riverside, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Strymon

Strymon

Strymon Riverside Instrukcja

25 Września 2024
Strymon

Strymon Brigadier Instrukcja

25 Września 2024
Strymon

Strymon El Capistan Instrukcja

25 Września 2024
Strymon

Strymon Ojai Instrukcja

25 Września 2024
Strymon

Strymon Timeline Instrukcja

25 Września 2024
Strymon

Strymon Bluesky Instrukcja

25 Września 2024
Strymon

Strymon StarLab Instrukcja

25 Września 2024
Strymon

Strymon Zuma Instrukcja

25 Września 2024
Strymon

Strymon Ola Instrukcja

25 Września 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd