Instrukcja obsługi SSV Works BR-DS10U


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SSV Works BR-DS10U (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
BR-DS10U
2021-Up Ford Bronco
Subwoofer Enclosure, 10” - Unloaded
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or
workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in
material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against
defects in material or workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
BRONCO SUB WOOFER ENCLOSURE PARTS LIST
PARTS LIST IMAGES
Body Bracket, 4-Door, Soft Top
[B-MB3145]
Bronco Sub Enclosure
Lower Housing Bracket
[B-MB3142]
Body Bracket, 4-Door, Hard
Top [B-MB3144]
Upper Housing Bracket
[B-MB3141]
TOOLS NEEDED FOR INSTALLATION - T30 Torx Wrench
BRONCO SUBWOOFER ENCLOSURE ASSEMBLY
A. Attach the upper and lower housing brackets to the subwoofer
enclosure using (10) M6x1x16mm screws and washers.
2
- Phillips Screw Driver
B. Install the subwoofer and grill using (18) #7x1.25” screws included
in the kit. Note that the subwoofer enclosure is mounted in the
vehicle vertically. Align the subwoofer and grill logo accordingly.
BA
Hardware Pack
[B-HP3146]
Spacer [B-MB3143]
Hardware Pack, #7x1.25(x8)
[B-HP#7-8]
3
A B
A. Working at the driver side cargo space, remove the plastic panel under
the window. Plastic panel will not be used and should be set aside.
B. The plastic panel is held in place by (4) clips.
C
C. Install the body bracket to the factory weld nuts using the (2) M8x1.25x20 button head screws and washers included in kit. The Bronco sub kit
includes a body bracket for hard top and soft top models. See C1 & C2 for bracket differentiation.
TOOLS NEEDED FOR INSTALLATION - 5mm Hex Driver
BRONCO SUBWOOFER ENCLOSURE INSTALLATION
- 13mm &15mm Socket Wrench
D
D. Remove the factory driver side tie down anchor using a 12mm
socket wrench.
C2
C1
E
E. Line up the spacer (B-MB3143) to the factory threads.
Soft Top
Hard Top


Specyfikacje produktu

Marka: SSV Works
Kategoria: Niesklasyfikowane
Model: BR-DS10U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SSV Works BR-DS10U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane SSV Works

SSV Works

SSV Works RZ4-2KRC Instrukcja

25 Września 2024
SSV Works

SSV Works RZ3-DM3 Instrukcja

25 Września 2024
SSV Works

SSV Works WP3-RZOA Instrukcja

25 Września 2024
SSV Works

SSV Works GN-5A Instrukcja

25 Września 2024
SSV Works

SSV Works CM-DM3 Instrukcja

25 Września 2024
SSV Works

SSV Works RZ3-3A Instrukcja

25 Września 2024
SSV Works

SSV Works RG4-5KRC Instrukcja

25 Września 2024
SSV Works

SSV Works RG4-DM3 Instrukcja

25 Września 2024
SSV Works

SSV Works X3-DM3 Instrukcja

25 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane