Instrukcja obsługi Stanley TLM50

Stanley wskaźnik laserowy TLM50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stanley TLM50 (103 stron) w kategorii wskaźnik laserowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/103
GB
NL
GR
I
FIN
HU
BG
LV
D
DK
CZ
E
NO
SK
RO
LT
F
SE
RU
PT
PL
SI
EE
TR
HR
Please read these instructions before operating the product
www.StanleyTools.com
DOC100270398
STHT1-77409
User Manual
A
1
2
3
B
1
2
C
AAA
D
1
2E
6.21ft
6.17ft
1
2
3
A
1
2
3
B
1
2
C
AAA
D
1
2
Figures
E
6.21ft
6.17ft
1
2
3
2
GB
Contents
• User Safety
• Battery Safety
• Setup (Load Batteries)
• Operation
• Specications
• Warranty
• Error Codes
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety Instructions and
Product Manual before using this product. The
person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
WARNING:
The following label information is placed on
your laser tool to inform you of the laser class
for your convenience and safety.
The STHT1-77409 tool emit a visible laser beam, as
shown in Figure A. The laser beam emitted is Laser
Class 2 per IEC 60825-1 and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
WARNING:
While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time period may be
hazardous to your eyes. Do not look into the
beam with optical aids.
WARNING:
To reduce the risk of injury, user
must read the Product User manual, Laser
Safety, and Battery Safety manuals.
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Stanley Black & Decker, Slough, Bershire SL1 3YD, UK
herewith declares that the product STHT1-77409 is in
compliance with the essential requirements and all
other provisions of Directive 1999/5/EC. Please contact
Stanley Black & Decker for DoC.
Battery Safety
WARNING: Batteries. can explode or leak and
can cause injury or re. To reduce the risk:
ALWAYS follow all instructions and warnings
on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace
all of them at the same time with new
batteries of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in re.
ALWAYS keep batteries out of reach of
children.
ALWAYS remove batteries if the device will
not be used for several months.
NOTE: Ensure that the recommended
batteries are used.
NOTE: Ensure the batteries are inserted in the
correct manner, with the correct polarity.
Setup (Load Batteries)
1. Locate the battery compartment latch on the back
of the tool (Figure B #2).
Contents
• User Safety
• Battery Safety
• Setup (Load Batteries)
• Operation
• Specications
• Warranty
• Error Codes
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety Instructions and
Product Manual before using this product. The
person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
WARNING:
The following label information is placed on
your laser tool to inform you of the laser class
for your convenience and safety.
The STHT1-77409 tool emit a visible laser beam, as
shown in Figure A. The laser beam emitted is Laser
Class 2 per IEC 60825-1 and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
WARNING:
While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time period may be
hazardous to your eyes. Do not look into the
beam with optical aids.
WARNING:
To reduce the risk of injury, user
must read the Product User manual, Laser
Safety, and Battery Safety manuals.
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Stanley Black & Decker, Slough, Bershire SL1 3YD, UK
herewith declares that the product STHT1-77409 is in
compliance with the essential requirements and all
other provisions of Directive 1999/5/EC. Please contact
Stanley Black & Decker for DoC.
Battery Safety
WARNING: Batteries. can explode or leak and
can cause injury or re. To reduce the risk:
ALWAYS follow all instructions and warnings
on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace
all of them at the same time with new
batteries of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in re.
ALWAYS keep batteries out of reach of
children.
ALWAYS remove batteries if the device will
not be used for several months.
NOTE: Ensure that the recommended
batteries are used.
NOTE: Ensure the batteries are inserted in the
correct manner, with the correct polarity.
Setup (Load Batteries)
1. Locate the battery compartment latch on the back
of the tool (Figure B #2).
3

Specyfikacje produktu

Marka: Stanley
Kategoria: wskaźnik laserowy
Model: TLM50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stanley TLM50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje wskaźnik laserowy Stanley

Stanley

Stanley TLM65 Instrukcja

3 Września 2024
Stanley

Stanley FMHT77585 Instrukcja

31 Sierpnia 2024
Stanley

Stanley Cubix STHT77498-1 Instrukcja

24 Sierpnia 2024
Stanley

Stanley FMHT77447 Instrukcja

7 Sierpnia 2024
Stanley

Stanley TLM50 Instrukcja

4 Lipca 2024

Instrukcje wskaźnik laserowy

Najnowsze instrukcje dla wskaźnik laserowy

August

August LP104R Instrukcja

2 Stycznia 2025
Vortex

Vortex Ranger 1800 Instrukcja

31 Grudnia 2025
DeWalt

DeWalt DCE088G Instrukcja

30 Grudnia 2025
DeWalt

DeWalt DE0881 Instrukcja

6 Grudnia 2024
DeWalt

DeWalt DW071 Instrukcja

9 Października 2024
DeWalt

DeWalt DW074 Instrukcja

9 Października 2024
DeWalt

DeWalt DW087K Instrukcja

7 Października 2024
DeWalt

DeWalt DE0892G Instrukcja

7 Października 2024
DeWalt

DeWalt DW078 Instrukcja

7 Października 2024
DeWalt

DeWalt DW08302CG Instrukcja

7 Października 2024