Instrukcja obsługi StarTech.com PM1115UW
StarTech.com
serwer wydruku
PM1115UW
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com PM1115UW (12 stron) w kategorii serwer wydruku. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Manual Revision: 04/24/2017
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Wireless N USB 2.0 Network Print Server
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Instruction Manual
3
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
Déclaration d’exposition à la radiation:
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un
environnement non contrôlé. Cet équipement doit être installé et mis en marche à une
distance minimale de 20 cm qui sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à
leur proximité.
FCC ID: 2AA3I-PM1115UWB
IC: 11232A-PM1115UWB
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Specyfikacje produktu
| Marka: | StarTech.com |
| Kategoria: | serwer wydruku |
| Model: | PM1115UW |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z StarTech.com PM1115UW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje serwer wydruku StarTech.com
9 Października 2024
8 Października 2024
22 Września 2024
22 Września 2024
20 Września 2024
Instrukcje serwer wydruku
- serwer wydruku TRENDnet
- serwer wydruku D-Link
- serwer wydruku HP
- serwer wydruku Lindy
- serwer wydruku Digitus
- serwer wydruku Netgear
- serwer wydruku Dymo
- serwer wydruku Iogear
- serwer wydruku Intellinet
- serwer wydruku Edimax
- serwer wydruku SEH
- serwer wydruku AirLive
- serwer wydruku LevelOne
- serwer wydruku Sitecom
- serwer wydruku Konig
- serwer wydruku Hawking Technologies
- serwer wydruku Silex
- serwer wydruku Star
- serwer wydruku Hamlet
- serwer wydruku EXSYS
- serwer wydruku Atlantis Land
- serwer wydruku Lantronix
Najnowsze instrukcje dla serwer wydruku
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
2 Października 2024
1 Października 2024
1 Października 2024
28 Września 2024
27 Września 2024