Instrukcja obsługi StarTech.com MSDREADU3C

StarTech.com Czytnik kart pamięci MSDREADU3C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com MSDREADU3C (2 stron) w kategorii Czytnik kart pamięci. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 07/10/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/MSDREADU3C.

Package contents

• 1 x USB 3.0 card reader/writer for microSD cards - USB-C

• 1 x quick-start guide

System requirements

• microSD card

• Computer, tablet, or device enabled with a USB Type-C™ port

The MSDREADU3C is OS independent and doesn’t require any

additional drivers or software. The MSDREADU3C receives enough

power through the USB bus and doesn’t require an additional power

source.

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/MSDREADU3C.

MSDREADU3C

USB 3.0 Card Reader/Writer for microSD Cards - USB-C

Make sure that you assemble this product according to the

instructions. Failure to do so might result in personal injury or

property damage.

Introduction

The MSDREADU3C provides a quick and easy way to transfer photos

and videos from a microSD™ card to a computer, tablet, or device

that’s enabled with a USB-C™ port. The MSDREADU3C also provides

a safe and portable alternative to storing your microSD cards when

they’re not in use.

Product diagram

Slot cover

microSD card slot

*actual product may vary from photos

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps.

Note: Data transfer rates are dependent upon the speed of the

memory card you are using and the speed capabilities of the USB

port on your host device.

Card support

The MSDREADU3C supports the following card types:

• microSD

• T-Flash

Use the MSDREADU3C

1. Remove the Slot cover from the end of the MSDREADU3C.

2. Gently slide a microSD card into the on the USB microSD card slot

card reader until you feel resistance and the card is fully inserted.

3. Replace the Slot cover onto the end of the USB card reader.

4. Insert the on the USB card reader into the USB port USB-C plug

on your computer, tablet, or device.

5. Follow the instructions specic to the OS that you’re running to

access content on the USB card reader.

USB-C plug

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.