Instrukcja obsługi StarTech.com ST3300G3UA

StarTech.com karta/adapter sieciowy ST3300G3UA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com ST3300G3UA (2 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 10/22/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST3300G3UA.

Packaging contents

• 1 x 3-port USB 3.0 hub plus Gigabit Ethernet

• 1 x instruction manual

System requirements

• Host computer with a USB 2.0 or USB 3.0 port

• Any of the following operating systems:

• Windows® 10 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 7 (32-bit or 64-bit)

• Windows Server® 2008 R2

• Windows Server 2012

• Mac OS 10.7 and later (tested up to 10.11)

Note: To obtain the maximum USB throughout, you must use a

computer with a USB 3.0 port.

Operating system requirements are subject to change. For the latest

requirements, please visit www.startech.com/ST3300G3UA.

ST3300G3UA

3-Port USB 3.0 Hub Plus Gigabit Ethernet

*actual product may vary from photos

Product diagram

Gigabit RJ45 port USB 3.0 ports

Introduction

The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit

Ethernet adapter that is portable and lightweight. It’s equipped

with three USB 3.0 ports with throughput up to 5Gbps and is also

backward compatible, so you can use it with your USB 2.0 and earlier

devices.

USB 3.0 cable

Power LED

Link and activity LED

Gigabit RJ45 port

USB 3.0 cable

Conrm driver installation

Depending on the version of the operating system that you’re

running, when you connect the hub to your computer, the drivers

are installed automatically.

To make sure that the drivers installed properly, on a computer

running a version of Windows, do the following:

1. On your computer, navigate to Device Manager.

2. Under , check to make sure that there isn’t an Network adapters

exclamation mark next to any of the adapters.

If there is an exclamation mark next to the Realtek USB device, see

the topic for more information.Install a driver

Connect the hub to a computer

1. Connect the USB 3.0 cable on the hub to a USB port on the host

computer.

Note: For the best performance, use a computer with a USB 3.0 port.

2. Connect your Cat 5e/6 network connection to the Gigabit RJ45

port on the hub.

3. Connect up to three USB 3.0 peripherals to the hub as necessary.

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

About the LED indicators

The ST3300G3UA comes equipped with two LED indicators located

on the front of the hub: a power LED and link and activity LED. For

more information about what the LED indicators signify, see the

table below.

LED Behavior Signicance

Power LED Illuminated The hub is receiving power.

Link and

activity LED

Illuminated The hub is connected to a

network.

Link and

activity LED

Blinking An activity or process is

underway.

Install a driver

1. To download the latest drivers, use a Web browser and navigate to

www.startech.com/ST3300G3UA.

2. Click the tab.Support

3. Download the driver.

4. When the download is complete, extract the contents of the

compressed le that you downloaded.

5. Double-click the appropriate driver for the version of Windows

that you’re running and follow the on-screen instructions to

complete the installation.

Note: You may be asked to restart your computer to complete the

installation.

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	karta/adapter sieciowy
Model:	ST3300G3UA
Kolor produktu:	Silver, White
Materiał obudowy:	Aluminium, Plastic
Wysokość produktu:	18 mm
Szerokość produktu:	34 mm
Głębokość produktu:	110 mm
Waga produktu:	75 g
Długość kabla:	0.268 m
Szerokość opakowania:	143 mm
Wysokość opakowania:	32 mm
Głębokość opakowania:	171 mm
Technologia łączności:	Przewodowa
Ilość:	1
Ilość portów USB:	3
Standardy komunikacyjne:	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Maksymalna szybkość przesyłania danych:	5000 Mbit/s
Pełny dupleks:	Tak
Ilość portów Ethernet LAN (RJ-45):	1
Wewnętrzny:	Nie
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Wi-Fi:	Nie
Kod zharmonizowanego systemu (HS):	85176990
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	148 g
Pozostałe obsługiwane systemy operacyjne:	ChromeOS
Wysokość skrzyni wzorcowej (zewnętrznej):	312 mm
Długość skrzyni głównej (zewnętrznej):	490 mm
Szerokość skrzyni zbiorczej (zewnętrznej):	366 mm
Diody LED:	Activity, Link, Power
Zakres temperatur (przechowywanie):	-10 - 70 °C
Technologia okablowania:	10/100/1000BaseT(X)
Standardowe rozwiązania komunikacyjne:	Ethernet
Funkcja Wake-On-LAN:	Tak
Obsługiwane systemy operacyjne serwera:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Wersja USB:	3.2 Gen 1 (3.1 Gen 1)
Produkty w skrzyni głównej (zewnętrznej):	60 szt.
Podpora kontroli przepływu:	Tak
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	9000
Interfejs hosta:	USB
Prędkość przesyły danych przez USB:	5000 Mbit/s
Auto-Negocjacja:	Tak
Automatyczne MDIX IEEE:	Tak
Zestaw układów:	Genesys Logic - GL3520, Realtek - RTL8153
Tagowanie VLAN:	Tak
Liczba portów USB 3.2 Gen 1 (3.1 Gen 1):	3