Instrukcja obsługi StarTech.com HB30C3A1GEA

StarTech.com karta/adapter sieciowy HB30C3A1GEA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com HB30C3A1GEA (2 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 11, 2022 11:00 AM

Product Diagram (HB30C3A1GEA)

Port Function

1RJ45 Port

• Used to connect the to a .Hub Network Device

• Indicates that a network connection is Green:

established.

• Indicates network activity. Amber:

2USB-A Port (x3) • Used to connect (Mouse, Flash USB Devices

Drive, etc.) to the . Hub

3USB-C Connector • Used to connect the to a .Hub Host Computer

Requirements

For the latest requirements, please visit www.startech.com/HB30C3A1GEA

Package Contents

• USB-A Hub x 1

3-Port USB 3.0 Hub with Gigabit Ethernet | USB-C™ | White

Installation

Hardware Installation

1. Connect the integrated to a USB-C port on the USB Type-C Host Cable Host

Computer.

2. Connect each of your (x 3) to the on the .USB Devices USB-A Ports Hub

3. Connect a (sold separately) to the on the and to a CAT5e/6 Cable RJ45 Port Hub

Network Device.

Driver Installation

Installing the Drivers

Windows:

If the required driver does not automatically install after connecting the Network

Adapter to the host laptop, complete the driver installation manually:

1. Connect the to the (see Hardware Installation), Network Adapter Host Computer

the pop-up will appear.Found New Hardware

2. On the pop-up, click the button.Found New Hardware Cancel

3. Using a web browser, navigate to .

www.startech.com/HB30C3A1GEA

4. On the page, click the tab located in the middle of the screen.Product Support

5. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

6. Click to choose a location to download the .Zip le.Save As

7. Click to open the contents of the .Zip le.Open

8. Select the folder that corresponds to the operating system on the .Host Computer

9. Select the le from the list. Setup.exe

10. Right click the le and select from the pop-up Setup.exe Run as Administrator

menu.

11. Follow the on-screen prompts to complete the installation.

Note: you may need to restart the to complete the installation.Computer

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com

Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp,

The Netherlands

macOS:

1. Connect the to the (see Hardware Installation), Network Adapter Host Computer

the pop-up will appear.Found New Hardware

2. On the pop-up, click the button.Found New Hardware Cancel

3. Using a web browser, navigate to .

www.startech.com/HB30C3A1GEA

4. On the page, click the tab located in the middle of the screen.Product Support

5. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

6. Click on the folder. Download

7. Select the folder.Realtek RTL8153 Mac Network Adapter

8. Click on the le.RTUNICO1.0.17.pkg

9. Follow the on-screen prompts to complete the installation.

Note: you may need to restart the to complete the installation.Computer

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	karta/adapter sieciowy
Model:	HB30C3A1GEA
Kolor produktu:	Biały
Materiał obudowy:	Plastik
Wysokość produktu:	15 mm
Szerokość produktu:	41 mm
Głębokość produktu:	78 mm
Waga produktu:	36 g
Długość kabla:	0.095 m
Szerokość opakowania:	142 mm
Wysokość opakowania:	30 mm
Głębokość opakowania:	170 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	CE, FCC
Ilość portów USB:	3
Obsługiwane systemy operacyjne Mac:	Mac OS X 13.0 Ventura
Standardy komunikacyjne:	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Maksymalna szybkość przesyłania danych:	1000 Mbit/s
Pełny dupleks:	Tak
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	1
Wewnętrzny:	Nie
Zakres temperatur (eksploatacja):	0 - 45 °C
Zakres wilgotności względnej:	5 - 90 %
Kod zharmonizowanego systemu (HS):	85176990
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	102 g
Wysokość skrzyni wzorcowej (zewnętrznej):	310 mm
Długość skrzyni głównej (zewnętrznej):	530 mm
Szerokość skrzyni zbiorczej (zewnętrznej):	330 mm
Zakres temperatur (przechowywanie):	-10 - 70 °C
Technologia okablowania:	10/100/1000BaseT(X)
Standardowe rozwiązania komunikacyjne:	Ethernet
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Funkcja Wake-On-LAN:	Tak
Wersja USB:	3.2 Gen 1 (3.1 Gen 1)
Obsługa funkcji Plug & Play:	Tak
Produkty w skrzyni głównej (zewnętrznej):	60 szt.
Podpora kontroli przepływu:	Tak
Zasilane prze USB:	Tak
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	9000
Interfejs hosta:	USB
Hot-swap:	Tak
Auto-Negocjacja:	Tak
Automatyczne MDIX IEEE:	Tak
Zestaw układów:	VIA/VLI - VL812, Realtek - RTL8153
Tagowanie VLAN:	Tak
Obsługa UASP:	Tak
Obsługa podłączania podczas pracy:	Tak
Liczba portów USB 3.2 Gen 1 (3.1 Gen 1):	3