Instrukcja obsługi StarTech.com WIFI2HDVGA

StarTech.com prezenter bezprzewodowy WIFI2HDVGA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com WIFI2HDVGA (13 stron) w kategorii prezenter bezprzewodowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
Manual Revision: 10/26/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
WIFI2HDVGA
WIFI2HDVGAGE
Presentation hub for wireless video
*actual product may vary from photos
IMPORTANT!: Please keep this manual,
it contains your Software Product Code.
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Instruction Manual
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 0.5cm between the radiator and your body.
Déclaration d’exposition à la radiation
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un
environnement non contrôlé. Cet équipement doit être installé et mis en marche à une
distance minimale de 0.5 cm qui sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver
à leur proximité.
FCC ID: Z7ZMAXMEDIAWIFI2
IC: 11232A-WIFI2HDMC
The Country Code Selection feature is disabled for products marketed in the US/Canada
The device, for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Specyfikacje produktu

Marka: StarTech.com
Kategoria: prezenter bezprzewodowy
Model: WIFI2HDVGA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com WIFI2HDVGA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje prezenter bezprzewodowy StarTech.com

StarTech.com

StarTech.com WIFI2HDVGA Instrukcja

21 Września 2024
StarTech.com

StarTech.com PRESREMOTE Instrukcja

18 Września 2024
StarTech.com

StarTech.com WIFI2HDVGAGE Instrukcja

17 Września 2024

Instrukcje prezenter bezprzewodowy

Najnowsze instrukcje dla prezenter bezprzewodowy

Edimax

Edimax WP-S1300 Instrukcja

10 Października 2024
Vantec

Vantec NBW-100U Instrukcja

7 Października 2024
Barco

Barco XMS Cloud Instrukcja

7 Października 2024
Xcellon

Xcellon WP-10R Instrukcja

6 Października 2024
HuddleCamHD

HuddleCamHD HuddleShare Instrukcja

5 Października 2024
August

August PCR500 Instrukcja

3 Października 2024
SIIG

SIIG CE-WR0012-S1 Instrukcja

3 Października 2024
SIIG

SIIG CE-H26611-S1 Instrukcja

3 Października 2024
SIIG

SIIG CE-WR0112-S1 Instrukcja

3 Października 2024
ByEasy

ByEasy P6000 Instrukcja

2 Października 2024