Instrukcja obsługi Stihl MS 341

Stihl piła MS 341

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl MS 341 (134 stron) w kategorii piła. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/134
STIH)
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL RM2,
RMC3 (.325") or RM2, RSC3 (3/8") chain
depending on sprocket or other available low
kickback components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena RM2, RMC3
(.325 pulg) o RM2, RSC3 (3/8 pulg) de STIHL,
dependiendo de la rueda dentada usada y de
otros componentes reductores de
contragolpe.
1MS 341, MS 361, MS 361 C
English / USA
BA_SE_143_007_01_08.fmPri l inted on ch or ne free ape .- p r
Printing inks con ain vege ab t t le oils; p r can be cycled. pa e re
© NDR S IHL G & Co. , 2007A EA ST A KG
04 8 212 8621 . M . 7. . nted n A5 A 1,5 K CP Pri i US
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Mounting the Bar and Chain
(Side chain tensioner) .................... 26
Mounting the Bar and Chain
(Quick chain tensioner) .................. 27
Tensioning the Saw Chain
(Side chain tensioner) .................... 30
Tensioning the Saw Chain
(Quick chain tensioner) .................. 30
Checking Chain Tension ................. 31
Fuel ................................................ 31
Fueling ............................................ 32
Chain Lubricant .............................. 33
Filling Chain Oil Tank ...................... 34
Checking Chain Lubrication ........... 34
Chain Brake .................................... 35
Winter Operation ............................ 36
Electric Handle Heating .................. 37
Information Before You Start .......... 37
Starting / Stopping the Engine ........ 38
Operating Instructions .................... 41
Oil Quantity Control ........................ 42
Taking Care of Guide Bar ............... 42
Air Filter System ............................. 43
Cleaning the Air Filter ..................... 43
Motor Management ........................ 44
Adjusting the Carburetor ................ 44
Spark Arresting Screen
in Muffler ........................................ 46
Checking the Spark Plug ................ 46
Replacing Starter Rope
and Rewind Spring ......................... 47
Storing the Machine ....................... 50
Checking and Replacing
Chain Sprocket ............................... 50
Maintaining and Sharpening
Saw Chain ...................................... 52
Maintenance Chart ......................... 56
Main Parts of the Saw .................... 58
Specifications ................................. 60
Special Accessories ....................... 61
Ordering Spare Parts ..................... 61
Maintenance and Repairs .............. 62
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 63
Trademarks .................................... 65
Allow only persons who understand this
Manual to operate your chainsaw.
To receive maximum performance and
satisfaction from your STIHL chainsaw,
it is important that you read and
understand
the maintenance and safety
precautions,
starting on page 3, before
using your chainsaw.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!Warning!
Because a chainsaw is a high-speed
wood-cutting tool, some special safety
precautions must be observed as with
any other power saw to reduce the risk
of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time. If the
operating characteristics or the
appearance of your chainsaw differs
from those described in this Manual,
please contact your STIHL dealer for
information and assistance.
2
English / USA
MS 341, MS 361, MS 361 C
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
Guide to Using this Manual

Specyfikacje produktu

Marka: Stihl
Kategoria: piła
Model: MS 341

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stihl MS 341, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piła Stihl

Stihl

Stihl MSA 160 C Instrukcja

28 Maja 2024
Stihl

Stihl 018 Instrukcja

24 Maja 2024
Stihl

Stihl HTA 135 Instrukcja

20 Maja 2024
Stihl

Stihl 026 Instrukcja

19 Maja 2024
Stihl

Stihl MS 311 Instrukcja

17 Maja 2024
Stihl

Stihl 046 Instrukcja

16 Maja 2024
Stihl

Stihl MS 441 Instrukcja

13 Maja 2024
Stihl

Stihl MS 362 Instrukcja

13 Maja 2024
Stihl

Stihl 036 Instrukcja

10 Maja 2024
Stihl

Stihl TS 410 Instrukcja

9 Maja 2024

Instrukcje piła

Najnowsze instrukcje dla piła

HiKOKI

HiKOKI C10FSB Instrukcja

24 Października 2024
Alpha Tools

Alpha Tools BSL 750 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 600 E Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools MHK 500 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 520E Instrukcja

22 Października 2024
Makita

Makita 4333 dwde Instrukcja

15 Października 2024
Makita

Makita 5103r Instrukcja

15 Października 2024
Meec Tools

Meec Tools 000-707 Instrukcja

6 Października 2024
Meec Tools

Meec Tools 004-907 Instrukcja

6 Października 2024
Kress

Kress 1400 DS Instrukcja

5 Października 2024