Instrukcja obsługi Stairville 64 Cob RGBW 60W
Stairville
światło
64 Cob RGBW 60W
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stairville 64 Cob RGBW 60W (56 stron) w kategorii światło. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/56
LED Par 36 COB RGBW 12W,
LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W,
LED Par 56 COB RGBW 30W
LED PAR
user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
27.05.2020, ID: 333906, ... (V3)
Table of contents
1 General information 5.................................................................................................................................
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions 10..................................................................................................................................
3 Features 16.......................................................................................................................................................
4 Installation 17..................................................................................................................................................
5 Starting up 21..................................................................................................................................................
6 Connections and operating elements 24...........................................................................................
7 Operating 26....................................................................................................................................................
7.1 Starting up the device.................................................................................................................... 26
7.2 Main menu.......................................................................................................................................... 26
7.3 Menu overview................................................................................................................................. 33
7.4 Functions in 4-channel DMX mode........................................................................................... 34
7.5 Functions in 6-channel DMX mode........................................................................................... 34
Table of contents
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
3
7.6 Functions in 8-channel DMX mode........................................................................................... 36
8 Technical 38specications.......................................................................................................................
9 Plug and connection assignments 47..................................................................................................
10 Troubleshooting 48......................................................................................................................................
11 Cleaning 50.......................................................................................................................................................
12 Protecting the environment 51..............................................................................................................
Table of contents
LED PAR
4
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under .www.thomann.de
General information
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
5
1.1 Further information
On our website ( you will lots of further information and details on thewww.thomann.de) nd
following points:
Download This manual is also available as PDF for you to download.le
Keyword search Use the search function in the electronic version to the topics ofnd
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
LED PAR
6
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: control, button.[VOLUME] [Mono]
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: , .‘24ch’ ‘OFF’
1.3 Symbols and signal words
In this section you will an overview of the meaning of symbols and signal words that arend
used in this manual.
Letterings
Displays
General information
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
7
Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General information
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
9
2 Safety instructions
This device is intended for use as an electronic lighting by means of LED technology. Theeect
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with physical, sensorial, and intellectualsucient
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Intended use
Safety instructions
LED PAR
10
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
11
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or If in doubt, seek advice from a registered electrician.re.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
LED PAR
12
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
13
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions in the chapterspecied
‘Technical of this user manual. Avoid heavy temperature specications’ uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature (for example after transport at low outside temperatures).uctuations
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
LED PAR
14
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Safety instructions
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
15
3 Features
Special features of the device:
nOne four-colour chip on-board LED
nStand-alone, master-slave or DMX mode operation
nOperating via buttons and display on the unit
nRobust metal housing
nUniversal two-piece mounting bracket for hanging or standing installation
nSuitable for use in clubs, bars, theatres, exhibitions, etc. or for architectural lighting
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
LED PAR
16
4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
17
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more
than 1.5 m (19.7in).
Provide ventilation.sucient
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
LED PAR
18
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the openings provided on the two-
piece bracket for attaching.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned o.
The safety cable must be attached to the bracket.
Mounting options
Installation
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
19
Please note that this device must not be connected to a dimmer.
Installation
LED PAR
20
5 Starting up
Create all connections while the device is Use the shortest possible high-quality cables foro.
all connections. Take care when running the cables to prevent tripping hazards.
Starting up
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
21
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the DMX device to the input of the second one, and so onrst
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, W).¼
Connections in DMX mode
Starting up
LED PAR
22
When you a group of devices in master/slave mode, the unit will control thecongure rst
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the slave device. Then connect the DMX output of the slave device torst rst
the DMX input of the second slave device and so on.
