Instrukcja obsługi StarTech.com 410VDSLEXT2

StarTech.com wzmacniacz wifi 410VDSLEXT2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com 410VDSLEXT2 (32 stron) w kategorii wzmacniacz wifi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

Manual Revision: 12/18/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

410VDSLEXT2

1 Port to 4 Port 10/100Mbps VDSL2 Ethernet Extender

Kit over Single Pair Wire – 1 km

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction ............................................................................................ 1

Packaging Contents 1 .................................................................................................................................

System Requirements 1 ..............................................................................................................................

Product Overview ..................................................................................2

Installation .............................................................................................4

Hardware Installation 4 .............................................................................................................................

DIP Switch Settings - Transmitter ........................................................5

Conguration .......................................................................................... 7

Web Interface 7 .............................................................................................................................................

Welcome Screen 7 ........................................................................................................................................

System ........................................................................................................................................................... 8

Port Management 11 .....................................................................................................................................

VLAN 14 ..............................................................................................................................................................

QoS Setting 16 .................................................................................................................................................

Security Filter 19 ..............................................................................................................................................

VDSL Setting 20 ...............................................................................................................................................

Connector Architecture 22 .........................................................................................................................

Resetting Your Device .............................................................................................................................. 23

Appendix 23 ......................................................................................................................................................

Technical Support ..................................................................................25

Warranty Information ............................................................................ 25

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	wzmacniacz wifi
Model:	410VDSLEXT2
Kolor produktu:	Czarny
Materiał obudowy:	Plastik
Napięcie wejściowe AC:	100-240 V
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Certyfikaty:	CE, FCC
Zasilacz sieciowy:	Tak
Standardy komunikacyjne:	IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Napięcie operacyjne:	12 V
Przewody:	LAN (RJ-45), Phone (RJ-11)
Szerokość odbiornika:	132 mm
Głębokość odbiornika:	180 mm
Waga odbiornika:	37 mm
Waga wraz z opakowaniem:	1100 g
Model:	Nadajnik i odbiornik sieci
Prąd wyjściowy:	1 A
Prąd wejściowy:	0.36 A
Typ wtyczki zasilającej:	Typ M
Maksymalny dystans transferu:	1000 m
Zgodny z Jumbo Frames:	Nie
Realna szybkość przesyłania danych:	200 Mbit/s
Auto-Negocjacja:	Tak
Automatyczne MDIX IEEE:	Tak
Waga transmitera:	90 g
Tagowanie VLAN:	Tak
Transmisja dwukierunkowa duplex:	Pełny
Szerokość nadajnika:	72 mm
Głębokość nadajnika:	95 mm
Wysokość nadajnika:	22 mm
Zużycie prądu (nadajnik) (max):	4.5 W
Zużycie prądu (odbiornik) (max):	5 W
Wilgotność względna podczas pracy (odbiornik):	10 - 95 %
Wilgotność względna podczas pracy (nadajnik):	10 - 90 %
Temperatura podczas pracy (odbiornik):	0 - 45 °C
Liczba portów RJ-45 (nadajnik):	2
Liczba portów RJ-45 (odbiornik):	4
Chipset (nadajnik):	Metanoia MT3201, MT2201GL-B1
Chipset (odbiornik):	Metanoia MT2301GL-A1, MT3301GN-A3
MTBF (nadajnik):	73519 h
MTBF (odbiornik):	66436 h
Liczba portów RJ-11 (odbiornik):	1
Temperatura podczas pracy (nadajnik):	0 - 50 °C
Temperatura przechowywania (nadajnik):	-10 - 70 °C
Temperatura przechowywania (odbiornik):	-20 - 70 °C