Instrukcja obsługi StarTech.com LANTESTPRO

StarTech.com Kable do komputerów PC i urządzeń peryferyjnych LANTESTPRO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com LANTESTPRO (2 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Specifications
1. LCD Display: 2 lines by 12 characters with LED back light
2. Connectors: (2) RJ-45 (8P8C) jack with shield
3. Controls keys (3): and buttons.MODE/SEL, ESC, ENTER
4. Power: (1) 9V dry cell battery.
5. Size: 15.0(H) x 6.5(W) x 3.5(D) cm.
6. Weight: 180g
Cable Types
1. Unshielded Twisted Pair (UTP 100 , Cat 3, 4 & 5)Ω
2. Foil screened Twisted Pair (FTP 100 and 120 , Cat 3, 4 & 5)Ω Ω
3. Shielded Twisted Pair (STP 150 IBM Type 1 & 6)Ω
4. RG-58 Coaxial cable (LCT-400 ONLY)
Cable Locator
Cable location may be accomplished by using multiple LCT-T
terminators. The LCT-T terminators incorporate factory set I.D.
numbers and are available in IDs from 1 to 16.
LAN Cable Tester
User’s Guide Part#: LANTESTPRO
1 2 3 4 5 6 7 8
W G G W O BL W BL O W BR BR
1 2 3 4 5 6 7 8
W O O W G BL W BL O W BR BR
1 2 3 4 5 6
W G W O BL W BL O G
1 2 3 4 5 6 7 8
W BL BL W O O
1 2 3 4 5 6 7 8
W O BL W BL O
1 2 3 4 5 6 7 8
W BL BL W O O
Pair 1
Pair 2
Pair 4Pair 3
Pair 1
Pair 2
Pair 1
Pair 2
Pair 3
Pair 1
Pair 3
Pair 4Pair 2
Pair 2
Pair 1
Pair 1 Pair 2
T568A T568B
USOC 10BASE-T
Token Ring TP-PMD
Recognized
Wiring Schemes
1. 10(100)Base-T
2. Token Ring
3. TP-PMD
4. AT&T 258A
5. EIA/TIA-568A/B
6. USOC
7. 10(100)Base/HUB
8. BNC/10Base-2
9. 4 User Defined
Features
1. Hand-held and easy to operate.
2. Easy to read LCD display, with back light.
3. Easy to diagnose RJ-45 cables (and BNC types with LCT-400)
with preset wiring schemes.
4. Easy to read cable status, verify cable continuity: open, short,
and mismatches.
5. Scan pin assignment.
6. Automatic cable identification. (Cable type search.)
7. Standard pin configurations and 4 user defined cable wirings
memorized in CPU.
8. Can save user defined cable directly after testing.
9. Test for both shielded and unshielded cable types.
10. Review the captured pin assignment and failure status.
11. Maximum testing length is up to 3000 feet.
12 Identify and trace the other end’s ID. (With up to 16 individual
ID LCT-T)
13. BLow battery indicator.
14. Automatic power-off function.
Automatic Power Saving Features
The LANTESTPRO has built in power management features intended to extend battery life. By far, the LCD back light is the most power-
hungry component in the LANTESTPRO. Use of the LCD back light should therefore be limited to low ambient light applications. The back
light may be toggled ON/OFF by simultaneously pressing the MODE/SEL and ESC function keys. If there is no further menu selection or
function testing within 30 seconds, the back light will be automatically extinguished. Additional power management functions include both a
“sleep” mode and an auto “power off” mode. If there is no key activity for 3 minutes, the unit will automatically enter “sleep” mode. All
interface circuitry and the LCD display will be powered down. In this mode the unit draws very little power. Presing any key will cause the
unit to “wake up” to a full functioning state. However, if there is no key activity for 10 minutes, the unit will automatically “power off”. To
recover from the “power off” mode, the unit must have its power switch cycled OFF and then ON. In the “power off” mode the power usage
remains low. This feature is especially useful if the unit is inadvertently left powered on. The battery should be replaced when the battery low
icon on the LCD display becomes visible during normal use of the LANTESTPRO. Additionally, if a low battery is swapped within 1 minute
with a new one, the user defined memory contents will be retained. Just remember to turn the unit OFF before swapping the battery.
Operation
1. Connection: The LANTESTPRO is capable of testing cables in any one of four modes.
LAN CABLE TE STER
LAN CABL E TESTER
LAN CABL E TESTER
LAN CABLE TESTER
Terminator
LAN CABLE TES TER
Terminator
1. Local Test mode
is accomplished by
connecting both
ends of the cable
being tested to the
LANTESTPRO’s
OUT and
LOOPBACK IN
ports. Local unit
displays an ID
equal to zero.
2. Remote Test mode
uses 2 LANTESTPRO
units, with the cable
connected between
on unit’s OUT and
the other unit’s
LOOPBACK IN
ports. Remote unit
displays an ID equal
to zero.
3. Terminator Loopback mode uses the
supplied terminator ID block connected
at the remote end of the cable, while the
other end of the cable is connected to the
LANTESTPRO’s OUT port.
4. 10BASE-2 Test uses the supplied RJ-
45 to BNC. The adapters may both be
placed in the LANTESTPRO’s RJ-45
jacks for local test or on may be placed
at the LANTESTPRO’s OUT port while
the other is placed on the terminator
for Terminator Loopback testing.
2. Turn power switch on: Following the initial powering on of the LANTESTPRO, the unit will display the startup logo with back light for 3
seconds, then will display the top menu for “cable test”.
CTC UNION฀
LCT ..v1.0
MODE SEL:฀
cable test
Battery
Low Icon
o 12345678G฀
i 36145278 Pin Out
100BASE/HUB฀
UTP id:1
Type
UTP, FTP,
or COAX Terminator
ID No.
3. LANTESTPRO startup menu 4. LANTESTPRO test menu
5. Press “ENTER” to test the cable. 6. Resuls Displayed
7. Use MODE/SEL to toggle between cable pin out screen and result display, press ESC back test menu.
Cable Testing
During any mode of cable testing, the first screen display will show the top line out and bottom line in of connections 1 through 8 plus G
(shield) as they are scanned. Following this screen page will be the cable indentification. If at least one wire pair is not connected, the display
will read “NO CONNECT”. A shorted cable will read “SHORT”. A question mark in the pin out display indicates a short. An unknown is not
the standard known pin outs or in the User Defined memory.
User Defined Cable
The User Define function allows you to describe your own custom cable pin out which will be entered into the cable indentification database
and saved in the CPU memory. This custom pin out will remain available as long as a fresh battery is in the unit. Two methods are available
for defining a cable. The first method is manual entry, while the second uses an “UNKNOWN” cable as the pin out source. First the manual
method. From the very top of the LANTESTPRO menu (just after power on is completed) select the USER DEF menu by pressing the
MODE/SEL button (step 1 to 2). The MODE/SEL button will now move the cursor to select one of four user memory locations (setp 3). Press
ENTER to select the memory location that the cursor is on. The define display will show (step 4).
MODE SEL:฀
cable test
MODE SEL:฀
user defined
USER DEF.฀
# 1/ /3/4
2
o 12345678G฀
i
empty
1. LANTESTPRO test menu 2. LANTESTPRO User Defined menu
3. LANTESTPRO User Defined display (4 locations) 4. LANTESTPRO Define cable display
MODE/SEL ENTER
MODE/SEL
to location 1~4
the ENTER
Use the ENTER key to set digits 1 to 8, G or blank (not connected), then press MODE/SEL to move to the next space. When completed press
ESC. (step no. 5 to 6)
o 12345678G฀
i 34126578
defined
pin out
SAVE TO USER฀
DEF. #2 ?
UNKNOWN DEF.฀
UTP id:1
SAVE TO USER฀
DEF. ?
USER DEF.฀
# 1/2/3/4
5. LANTESTPRO defined pin out 6. LANTESTPRO Save to User Defined Confirmation display
ESC
MODE SEL:฀
cable test
MODE SEL:฀
cable test
To save your definition, press ENTER. To exit without saving, press ESC. The alternate method is to save the “Unknown” type.
Select the Location with MODE/SEL and then press ENTER to save. Press ESC at anytime to exit.
Cable Fault Identification Examples:
In the above example, Pin 1 and Pin 2 were found to be shorted.
In the second example, if a least one pair of the wires is not connected, the test result will show as “NO CONNECT”.
o 12345678G฀
i 11345678
CABLE SHORT฀
id:1
o 12345678G฀
i
NO CONNECT
ENTER
ENTER

