Instrukcja obsługi StarTech.com PEX10000SRI

StarTech.com karta/adapter sieciowy PEX10000SRI

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com PEX10000SRI (2 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 07/15/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/PEX10000SRI.

Package contents

• 1 x 10G SFP+ ber network card

• 1 x 10GBase-SR SFP+ transceiver module (preinstalled)

• 1 x low-prole bracket

• 1 x quick-start guide

System requirements

• PCI Express® enabled computer with an available PCI Express slot

(x8 or x16)

• Any of the following operating systems:

• Windows® 10 (32-bit and 64-bit)

• Windows 8.1 (32-bit and 64-bit)

• Windows 8 (32-bit and 64-bit)

• Windows 7 (32-bit and 64-bit)

• Windows Server® 2008 R2

• Windows Server 2012

• Linux® Kernel 2.6.24 and later

• Microsoft® Hyper-V®

• Phillips head screwdriver (optional)

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/PEX10000SRI.

PEX10000SRI

1-Port 10G SFP+ Fiber Optic Network Card - PCIe - Intel Chip - MM

Introduction

To experience reliable high-performance network connectivity over

multi-mode ber, you can use the PEX10000SRI to add a 10GBase-SR

port to your server or workstation. This SFP+ network card oers up

to 10Gbps of network speed and features the Intel® 82599 chipset.

The PEX10000SRI can be mounted in both low-prole and full-prole

computer systems.

Product diagram

SFP+ slot

Link or activity LED

Mounting bracket

(full-prole pictured)

PCIe p1-x8

connector

*actual product may vary from photos

Bracket screw

Install the low-prole bracket

The PEX10000SRI can be mounted in both low-prole and

full-prole computer systems. The full-prole bracket comes

preinstalled, but you can install the low-prole bracket instead.

1. Remove the from the 10GBase-SR SFP+ transceiver module

SFP+ slot on the SFP+ network card.

2. Use a Phillips head screwdriver to remove the two bracket screws

from the PEX10000SRI.

3. Remove the full-prole bracket from the SFP+ network card.

4. Line up the low-prole bracket with the bracket holes on the back

of the SFP+ network card.

5. Insert the two bracket screws that you removed in step 2 and

tighten them into place.

6. Insert the into the 10GBase-SR SFP+ transceiver module SFP+

slot on the network card

Install the network card in a computer

Warning! PC components can be severely damaged by static

electricity. If an anti-static strap isn’t available, discharge any built-

up static electricity by touching a large, grounded metal surface for

several seconds.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external storage, and

so on).

10GBase-SR SFP+

transceiver module

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Open your computer case. For more information about how to

properly do this, consult the documentation that came with

your computer system.

5. Locate an open PCI Express x8 slot and remove the

corresponding metal cover plate from the back of your

computer case. Consult the documentation that came with your

computer for details about how to do this safely.

This card works in PCIe slots of x8 or x16 lanes.

6. Gently insert the card into the open PCI Express slot and use a

computer case screw (not included) to fasten the bracket to the

back of the case.

7. Place the cover back onto your computer case.

Connect to a network

1. Connect a ber network cable to the 10GBase-SR SFP+

transceiver module on the SFP+ network card and to a

10GBase ber port on your network switch or device.

2. Reconnect the power cable to the back of your computer and

all of the disconnected peripheral devices.

3. Turn on your computer.

About the LED indicators

The PEX10000SRI features a green indicator next Link or activity LED

to the SFP+ slot.

LED behavior Signicance

LED is illuminated Card is connected to the network

LED is blinking Activity is occurring

Install the driver

1. If the Found New Hardware dialog box appears on your screen,

close the dialog box or click Cancel.

2. Navigate to www.StarTech.com/PEX10000SRI.

3. Click the tab.Support

4. Download the driver.

5. When the download is complete, extract the contents of the

compressed le that you downloaded.

6. Double-click the appropriate driver for the version of the OS that

you’re running and follow the on-screen instructions to complete

the installation.

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	karta/adapter sieciowy
Model:	PEX10000SRI
Kolor produktu:	Czarny
Wysokość produktu:	120 mm
Szerokość produktu:	18 mm
Głębokość produktu:	135 mm
Waga produktu:	116 g
Szerokość opakowania:	143 mm
Wysokość opakowania:	30 mm
Głębokość opakowania:	170 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	CE, FCC, REACH
Przeznaczenie:	PC
Standardy komunikacyjne:	IEEE 802.1Q, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3x
Maksymalna szybkość przesyłania danych:	20000 Mbit/s
Pełny dupleks:	Tak
Wewnętrzny:	Tak
Zakres temperatur (eksploatacja):	5 - 50 °C
Zakres wilgotności względnej:	20 - 80 %
Kod zharmonizowanego systemu (HS):	85176990
Waga wraz z opakowaniem:	194 g
Obsługiwany systemy operacyjne Linux:	Tak
Zakres temperatur (przechowywanie):	-20 - 60 °C
Instrukcja szybkiej instalacji:	Tak
Standardowe rozwiązania komunikacyjne:	Włókno
Obsługiwane systemy operacyjne serwera:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Złącze światłowodowe:	SFP+
Podpora kontroli przepływu:	Tak
Uchwyty mocowania dołączone:	Tak
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	15000
Interfejs hosta:	PCI Express
Liczba portów:	1
Zestaw układów:	Intel® 82599
Tagowanie VLAN:	Tak
Szyna niskoprofilowa:	Tak