Instrukcja obsługi Strymon Orbit


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Strymon Orbit (6 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
dBucket Flanger
®
USER MANUAL
Orbit - dBucket Flanger User Manual
®
pg 2
Switches between positive, negative and
positive/negative feedback. With positive
feedback, the wet and dry signals are in
phase, producing a jet-like swish when
higher settings are used. REGEN
Negative Feedback creates ‘hollow’ or
watery’ flange sounds. The Feedback +/-
settings uses a unique frequency
dependent feedback that combines
elements of both Positive and Negative
to create new sonic possibilities.
Controls the
feedback
intensity of the
flanging effect.
Adjusts flanger
LFO speed.
Adjusts flanger
LFO width.
Switches between logarithmic, linear and
through zero LFOs. The LOG setting produces
an even-sounding frequency sweep.
LIN setting produces a frequency sweep
that speeds up as it goes higher, and slows
down as you go lower. With the LOG and
LIN settings respectively, you can cover
two classic flanger sounds with the flip of a
switch. advances the wet signal ahead Thru 0
of the dry signal for dramatic flanging effects
unavailable in most flangers.
Adjusts . wet/dry mix
Most flangers don’t
include this control
but it can be very
handy if an extreme
flanging sound
needs to be tamed
without altering the
fundamental effect
sound.
Controls the delay
time of the flanging
effect. Higher
settings produce
higher frequency
flanging effects,
while lower settings
produce lower
frequency flanging
effects. Its impact
is most easily heard
with lower Width
settings and higher
Regen settings.
Press to select saved favorite sound. When
FAVORITE LED is lit the favorite setting is
engaged. When each knob is turned, the
LED will indicate the saved favorite position
of the knob. Push and hold the foot switch
to save a new favorite sound.
Engages and disengages
effect. Bypass mode is always
true bypass. LED on indicates
that the effect is engaged.
WIDTHSPEED
REGEN
pos
+/-
neg
BYPASSFAVORITE
dBucket Flanger
®
MANUALMIX
FEEDBACK LFO
log
lin
thru 0
Front Panel
Orbit - dBucket Flanger User Manual
®
pg 3
EXP
INPUT
9VDC
+-
RIGHT OUTLEFT OUT
High impedance
mono input.
Stereo outputs.
Use LEFT OUT
for mono signal
output.
Standard center 9V DC
negative power input.
250 mA available
current required.
Connect a standard TRS
expression pedal for continuous
control over any selectable knob
parameter. To select the knob
controlled by the expression
pedal, hold the FAVORITE
footswitch during power up.
The is then first knob turned
then assigned to the expression
pedal. The maximum position the
knob is turned up to becomes
the expression pedal “toe down”
maximum value.
Rear Panel


Specyfikacje produktu

Marka: Strymon
Kategoria: Nie skategoryzowane
Model: Orbit

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Strymon Orbit, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Strymon

Strymon

Strymon Orbit Instrukcja

30 Stycznia 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane