Instrukcja obsługi Strong SRT ANT 45

Strong Antena SRT ANT 45

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Strong SRT ANT 45 (8 stron) w kategorii Antena. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

UHF &

VHF

Low noise

amplifier

2-way

mounting

Outdoor

Antenna

5 V active

antenna

Water-

proof

resistant

Digital Acve Outdoor DVB-T/T2 Antenna

SRT ANT 45

Picture similar

User Manual

Manuel d’utilisateur

Bedienungsanleitung

Istruzioni d’uso

Manual de usuario

Manual do Usuário

Bruksanvisning

Bruger Manual

Käyttöohje

Használati útmutató

Návod k obsluze

Používateľská príručka

Instrukcja obsługi

Korisnički priručnik

Uputstvo za upotrebu

Manual de utilizare

Ръководство на потребителя

31 Jan 2018 15:20

Supplied by STRONG, Austria

Represented by

STRONG Ges.m.b.H.

Franz-Josefs-Kai 1

1010 Vienna

Austria

Email: support_at@strong.tv

English

1.0 INTRODUCTION

Thank you for purchasing the STRONG SRT ANT 45 DVB-T/T2 antenna. This antenna has been specially

designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial Receiver (DVB-T/

T2), and is specially designed for outdoor use. The antenna housing is UV protected and weather-proof

sealed. With the supplied multi-functional mounting material, you can install the antenna on a wall, on

your balcony or on a pole outside the house.

This DVB-T/T2 antenna is an “Active type” antenna, it has a built-in low noise amplifier that amplifies the

received signal for better performance. The antenna therefore needs 5 V power supplied by your terrestrial

receiver, or by an AC/DC adapter (supplied with the antenna).

We recommend that you carefully read this user manual before you install the antenna. This will help you

to get the best performance of your antenna.

Specications

Frequency range: VHF 174 ~ 230 MHz, UHF 470 ~ 790 MHz with LTE filtering

Gain: 20 dB for VHF and 16 dB for UHF

RF Output Impedance 75 Ohm

Power Supply:

2 powering methods:

5 V DC/40 mA via ANTENNA connector of the digital terrestrial

receiver or

12 V DC/250 mA via External 230 V AC to DC adapter with power

injector

Special features  Choice of installation methods: wall-mounted or pole-mounted

installation

 Built-in FM and LTE (4G) filter

 Weather-proof and UV protected housing

 Built-in low noise amplifier technology

 Highly directional to optimise accurate pointing to the transmitter

and to reduce pick up of unwanted signals

TABLE OF CONTENTS

1.0 INTRODUCTION 1

2.0 PACKAGE CONTENTS 2

3.0 SAFET Y NOTES 2

4.0 CONNECTING THE ANTENNA 3

5.0 INSTALLATION OF THE ANTENNA 5

Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. LTE is

a trademark of ETSI, all other product names are trademarks or registered trademarks of their respective owners.

31 Jan 2018 15:20