Instrukcja obsługi StarTech.com ST4000PEXPSE

StarTech.com karta/adapter sieciowy ST4000PEXPSE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com ST4000PEXPSE (10 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

Manual Revision: 11/03/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

ST4000PEXPSE

4 Port PCI Express Gigabit Ethernet PoE PSE

Network Card

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction ............................................................................................ 1

Packaging Contents 1 .................................................................................................................................

System Requirements 1 ..............................................................................................................................

Product Diagram ....................................................................................2

Front View .................................................................................................................................................... 2

LED Indicators.............................................................................................................................................2

Installation ..............................................................................................3

Hardware Installation 3 ..............................................................................................................................

Software Installation 3 ................................................................................................................................

Verifying Installation 4 ................................................................................................................................

Specications .......................................................................................... 5

Technical Support ..................................................................................6

Warranty Information ............................................................................ 6

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	karta/adapter sieciowy
Model:	ST4000PEXPSE
Wysokość produktu:	120 mm
Szerokość produktu:	18 mm
Głębokość produktu:	243 mm
Waga produktu:	102 g
Podręcznik użytkownika:	Tak
Szerokość opakowania:	188 mm
Wysokość opakowania:	66 mm
Głębokość opakowania:	296 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	CE, FCC, REACH, TAA
Standardy komunikacyjne:	IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Maksymalna szybkość przesyłania danych:	2000 Mbit/s
Pełny dupleks:	Tak
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	4
Wewnętrzny:	Tak
Napięcie operacyjne:	48 V
Zakres temperatur (eksploatacja):	0 - 55 °C
Zakres wilgotności względnej:	10 - 90 %
Kod zharmonizowanego systemu (HS):	85176990
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	428 g
Obsługiwany systemy operacyjne Linux:	Tak
Diody LED:	Link, PoE
Zakres temperatur (przechowywanie):	-40 - 75 °C
Zawiera sterowniki:	Tak
Technologia okablowania:	10/100/1000BaseT(X)
Standardowe rozwiązania komunikacyjne:	Ethernet
Funkcja Wake-On-LAN:	Tak
Złącza zasilania Peripheral (Molex) (4-pin):	1
Obsługiwane systemy operacyjne serwera:	Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	9000
Rozmiar bufora:	48 KB
Interfejs hosta:	PCI Express
Automatyczne MDIX IEEE:	Tak
Zestaw układów:	RTL8111E
Ilość złączy zasilających SATA:	1
Rozmiar karty PCI:	Pełna wysokość