Instrukcja obsługi Stihl 036
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl 036 (56 stron) w kategorii piła. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/56
$.LFNEDFN6DIHW\3UHFDXWLRQV
:DUQLQJ
Kickback may occur when the nose
or tip of the guide bar touches an
object, or when the wood closes in
and pinches the saw chain in the
cut. Tip contact in some cases may
cause a lightning fast reverse
reaction, kicking the guide bar up
and back towards the operator.
Pinching the saw chain along the
top of the guide bar may push the
guide bar rapidly back towards the
operator. Either of these reactions
may cause you to lose control of the
saw which could result in serious
personal injury.
Section 5.12 of ANSI B 175.1-1991
sets certain performance and
design criteria related to chainsaw
kickback. STIHL has developed a
color code system using green and
yellow to help you select a power-
head, bar and chain combination
that complies with the kickback
requirements of the ANSI Standard.
See the sections entitled "Safety
Precautions" and "Specifications"
of this manual.
Do not rely exclusively upon the
safety devices built into your saw.
As a chainsaw user, you should
take several steps to keep your
cutting jobs free from accident or
injury.
1. With a basic understanding of
kickback, you can reduce or eli-
minate the element of surprise.
Sudden surprise contributes to
accidents.
2. Keep a good firm grip on the
saw with both hands, the right
hand on the rear handle,
and the left hand on the front
handle, when the engine is run-
ning. Use a firm grip with
thumbs and fingers encircling
the chainsaw handles.
A firm grip will help you reduce
kickback and maintain control
of the saw.
Don’t let go.
3. Make sure the area in which you
are cutting is free from obstruc-
tions. Do not let the nose of the
guide bar contact a log, branch,
or any other obstruction while
you are operating the saw.
4. Cut at high engine speeds.
5. Do not overreach or cut above
shoulder height.
6. Follow manufacturer’s
sharpening and maintenance
instructions for the saw chain.
7. Only use replacement bars and
chains specified by the manu-
facturer or the equivalent.
8. Reduced kickback bars and low
kickback chains are designed
to reduce the risk of kickback
injury. Ask your STIHL dealer
about these devices.
%2WKHU6DIHW\3UHFDXWLRQV
1. Do QRW operate a chainsaw with
one hand! Serious injury to the
operator, helpers, bystanders,
or any combination of these
persons may result from one-
handed operation. A chainsaw
is intended to be used with two
hands.
2. Do not operate a chainsaw when
you are fatigued.
3. Use safety footwear; snug-fitting
clothing; protective gloves; and
eye, hearing, and head protect-
ion devices.
,PSRUWDQW6DIHW\3UHFDXWLRQVIRU&KDLQ6DZ8VHUV
continued on the back inside cover
Main Parts of Saw 2
Definitions 3
Safety Precautions 4
- The Operator 4
- The Saw 6
- The Use of the Saw 6
- Maintenance, Repair and Storing 23
Mounting the Bar and Chain 25
Tensioning the Saw Chain 26
Fuel Mix 27
Fueling 27
Chain Lubricant 28
Fill Chain Oil Tank 28
Chain Brake 29
- Locking saw chain 29
- Releasing chain brake 29
- Checking operation 29
- Chain brake maintenance 29
Information Before You Start 30
Starting the Saw 31
Checking Chain Lubrication 34
Oil Quantity Control 34
During Break-in Period 35
During Operation 35
After Finishing Work 35
Air Filter System 36
Winter Operation 37
Taking Care of Guide Bar 38
Adjusting Carburetor 39
Motor Management 39
Spark Arresting Screen in Muffler 40
Checking Spark Plug 40
Replacing Starter Rope and
Rewind Spring 41
Checking and Replacing
Chain Sprocket 44
Maintaining and Sharpening
Saw Chain 45
Maintenance Chart 48
Specifications 49
Ordering Spare Parts 50
Storing the Machine 50
STIHL Incorporated Federal Emission
Control Warranty Statement 51
This Manual contains operating and
safety instructions for all STIHL 036
series power saws.
Pay special attention to the safety
precautions outlined on the inside cover
and on pages 4 to 24.
Allow only persons who understand this
Manual to operate your chain saw.
To receive maximum performance and
satisfaction from your STIHL chainsaw,
it is important that you read and under-
stand the maintenance and safety
precautions before using your saw.
Contact your STIHL dealer or the
STIHL distributor for your area if you do
not understand any of the instructions in
this Manual.
:DUQLQJ
Because a chainsaw is a high-speed
wood-cutting tool, some special safety
precautions must be observed as with
any other power saw to reduce the risk of
personal injury. Careless or improper use
may cause serious or even fatal injury.
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time.
If the operating characteristics or the
appearance of your saw differs from
those described in this Manual,
please contact your STIHL dealer for
information and assistance.
&RQWHQWV
0458 138 3021. M8. E0. PM. Printed in USA
Printed on chlorine-free paper
2000 Andreas Stihl AG & Co., Waiblingen
Specyfikacje produktu
| Marka: | Stihl |
| Kategoria: | piła |
| Model: | 036 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Stihl 036, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piła Stihl
17 Maja 2024
16 Maja 2024
13 Maja 2024
10 Maja 2024
7 Maja 2024
Instrukcje piła
- piła Worx
- piła Milwaukee
- piła Bosch
- piła Parkside
- piła Black & Decker
- piła Lider
- piła Hazet
- piła DeWalt
- piła Einhell
- piła Silverline
- piła Husqvarna
- piła Makita
- piła Ozito
- piła RYOBI
- piła DEDRA
- piła Trotec
- piła Güde
- piła Texas
- piła Zipper
- piła McKenzie
- piła Fieldmann
- piła PowerPlus
- piła Vonroc
- piła Metabo
- piła Cocraft
- piła Snow Joe
- piła Yellow Garden Line
- piła Ideal
- piła Kress
Najnowsze instrukcje dla piła
10 Lipca 2024
10 Lipca 2024
9 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024