Instrukcja obsługi Star Micronics mC-Label3
Star Micronics
drukarka etykiet
mC-Label3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Star Micronics mC-Label3 (3 stron) w kategorii drukarka etykiet. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
Star Windows Software
The Windows driver is included in the Star Windows Software.
The Star Windows Software can be used to congure the printer
settings and perform an operation test.
Download [ Star Windows Software ].
Extract the downloaded software and execute "Setup.exe".
Follow the wizard instructions and complete software installa-
tion.
Windows
Star Quick Setup Utility
For a wired LAN connection, use the tablet that is connected to
the same network as the mC-Label3.
Install [ Star Quick Setup Utility ].
Open the configuration utility, and select [ Start Guide (Initial
Settings)] - [Search Printer].
Follow the instructions of the utility to connect and set up a tab-
let.
iOS/Android
3
Preparing/setting up the conguration app
Conguration app
download site
●Driver download site for Mac / Linux environment. (https://www.star-m.jp/supportsite-wsw.html)
You can complete the settings up to start using the printer from a tablet or PC by using
the conguration app. Scan the QR code on the right side or search the app to access the
download site.
Easy Setup Guide
mC-Label3 online manual
This document explains the setup procedure for the mC-Label3. For
further instructions, please refer to the mC-Label3 online manual. Please
read the instructions before using the printer. You can also see FAQ from
the QR code on the inside of the printer.
Introduction
Easy Setup
GuideLAN Cable
MCL32CI
USB Cables Safety
Instructions
If contents are missing or damaged, please contact the reseller that sold you the printer.
What's Included
Power CableAC Adapter
This Sheet
1
Connecting a Tablet or PC
Connect an appropriate cable to the connector on the printer according to
your operating environment.
USB-C ®
Android, Windows
You will need:
USB cable included with the printer.(C-C)
Windows
You will need:
USB cable included with the printer.(C-A)
Communication and Recharge
2
1
Wired LAN
You will need:
LAN cable included with the printer.
Please remove the protective inside the printer and the silica gel on the part
bottom of the printer.
Before Use
2
1
3
4
5
Securely plug the power cable (for the AC adapter) fully into the AC
adapter inlet ❶.
Connect the AC adapter plug to the power connector of the printer.
Be sure that it is oriented correctly ❷.
Insert the power cable plug into the electrical outlet ❸.
Press the power switch on the side of the printer ❹.
During startup, the lighting and blinking pattern of the Power LED
changes.
Conrm that the Power LED blinks red ❺.
2
Turning ON the Main Unit Power
For the owners of other companies’ trademarks mentioned in this document, see Trademarks in our website (https://www.star-m.jp/eng/trademarks.html).
Copyright 2023 Star Micronics Co., Ltd.
FAQ
80878872
2 1
Plug for the mC-Label3
Communication
Plug for the mC-Label3
Cleaning the printer periodically keeps the print quality and prevents dirt from adhering to the
printed paper roll.
The information LED on the front of the printer noties you when it is time to clean the printer.
For details about how to clean the printer, refer to the Online Manual by scanning the QR code
inside of the printer.
The "platen unit" and "cutter unit" inside the printer are consumable parts that need to be re-
placed depending on the amount of use.
Each of them can be replaced without using tools (toolless).
What Star Quick Setup Utility Can Do
FREE services are available if you register mC-Label3 with Star Micronics
Cloud Services. Label Builder
and more
Connect the printer to the internet.
Refer to "Wired LAN" in Step 1 "Connecting a Tablet or PC".
Scan the QR code from a smartphone or tablet to access the registration
site for "Star Micronics Cloud Services".
Follow the procedures to register the printer with "Star Micronics Cloud
Services" to start using the services.
Registration site
Service site
Recommended Star Micronics Cloud Services for mC-Lable3
●
Device Monitor
You can check the status of the printer and set email notications for parts cleaning and replacement.
●
Label Builder
It allows anyone to create label data intuitively.
The created data can be directly printed or registered to One Touch Label.
Sign Up for Star Micronics Cloud Services
● Initial settings (We recommend using Utility)
By using Utility, you will be guided through the printer settings that are suitable for the operat-
ing situation with animations.
● One Touch Label settings
You can register images such as store logos or others to the printer. After registration, you can
easily print the registered original image on labels by simply pressing the Multi-function but-
ton on the front of the printer.
● Flexible connection settings
You can congure our original network connections such as StedyLAN or TetherLAN.
The printer that is connected via the LAN cable provides a stable wired net-
work to mobile devices via a USB cable.
You can connect to the internet anywhere by using a device that has mobile
communication.
Periodic Maintenance
Multi-function button
LED
Information LED
● Open the printer cover
Pull the cover opening lever toward you ❶ and open the printer cov-
er ❷.
1
2
3
4
● Adjusting the paper guide
While pinching the paper guide lever ❸, slide it to the left and right
sides ❹. Adjust the guide to the position of the paper width to be
used by referring to the scale.
■ Types of paper roll that can be used
● Installing the paper roll
Pay attention to the orientation of the paper roll to insert it in the direction that is indicated by the arrow ❺ so that the paper guide
shafts (on the left and right) are inserted into the paper roll tube.
● Close the cover
Pull out the edge of the paper roll horizontally ❻. While keeping the paper roll level, close the printer cover ❼.
For a linerless label, be careful that the adhesive side does not stick to the printer.
Remove the paper roll that exceeds the printer cover ❽.
5
When using a linerless label (without using black marks), now the paper loading is completed.
If you use other paper, you need to continue to set up. For details, refer to the Online Manual.
The following instructions are explained in detail in the conguration app that is mentioned in "3 Preparing/setting up the conguration
app".
Be careful that the paper roll does not fall out of the the paper guide shafts. If the paper roll falls into the printer, it is detected as a
paper position error and you cannot print.
How to install the paper roll
6
7
8
Specyfikacje produktu
| Marka: | Star Micronics |
| Kategoria: | drukarka etykiet |
| Model: | mC-Label3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Star Micronics mC-Label3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka etykiet Star Micronics
2 Października 2024
21 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
Instrukcje drukarka etykiet
- drukarka etykiet Epson
- drukarka etykiet Toshiba
- drukarka etykiet Casio
- drukarka etykiet Citizen
- drukarka etykiet Brother
- drukarka etykiet Honeywell
- drukarka etykiet Primera
- drukarka etykiet Godex
- drukarka etykiet Olivetti
- drukarka etykiet Zebra
- drukarka etykiet Seiko
- drukarka etykiet Renkforce
- drukarka etykiet Dymo
- drukarka etykiet Panduit
- drukarka etykiet Intermec
- drukarka etykiet Bixolon
- drukarka etykiet Datamax O'Neil
- drukarka etykiet TSC
- drukarka etykiet Brady
- drukarka etykiet Argox
- drukarka etykiet Leitz
- drukarka etykiet POSline
- drukarka etykiet Kroy
- drukarka etykiet Metapace
- drukarka etykiet Datacard
- drukarka etykiet Dascom
- drukarka etykiet DULA
- drukarka etykiet EC Line
- drukarka etykiet Tach-It
- drukarka etykiet Colop
- drukarka etykiet Qoltec
- drukarka etykiet SATO
- drukarka etykiet SII
- drukarka etykiet Start International
- drukarka etykiet Custom
Najnowsze instrukcje dla drukarka etykiet
15 Października 2024
13 Października 2024
11 Października 2024
10 Października 2024
8 Października 2024
8 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024