Instrukcja obsługi StarTech.com CTK20PCEDRIVE
StarTech.com
Maszyna do śrub
CTK20PCEDRIVE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com CTK20PCEDRIVE (2 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: January 14, 2021
7
611
9*CTK55PCEDRIVE
1
5
3
4
2
*CTK55PCEDRIVE
Product Diagram (CTKxxPCEDRIVE)
Package Contents
Bit Extender, Storage Tube, and Electric Screwdriver
Port Function
1Case
• Holds the , , and the Bits Demagnetizing Tool Storage
Tube Electric Screwdriver containing the
• CTK20PCEDRIVE features a Soft-shell Case
2AAA Batteries x 2 • 3V DC AAA Batteries
20/55-bit Precision Electric Screwdriver with Alkaline Battery
3Demagnetizing Tool
• Magnetize Bits
• Move the around the inside of the square Bit
portion of the Demagnetizing Tool
• Demagnetize Bits
• Move the around the inside of the U-shaped Bit
portion of the Demagnetizing Tool
4
20 Bits
(CTK20PCEDRIVE)
55 Bits
(CTK55PCEDRIVE)
CTK20PCEDRIVE:
H4X28 x 20 Pieces
Philips (PH000, PH00, PH0, PH1)
Slot/Flat (SL1.0, SL1.5, SL2.0)
TORX (T5)
TORX Security (T6, T8)
Hexagonal (H2.5, H3.0)
Pentalobe (P2(0.8), P5(1.2), P6(1.5))
Spanner (U3.0)
TriWing (Y0.6, Y2.5)
Triangle (Δ3.0)
Square/Robertson (S0)
CTK55PCEDRIVE:
H4X28 x 50 Pieces
Philips (PH0000, PH000, PH00, PH0, PH1, PH2)
Hexagonal (H0.7, H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5,
H4.0)
Slot/Flat (SL1.0, SL1.5, SL2.0, SL2.5, SL3.0, SL3.5)
TORX (T2, T3, T4, T5)
TORX Security (T6, T7, T8, T9, T10, T15, T20)
Triangle (Δ2.0, Δ2.3, Δ2.5, Δ3.0)
TriWing (Y0.6, Y1.0, Y2.0, Y2.5, Y3.0)
Spanner (U2.0, U2.6, U3.0)
Pentalobe (P2(0.8), P5(1.2), P6(1.5))
Square/Robertson (S0, S1, S2)
H4X45 x 5 Micro Pieces
Philips (PH0, PH2)
Hexagonal (H2.0, H2.5)
Slot/Flat (SL2.5)
5
Magnetic Work Pad
(CTK55PCEDRIVE
only)
• Holds magnetized and Bits Screws
6
Bit Extender
(CTK55PCEDRIVE
only)
• Insert into the to extend the BitsElectric Screwdriver
7
Storage Tube
(CTK55PCEDRIVE
only)
• Storage Tube Electric Screwdriver for the
8
10
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
TORX (T2, T3, T4, T5)
TORX Security bits (T6, T7, T8, T9, T10, T15, T20)
Triangle (Δ2.0, Δ2.3, Δ2.5, Δ3.0)
TriWing (Y0.6, Y1.0, Y2.0, Y2.5, Y3.0)
Spanner (U2.0, U2.6, U3.0)
Pentalobe (P2(0.8), P5(1.2), P6(1.5))
Square/Robertson (S0, S1, S2)
H4X45 x 5 Micro Pieces
Philips (PH0, PH2)
Hexagonal (H2.0, H2.5)
Slot/Flat (SL2.5)
Requirements
For the latest requirements and to view the full manual, please visit:
www.startech.com/CTK20PCEDRIVE www.startech.com/CTK55PCEDRIVE or
• Replacement AAA Batteries x 2
• 3V DC
8Electric Screwdriver
• Insert the desired into the end of the Bit Electric
Screwdriver Forward Reverse Buttonand press the or
to control the direction of a Screw
• 0.25-0.35 N.m torque output
9Forward Button • Press to drive Screws
10 Reverse Button • Press to remove Screws
11 End Cap • Remove to insert/remove the AAA Batteries
Package Contents
• Precision Screwdriver x 1
• Magnetic Work Pad (CTK55PCEDRIVE only) x 1
• Demagnetizer x 1
• AAA Batteries x 2
• 20/55 Piece Bit Set (CTK20PCEDRIVE/CTK55PCEDRIVE) x 1
• Quick-Start Guide x 1
Bit Images Bit Type
H4X28 x 50 Pieces
Philips (PH0000, PH000, PH00, PH0, PH1, PH2)
Hexagonal (H0.7, H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5, H4.0
Slot/Flat (SL1.0, SL1.5, SL2.0, SL2.5, SL3.0, SL3.5)
Specyfikacje produktu
| Marka: | StarTech.com |
| Kategoria: | Maszyna do śrub |
| Model: | CTK20PCEDRIVE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z StarTech.com CTK20PCEDRIVE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub StarTech.com
22 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Silverline
- Maszyna do śrub Makita
- Maszyna do śrub Ozito
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Hilti
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Dremel
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Fein
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub HiKOKI
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Skil
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Cleco
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
Najnowsze instrukcje dla Maszyna do śrub
12 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024