Instrukcja obsługi StrikeMaster Mora

StrikeMaster Niesklasyfikowane Mora

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StrikeMaster Mora (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
HAND AUGER
Owner’s Manual
CHECK BLADE SCREWS BEFORE
AND AFTER EACH USE TO MAKE
SURE THEY ARE TIGHT.
It is recommended that
everyone who uses this product
read the StrikeMaster Hand Auger
Owner’s Manual.
ATTENTION: P R TO FIRST USE
For best results exert firm
pressure downward. DO NOT
ATTEMPT TO FORCE AUGER
TO CUT. If auger does not “Bite”
on contact with the ice, check
for dull or damaged blades.
SM13
!!
Mora®
LazerTM
Synthetic
Ultra-lite
LazerTM
Ice Fishing has become one of the fastest growing and most popular winter sports, allowing the
ardent angler the opportunity to enjoy their favorite outdoor activity.
StrikeMaster® Ice Augers are the finest ice cutting tools ever made for sport fishermen.
With proper care and use these augers will give years of satisfactory service.
The “SUPERIOR” cutting blades on StrikeMaster® augers are razor sharp and will operate
until they become dull or damaged. If dull or not too severely damaged, the blades on the Mora
hand augers can be hand honed to extend blade life. When this procedure no longer works,
replacement blades can be purchased at www.strikemaster.com.
We know that you are anxious to go fishing and use your new hand ice auger, but before you go
fishing, it is important and to your advantage to spend a few minutes getting acquainted with
your new StrikeMaster® hand auger. There is no better way to acquaint yourself with the product
than to read the Owner’s Manual and operating instructions. A few minutes spent studying this
manual before your first ice fishing outing will be time well spent.
Check-mark the model type and record the purchase date in the space below.
Also, please return the enclosed WARRANTY CARD or submit your information at
www.strikemaster.com to validate your limited warranty.
Model: LazerTM Synthetic Ultra-Lite LazerTM Mora®
Date Purchased ______ / ______ / ______
STRIKEMASTER
®
Ice Augers
ATTENTION !!
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED COULD ENDANGER
THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS
IN THIS MANUAL AND ANY PROVIDED WITH OR ON THE EQUIPMENT ON WHICH THIS ENGINE IS USED BEFORE
ATTEMPTING TO OPERATE YOUR STRIKEMASTER® ICE AUGER.
!
!!
1. The cutting blades on the ice augers are razor sharp. Use extreme care when handling.
2. Use caution when removing or replacing blade guard.
3. Use caution when replacing auger blades.
4. Always keep blade guard on auger except when in use.
5. The use of this auger by children is not recommended.
6. After use, the auger blades should be wiped dry and oiled to extend auger life.
7. The manufacturer recommends that all StrikeMaster® hand augers be used for ice cutting only.
8. CHECK BLADE SCREWS BEFORE AND AFTER EACH USE TO MAKE SURE THEY ARE TIGHT.
It is recommended that everyone who uses this product should read this
StrikeMaster Owner’s Manual before operating.
IMPORTANT SAFEGUARDS
OPERATION
! !
Best results can be obtained by exerting firm pressure downward. The auger is designed to “Shave” the ice,
therefore minimum force should be required to operate providing the blades are sharp and in good condition.
When cutting old holes use light pressure on the auger to prevent excess drag. Should some diculty be
encountered, try tipping the auger a few degrees to one side to change the angle of attack. Cutting can be made
easier by penetrating just a few inches and then cleaning the hole of chips before cutting further.
DO NOT ATTEMPT TO FORCE AUGER TO CUT
If auger does not “Bite” on contact with the ice, check for dull or damaged blades.

Specyfikacje produktu

Marka: StrikeMaster
Kategoria: Niesklasyfikowane
Model: Mora

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StrikeMaster Mora, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane StrikeMaster

StrikeMaster

StrikeMaster Magnum MP-1025 Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Magnum MP-825 Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Lazer Pro LMP-8 Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Honda HL-10 Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Mora Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Lazer Mag LM-10 Instrukcja

25 Września 2024
StrikeMaster

StrikeMaster Lazer Mag LM-6 Instrukcja

25 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024