Instrukcja obsługi SPT SF-1816

SPT Wentylator SF-1816

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SPT SF-1816 (4 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
SAFETY PRECAUTIONS
Please read all instructions before using this product. Save these instructions for future reference.
When using electrical appliances, basic precautions should always be followed to reduce
breakage, risk of re, electric shock and injury to persons including the following:
To avoid fire or shock hazard, this unit should ONLY be plugged into a polarized 120 volt AC
outlet.
Never use this fan unless it is fully assembled.
Do no use the fan under the following conditions.
o High temperature of over 104°F.
o High humidity.
o Steam lled room.
Do not push nger or any object through the grille and do not touch the blade during use.
Be cautious that curtains or other objects are not sucked into the fan during operation.
Do not immerse the unit or any part of it in water or any other liquid.
Unplug the appliance when not in use.
Place appliance on a leveled surface.
Do not spray the fan with insecticide, which will damage the surface.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to t in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not t, contact a qualified electrician.
Do not attempt to defeat this safety feature.
Do not use appliance with a damaged cord. Contact Sunpentown Customer Service at 909-
468-5288.
WARNING: Unplug unit before disassembly, maintenance or cleaning.
WARNING: To reduce the risk of re or electric shock, do not use this unit with any solid-state
speed control device.
SPECIFICATIONS
MODEL INPUT POWER WEIGHT
SF-1816 120V / 60Hz 79W 10 lbs
MAINTANENCE
WARNING: Turn unit o and unplug before any maintenance.
Clean unit with a moistened soft cloth only. DO NOT pour or splash water on the unit or use
any abrasive type cleaner. Clean all external surfaces, especially the front and rear grilles.
PARTS IDENTIFICATION
INSTALLATION
WARNING: Do not plug in appliance until unit is fully assembled.
1. Install the Extension Tube onto the head assembly and secure by tightening the Lock Nut.
(Head assembly is pre-assembled, consists of front & rear grilles, fan blade and motor head)
2. Attach each leg to the Shaft Base’s Attachment Points, tighten screw to secure.
OPERATION
0 = OFF
1 = LOW
2 = MEDIUM
3 = HIGH
Control knob can turn in either direction.
Press down on the Oscillation Knob to oscillate fan.
Pull up on the Oscillation Knob for xed fan direction.
To adjust height, loosen the Height Lock Nut and adjust
to desired height; tighten Height Lock Nut.
Height is adjustable from 2.5 to 3 ft.
FRONT
GRILLE
NUT
FAN BLADE
GRILLE
LOCK
SHAFT BASE
LEG ATTACHMENT POINTS
FOUR-LEGGED
BASE
GRILLE SET
(FROTN & REAR)
REAR GRILLE
OSCILLATION KNOB
MOTOR HEAD HOUSING
MOTOR HEAD
HEAD
HEAD REST
LOCK NUT
EXTENSION TUBE
HEIGHT LOCK NUT
POWER CORD
RUBBER FEET
COVERS


Specyfikacje produktu

Marka: SPT
Kategoria: Wentylator
Model: SF-1816

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SPT SF-1816, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wentylator SPT

SPT

SPT SF-1691C Instrukcja

20 Września 2024
SPT

SPT SF-1816 Instrukcja

16 Września 2024
SPT

SPT SF-1666M Instrukcja

16 Września 2024
SPT

SPT SF-3312M Instrukcja

15 Września 2024
SPT

SPT SF-16T07 Instrukcja

13 Września 2024
SPT

SPT SF-16W81 Instrukcja

12 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator