Instrukcja obsługi Stanley STHT0-77365

Stanley termometr STHT0-77365

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stanley STHT0-77365 (128 stron) w kategorii termometr. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/128
OFF SET
F
C
OFF
1 F 5 F 10 F
0.5 C 3 C 5.5 C
2
User Manual
GB
Distance to spot siz e = 8:1
Distance
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
Measurement
Indicator
Temperture
Dierence
Display
3 cm @ 24cm 2 cm @ 16 cm 1 cm @ 8 cm
Distance
Distance to spot size = 8:1
Units/Set
Button
Select/O
Button
Laser
Emitter
Infrared
Lense
Trigger
Battery
Cover
Units
Threshold
Indicator
Reference
Temperature
Scanned
Temperature
Battery
Level
OFF
SET
F
C
OFF
1F 5F 10F
0.5C 3C 5.5C
STANLEY® IR Thermometer
The STANLEY IR Thermometer is a non-contact
temperature measuring thermometer. It utilizes
infrared technology and a color changing display
for quick, intuitive feedback. The STANLEY
IR Thermometer can be used to measure the
surface temperature of an object or ¿nd
leaks along walls, molding, ductwork and more.
USER SAFETY
WARNING: Read and understand all
instructions. Failure to follow all instructions
listed below may result in personal injury:
• Laser Radiation, avoid direct DANGER:
eye exposure, serious eye injury can result.
• Use optical tools such as DO NOT
a telescope or transit to view the laser beam.
• position the laser so unintentional ALWAYS
eye contact will be avoided.
• operate the laser around children or DO NOT
allow children to operate the laser.
• DO NOT disassemble. Modifying the product
in any way can increase the risk of laser
radiation.
• WARNING: Use of controls or
adjustments or performance of procedures
other than those s
result in hazardous laser radiation exposure.
• operate in explosive atmospheres, DO NOT
such as in the pres
gases, or dust.
• ALWAYS use only the ba
for use with this product. Use of any other
batteries may creat
• store idle product out of reach of ALWAYS
children and other untrained persons. Lasers
may be dangerous in the hands of untrained
users.
• use only accessories that are ALWAYS
recommended by the manufacturer for you
model. Accessories that may be suitable for
one laser may create a risk of injury when
used on another laser.
• remove or deface warning labels. DO NOT
Removing labels increases risk of laser
radiation.
• disassemble, service or repair this DO NOT
product. Repairs pe
personnel could result in serious injury.
• direct the laser beam toward aircraft DO NOT
or moving vehicles.
• DO NOT project laser b
surface.
• splash or immerse the unit in water. DO NOT
• turn o the product when not in ALWAYS
use.
• ALWAYS ensure battery is inserted in the
correct manner, with the correct polarity.
3
• intentionally short any battery NEVER
terminals.
• attempt to charge alkaline DO NOT
batteries.
• DO NOT dispose of batteries in ¿re.
• remove the battery if storing the ALWAYS
unit for over a month.
• dispose of this product with DO NOT
household waste.
• ALWAYS check local codes and properly
dispose of used batteries.
• in line with local PLEASE RECYCLE
provisions for the collection and disposal of
electrical and electronic waste.
WARNING:
• Carefully read the User Safety and
Operating Instructions before
using this product. The person responsible
for the instrument must ensure that all
users understand and adhere to these
instructions.
WARNING:
• The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety.
OPERATING INSTRUCTIONS
BATTERY
Open the battery door on the handle of unit
and connect 2 AAA (1.5 V) batteries, ensuring
polarity is correct per the indication on the
inside of case. Replace battery door. It is
recommended to replace the batteries with
new batteries when battery indicator shows .
USAGE
1. Point the IR Thermometer at the object
to be measured, pull and hold the
trigger. When the IR thermometer is in
measurement mode the LCD backlight
will illuminate and the laser will be on, the
measurement indicator icon will “SCAN”
also be displayed on the LCD.
• When the trigger is released 3 audible
beeps will sound and the laser will shut o;
the last temperature reading will remain
on the LCD. After 15 seconds the LCD
backlight will turn o and after 1 minute the
IR Thermometer will turn o.
2. When the IR Thermometer is in the “ON”
state (trigger is not pulled), pressing the
SET
ºC/ºF
button will select the desired unit of
measure: C° or F°.
3. When the IR Thermometer is in the “ON”
state (trigger is not pulled), pressing and
holding the
OFF
button for about 3 seconds
will turn the unit o.
4. When the IR Thermometer is in the
measurement mode (trigger is pulled and
held), pressing the
SET
ºC/ºF
button will set the
reference temperature.
5. Press the
OFF
button to select the desired
temperature threshold (0.5°C/1°F, 3°C/5°F,
or 5.5°C/10°F). The icon indicates your
current setting.
• To disable the threshold feature, press the
OFF
button until the icon is over the
“OFF” mark.
6. Once a reference temperature and
temperature threshold are set the unit
can be used to scan areas for changes in
temperature. While in measurement mode
the backlight will be green and “NORMAL”

Specyfikacje produktu

Marka: Stanley
Kategoria: termometr
Model: STHT0-77365

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stanley STHT0-77365, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termometr Stanley

Stanley

Stanley STHT0-77365 Instrukcja

4 Września 2024

Instrukcje termometr

Najnowsze instrukcje dla termometr

Auriol

Auriol H14269 Instrukcja

15 Października 2024
Medel

Medel Express Thermometer Instrukcja

9 Października 2024
Medel

Medel ECOtemp Instrukcja

9 Października 2024
Medel

Medel No Contact Plus Instrukcja

9 Października 2024
Medel

Medel Flexo Instrukcja

9 Października 2024
La Crosse Technology

La Crosse Technology 308-1409TH-11 Instrukcja

8 Października 2024
La Crosse Technology

La Crosse Technology 314-519 Instrukcja

8 Października 2024
La Crosse Technology

La Crosse Technology M71800 Instrukcja

8 Października 2024
Owon

Owon TI300 Instrukcja

8 Października 2024
Innoliving

Innoliving INMD-DMT-437 Instrukcja

8 Października 2024