Connections in master/slave
mode
Starting up
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
23
6 Connections and operating elements
Rear panel
Connections and operating elements
LED PAR
24
1 Power cord
2 Display
3 button[OK]
Conrms a selected value
4, 5 Tasten ,
Increases or decreases the displayed value by one
6 button[M]
Calls up the main menu or a submenu
7 Two-piece bracket for hanging or installation and for securing the safety cable
8 Locking screw for the bracket.
9[DMX IN]
DMX input
10 [DMX OUT]
DMX output
Connections and operating elements
LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W,
LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W
25
Specyfikacje produktu
| Marka: | Stairville |
| Kategoria: | światło |
| Model: | 64 Cob RGBW 60W |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Stairville 64 Cob RGBW 60W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje światło Stairville
17 Września 2024
31 Sierpnia 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
5 Czerwca 2024
Instrukcje światło
- światło Ikea
- światło Samsung
- światło Tesy
- światło Electrolux
- światło Worx
- światło Sanitas
- światło Xiaomi
- światło BeamZ
- światło TP-Link
- światło Milwaukee
- światło Philips
- światło Livoo
- światło SilverCrest
- światło Bosch
- światło JBL
- światło Theben
- światło Crestron
- światło Nedis
- światło American DJ
- światło Black & Decker
- światło Westinghouse
- światło Fenix
- światło August
- światło Niceboy
- światło Hazet
- światło ILive
- światło Blaupunkt
- światło DeWalt
- światło Sigma
- światło Honeywell
- światło Chauvet
- światło Steinel
- światło ArmyTek
- światło Ozito
- światło Kodak
- światło Dyson
- światło Sunnydaze Decor
- światło RYOBI
- światło Godox
- światło Auriol
- światło IFM
- światło Furrion
- światło DEDRA
- światło Hilti
- światło Vimar
- światło V-TAC
- światło Schneider
- światło Ledlenser
- światło Eurolite
- światło NZXT
- światło Emos
- światło Crivit
- światło Osram
- światło Perel
- światło Ansmann
- światło DiO
- światło Velleman
- światło DataVideo
- światło Klarstein
- światło Adviti
- światło Nordlux
- światło Setti+
- światło Showtec
- światło ARRI
- światło Zhiyun
- światło Fluval
- światło Kanlux
- światło GoGen
- światło Brilliant
- światło Genie
- światło Brandson
- światło Hayward
- światło Novy
- światło Omnitronic
- światło Livarno Lux
- światło Elro
- światło Hama
- światło Busch + Müller
- światło Zafferano
- światło Cameo
- światło Goobay
- światło Schwaiger
- światło Elation
- światło GVM
- światło Denver
- światło Blumfeldt
- światło Futurelight
- światło Intellytech
- światło Olight
- światło Klein Tools
- światło Black Diamond
- światło Media-Tech
- światło Martin
- światło Excello
- światło Ikan
- światło Perko
- światło Impact
- światło Monacor
- światło Aputure
- światło HQ Power
- światło Dörr
- światło SLV
- światło Halo
- światło Smartwares
- światło Elgato
- światło Metabo
- światło Adj
- światło AeroLEDS
- światło Waldmann
- światło Gama Sonic
- światło LUPO
- światło Zadro
- światło Reer
- światło InnoGIO
- światło AccuLux
- światło Cotech
- światło Gre
- światło Miomare
- światło APA
- światło Bolt
- światło Clas Ohlson
- światło RADEMACHER
- światło Ecolight
- światło Cocraft
- światło Lupine
- światło XQ-lite
- światło REVO
- światło Varta
- światło XCell
- światło Perfect Christmans
- światło SWIT
- światło Lume Cube
- światło Profoto
- światło SmallRig
- światło Fiilex
- światło Digipower
- światło Light4Me
- światło El Home
- światło Anslut
- światło Eglo
- światło Logik
- światło Maxxmee
- światło Chacon
- światło Kress
- światło Genaray
- światło Adam Hall
- światło Xline
- światło Rebel
- światło Sonoff
- światło Mirpol
- światło Yorkville
- światło Neewer
- światło Litepanels
- światło ColorKey
- światło Portman
- światło Manfrotto
- światło CSL
- światło Bearware
- światło Blizzard
- światło Jinbei
- światło Heitronic
- światło Paulmann
- światło Obsidian
- światło JMAZ Lighting
- światło Amaran
- światło Enttec
- światło Fotodiox
- światło EXO
- światło Altman
- światło Kartell
Najnowsze instrukcje dla światło
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024