Instrukcja obsługi StarTech.com FCREADMICRO


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com FCREADMICRO (2 stron) w kategorii Czytnik kart pamięci. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
USB Multi Media Memory Card Reader Adapter
FCREADMICRO
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l’utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l’uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Installation
1. Ensure the host computer is powered. Insert the FCREADMICRO
USB type A’ connector into an available USB port on the host
computer.
2. The computer operating system will recognize that the Card
Reader has been connected, and will automatically install the
necessary drivers. Once the reader has been connected to the
computer, the red Connection LED will illuminate, until the
reader is removed from the computer, or the operating system is
instructed to eject the connected media.
To ensure the FCREADMICRO has been properly installed on the
host computer:
A. In a Windows® operating environment, browse to the Control
Panel and double-click on the icon (Start -> Control System
Panel -> System). Click on the Hardware tab, then on Device
Manager. Here, you will nd Generic Storage Device USB Device
listed under Disk Drives, and Generic Volume listed under Storage
Volumes.
B. In a MAC OS operating environment, browse to the System
Proler (Go -> Utilities -> System Proler). Click on , Hardware
then on . In the top right pane, click on USB USB High Speed
Bus; here, you will nd listed.USB Reader
Safe Removal
To prevent damage to the contents of the memory/media card,
please ensure you are following the correct procedure for removing
storage from the operating system you are using.
• In a Windows® operating environment, when the memory/
media card is rst connected, the Safely Remove Hardware icon
will appear. Right-click on the icon, and select Safely Remove
Hardware. When the Safely Remove Hardware window appears,
select , then click on USB Mass Storage Device Stop. This will, in
turn, open the Stop a Hardware Device window.
Select the USB Mass Storage Device again, and click on , then OK
wait for the operating system to notify you that it can now be
safely removed.
• In a MAC OS operating environment, the added memory cards
will appear on the desktop as disk drives. To safely remove the
indicated drive(s), simply click and drag the icon to the Trash.
A. B. WARNING: Please note that when removing media cards
connected to FCREADMICRO, you are required to remove/
eject the device from within the operating system (i.e.
in Windows, use the Safely Remove Hardware function).
Failure to remove devices properly can result in lost data,
or permanent damage to the card or Card Reader. See Safe
Removal (reverse) for further detail.
Instruction Manual
*actual product may vary from photos
Manual Revision: 01/26/2012
For the most up-to-date information, please visit: www.startech.com
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names & Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of
third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body
of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related documents are the property of their
respective holders.
Technical Support
StarTech.coms lifetime technical support is an integral part of our commitment to provide industry-leading solutions.
If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of
online tools, documentation, and downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted,
following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant
its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees
or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise),
loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specications
Supported Card Formats
Memory Stick, MS Pro, MS Duo, MS Pro Duo,
MS MG, MS Micro (M2), Micro SD, Mini SD,
RS MMC/MMC 4.0, Ultra II SD, Extreme SD,
Extreme II SD, T-Flash (No Adapter Required)
Form Factor USB
Operating System Support Windows 98SE/ME/2000/XP/7/Vista and
Mac OS 9 and above
Connector Type 1 x USB A Male
Maximum Data Transfer
Rate 480000 Kbps


Specyfikacje produktu

Marka: StarTech.com
Kategoria: Czytnik kart pamięci
Model: FCREADMICRO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com FCREADMICRO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Czytnik kart pamięci StarTech.com

Instrukcje Czytnik kart pamięci

Najnowsze instrukcje dla Czytnik kart pamięci

Urban Factory

Urban Factory ICR32UF Instrukcja

9 Października 2024
DeLock

DeLock 91004 Instrukcja

9 Października 2024
Icy Dock

Icy Dock MB123SRCK-1B Instrukcja

8 Października 2024
Konig

Konig CSU3H4P200BL Instrukcja

8 Października 2024
Vantec

Vantec UGT-CR615 Instrukcja

7 Października 2024
Vantec

Vantec UGT-CR935 Instrukcja

7 Października 2024
Vantec

Vantec UGT-CR912 Instrukcja

7 Października 2024
Vantec

Vantec UGT-CR945 Instrukcja

7 Października 2024
Vantec

Vantec UGT-CR960 Instrukcja

7 Października 2024