Specyfikacje produktu

Marka: StarTech.com
Kategoria: Kable do komputerów PC i urządzeń peryferyjnych
Model: LANTESTPRO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com LANTESTPRO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kable do komputerów PC i urządzeń peryferyjnych StarTech.com

StarTech.com

StarTech.com 1P1FFCN-USB-SERIAL Instrukcja

29 Grudnia 2024
StarTech.com

StarTech.com USBAUB1BK Instrukcja

28 Grudnia 2024
StarTech.com

StarTech.com LANTESTPRO Instrukcja

28 Grudnia 2024
StarTech.com

StarTech.com USBAUB1MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com USBAUB3MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com USBAUB2MBK Instrukcja

9 Października 2024
StarTech.com

StarTech.com CRJ4550PK Instrukcja

9 Października 2024
StarTech.com

StarTech.com CRJ45C6STR50 Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST8CU824 Instrukcja

9 Października 2024
StarTech.com

StarTech.com RJ45SPLITTER Instrukcja

9 Października 2024

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych

Pioneer

Pioneer CD-SVW-UAR.006AE Instrukcja

4 Stycznia 2025
Roline

Roline 11.04.5681 Instrukcja

2 Stycznia 2025
Roline

Roline 14.01.3416 Instrukcja

2 Stycznia 2025
Roline

Roline 11.09.4276 Instrukcja

2 Stycznia 2025
UNITEK

UNITEK V1423A Instrukcja

2 Stycznia 2025
ATen

ATen KA7570 Instrukcja

1 Stycznia 2025
Tripp Lite

Tripp Lite N252-048-1U Instrukcja

30 Grudnia 2025
Yamaha

Yamaha CBL-L10AC Instrukcja

29 Grudnia 2024
Icy Box

Icy Box IB-CB009-1 Instrukcja

29 Grudnia 2024
Digitus

Digitus AK-300100-010-S Instrukcja

29 Grudnia 2024