Instrukcja obsługi StarTech.com LAPTOP-ARM-TRAY

StarTech.com Wsparcie dla płaskich paneli LAPTOP-ARM-TRAY

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com LAPTOP-ARM-TRAY (2 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: October 6, 2021 5:50 PM

Product Diagram (LAPTOP-ARM-TRAY)

Component Function

1Laptop Tray • Mount a to a Laptop VESA Monitor Arm, Mount, or

Stand

2Laptop Arms • Holds the securelyLaptop

3Laptop Arm Clips • Attach the to the Padded Clamps Laptop Tray

4Anti-slip Pads • Prevent the from sliding from side-to-sideLaptop

5Ventilation Slots • Promote airow around the base of the Laptop

6Stoppers • Rotate from the horizontal position to vertical

depending on the thickness of the Laptop

VESA Compatible Laptop Tray with Adjustable Padded Arms

Package Contents

• Laptop Tray x 1

• Laptop Arm x 2

• Laptop Arm Clips x 2

• Mounting Screws x 4

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit:

www.StarTech.com/LAPTOP-ARM-TRAY

• VESA Compatible Arm, Mount, or Stand

• 75x75mm and 100x100mm Mounting Hole Patterns

• Phillips Head Screwdriver

Component Function

1VESA Compatible

Mounting Points

• Attach the (not included) to the VESA Bracket

75x75mm and100x100mm VESA Mounting Holes on

the VESA Plate

Front view Back view

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of

third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that

all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual

and related documents are the property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a 5-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such

laws apply, the limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Attaching the Laptop Arms to the Laptop Tray

1. Position the under the right and left-hand sides of the Laptop Arms Laptop Tray

( . Figure 1)

2. Locate the four on the .Rectangular Slots Laptop Arms

3. Align the on the with the edge of the Rectangular Slots Laptop Arms Laptop Tray

and the long as shown in (Figure 1)Ventilation Slot

Note: Place the Laptop onto the Laptop Tray to determine if the current position of

the Padded Clamps will impede the use of the Laptop Ports. Make adjustments to the

locations of the Laptop Arms as necessary. Remove the Laptop after completing the

adjustments.

4. Align from the top of the the four clips of the with the Laptop Tray Laptop Arm Clip

four on the .Rectangular Slots Laptop Arms

5. Install the by pushing it into the . Laptop Arm Clip Laptop Arm Rectangular Slots

Ensure all four clips have engaged.

6. Repeat steps 4 - 5 to install the second on the . Laptop Arm Clip Laptop Arm

Warnings

• Ensure the weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, you may experience personal injury or

damage to the equipment. This product can support the following weight: up to 9.9

lb (4.5 kg).

• The monitor arm, mount, or stand must support the weight of the Laptop and Laptop

Tray.

• Ensure the mounted laptop is properly secured and stable before and after adjusting

the laptop tray position.

Attaching the Laptop Tray to a VESA Bracket

1. Align the on the back of the VESA Compatible Mounting Points Laptop Tray

with the top row VESA mounting points located on the of an arm, VESA Bracket

mount, or stand.

2. Insert the through the and into the Mounting Screws VESA Bracket VESA

Compatible Mounting Points Laptop Tray Laptop Trayon the . Secure the by

tightening the using a . Mounting screws Phillips Head Screwdriver

Mount the Laptop to the Laptop Tray

1. To prevent the from falling without being secured to the tray, adjust the Laptop

Laptop Tray to a stable horizontal position and its weight can be supported by

the arm, mount, or stand.

2. Adjust the to best match the thickness.Stoppers Laptop

3. Rotate the , located at the bottom of the , to unlock the Lever Laptop Arms

Laptop Arms Lever. Leave the unlocked.

4. Pull the apart to the maximum available width.Laptop Arms

5. Place the into the with the on either side. Laptop Laptop Tray Laptop Arms

6. Slide the inwards until they are rmly seated against the sides of Laptop Arms

the . Laptop

7. Rotate the , located at the bottom of the , to lock the Lever Laptop Arms Laptop

Arms.

Figure 1

A: Clips

B: Rectangular Slots

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	Wsparcie dla płaskich paneli
Model:	LAPTOP-ARM-TRAY

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com LAPTOP-ARM-TRAY, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Wsparcie dla płaskich paneli StarTech.com

StarTech.com ARMPIVOTE2 Instrukcja

15 Stycznia 2025

StarTech.com 3M1A3SG-MONITOR-ARM Instrukcja

15 Stycznia 2025

StarTech.com MONSTADJD Instrukcja

14 Stycznia 2025

StarTech.com ARMDUOSS Instrukcja

14 Stycznia 2025

StarTech.com ARMPIVOTB Instrukcja

14 Stycznia 2025

StarTech.com ARMPIVOTV2 Instrukcja

14 Stycznia 2025

StarTech.com ARMDUALSS Instrukcja

14 Stycznia 2025

StarTech.com ARMDUALPS Instrukcja

14 Stycznia 2025

StarTech.com ARMBARTRIO Instrukcja

14 Stycznia 2025

StarTech.com ARMCBCL Instrukcja

14 Stycznia 2025

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

B-tech BT9340-FM Instrukcja

15 Stycznia 2025

Vogel's FM1622 Instrukcja

15 Stycznia 2025

NeoMounts DS45-430BL16 Instrukcja

14 Stycznia 2025

NeoMounts DS42-430BL14 Instrukcja

14 Stycznia 2025

NeoMounts NS-WMB300PBLACK Instrukcja

14 Stycznia 2025

Manhattan 424868 Instrukcja

14 Stycznia 2025

Manhattan 424820 Instrukcja

14 Stycznia 2025

Vogel's RISE 5205 Instrukcja

14 Stycznia 2025

Digitus DA-90364 Instrukcja

14 Stycznia 2025

Digitus DA-90437 Instrukcja

14 Stycznia 2025